{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18LH2033MA6D","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18LH2033MA6D","canonicalUrl":"https://aoctrl.com/schneider/BEH18LH2033MA6D","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18LH2033MA6D","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18LH2033MA6D Lexium 18 servo motor, 2 kW nominal output power, 6.37 Nm continuous stall torque, 3000 rpm, IP67, 17-bit magnetic multi-turn encoder, without holding brake.","salesMarkdown":"## Lexium 18 servo motor — 2 kW, 6.37 Nm, IP67 The BEH18LH2033MA6D is a 2 kW servo motor from Schneider Electric's Lexium 18 range, delivering 6.37 Nm continuous stall torque at 3000 rpm nominal speed on a three-phase 380 V supply. The 17-bit magnetic multi-turn encoder provides absolute position feedback without a battery backup — the multi-turn count is retained through the magnetic gear train, not a counter that drains on power loss. Rated IP67, the motor body and connector interface withstand washdown environments — the sealing is at the housing and the mating connector face, not just the shaft seal. The 100 mm Asian-standard flange and 24 mm shaft with parallel key match the mounting pattern common on compact packaging and material-handling axes. ## Torque, inertia, and mechanical limits Maximum radial force at the shaft is 686 N, axial force 196 N — these set the bearing life limit for belt-pulley or leadscrew loads. The 10-pole design keeps cogging torque low at low speeds, which matters for positioning moves where the motor must hold position without a brake. Continuous stall current is 7.05 A; maximum current is 21.15 A at 2 kW, 380 V. The torque constant of 0.904 N·m/A at 40 °C means the drive must supply roughly 7 A to hold rated torque — the drive's continuous current rating should match or exceed this figure, not just the motor's nominal power.","metaTitle":"Schneider Electric BEH18LH2033MA6D Lexium 18 Servo Motor","metaDescription":"Schneider Electric BEH18LH2033MA6D Lexium 18 servo motor, 2 kW nominal power, 6.37 Nm torque at 3000 rpm, IP67, 17-bit magnetic encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"167.4 mm","Range":"Lexium 18","Width":"100 mm","title":"BEH18LH2033MA6D","Height":"144.5 mm","Length":"167.4 mm","Inertia":"3.65 kg.cm²","Key width":"8 mm","Shaft end":"Parallel key","description":"BEH18 servo motor, Lexium 18, 380V,2.0kW,L100,17bit MAG MT","Encoder type":"Magnetic encoder","Second shaft":"Without second shaft end","Shaft length":"45 mm","Feedback type":"17 bits magnetic multi turn encoder","Holding brake":"Without","Nominal speed":"3000 rpm, 380 V, three phase","Rotor inertia":"3.65 kg.cm²","Nominal torque":"6.37 N.m, 380 V, three phase","Product weight":"5.3 kg","Shaft diameter":"24 mm","Torque constant":"0.904 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"2000 W","Mounting support":"Asian standard flange","Back emf constant":"63.36 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"100 mm","Peak stall torque":"19.11 N.m, 380 V, three phase","Maximum current Irms":"21.15 A at 2 kW, 380 V","Nominal output power":"2000 W, 380 V, three phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"6.37 N.m, 380 V, three phase","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Mounting holes diameter":"9 mm","Continuous stall current":"7.05 A","Maximum mechanical speed":"3000 rpm","Network number of phases":"Three phase","Number of mounting holes":"4","Maximum permanent current":"21.15 A","Product or component type":"Servo motor","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"380 V","Ambient air temperature for operation":"0...40 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/5db42506a0803ecc0007b6cb3ca09e5d.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18LH2033MA6D/beh18-servo-motor-lexium-18-380v2-0kwl10017bit-mag-mt/"},"ai":{"faq":[{"question":"What is the holding brake status on BEH18LH2033MA6D?","answer":"This variant ships without a holding brake. For applications requiring a brake to hold the load at power-off, a different Lexium 18 order code with the brake option is needed — the frame and encoder options may differ."},{"question":"What compliance documentation does Schneider Electric provide for BEH18LH2033MA6D?","answer":"The motor carries IP67 ingress protection and is designed for three-phase 380 V systems. Standard Schneider documentation includes the product data sheet and installation manual; specific RoHS, REACH, or UL declarations are available through the manufacturer's documentation portal or upon request at RFQ."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18LH2033MA6D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18LH2033MA6D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}