{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18LH2033MF6D","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18LH2033MF6D","canonicalUrl":"https://aoctrl.com/schneider/BEH18LH2033MF6D","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18LH2033MF6D","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium 18 BEH18 series servo motor with brake, 2000 W nominal output, 3000 rpm, 6.37 N.m nominal torque, 8 N.m holding brake, IP67, 17-bit magnetic multi-turn encoder.","salesMarkdown":"## Motor dimensions and mounting The BEH18LH2033MF6D measures 196 mm in depth, 100 mm in width, and 144.5 mm in height, with a motor flange size of 100 mm. It mounts on an Asian standard flange using 9 mm diameter holes. The shaft is 24 mm in diameter with a 45 mm parallel key end, rated for a maximum radial force of 686 N and axial force of 196 N. This guides bearing life calculations for belt or direct-coupled loads. ## Torque and speed profile Rated for 2 kW continuous output at 3000 rpm on a 380 V three-phase supply, this motor delivers 6.37 N.m nominal torque and a peak stall torque of 19.11 N.m. The continuous stall torque is also 6.37 N.m, meaning the motor can hold full rated torque at zero speed without overheating. The holding brake provides 8 N.m of holding torque, sufficient to keep the load stationary when power is removed — essential for vertical-axis applications where the load must not drift. ## Encoder and feedback Feedback comes from a 17-bit magnetic multi-turn encoder, giving 131,072 counts per revolution and absolute position tracking over multiple turns. This eliminates the need for a home cycle on power-up in most applications. The torque constant is 0.904 N.m/A at 40 °C, and the back EMF constant is 63.36 V/krpm — both needed for drive tuning and current-loop setup. ## Environmental and electrical ratings IP67 protection means the motor body and connector are sealed against dust and temporary immersion — suitable for washdown environments or outdoor installation without a secondary enclosure. The motor draws a continuous stall current of 7.05 A and a maximum current of 21.15 A at 2 kW, 380 V. The 10-pole design gives a smooth torque output at low speeds, typical for direct-drive applications.","metaTitle":"Schneider Electric BEH18LH2033MF6D Servo Motor, 2 kW","metaDescription":"Schneider Electric BEH18LH2033MF6D Lexium 18 servo motor, 2 kW, 3000 rpm, 6.37 N.m nominal torque, 8 N.m holding brake, IP67, 17-bit magnetic encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"196 mm","Range":"Lexium 18","Width":"100 mm","title":"BEH18LH2033MF6D","Height":"144.5 mm","Length":"196 mm","Inertia":"4.4 kg.cm²","Key width":"8 mm","Shaft end":"Parallel key","description":"BEH18 servo motor, Lexium 18, 380V,2.0kW,L100,17bit MAG MT,brake","Encoder type":"Magnetic encoder","Second shaft":"Without second shaft end","Shaft length":"45 mm","Feedback type":"17 bits magnetic multi turn encoder","Holding brake":"With","Nominal speed":"3000 rpm, 380 V, three phase","Rotor inertia":"4.4 kg.cm²","Holding torque":"8 N.m","Nominal torque":"6.37 N.m, 380 V, three phase","Product weight":"6.1 kg","Shaft diameter":"24 mm","Torque constant":"0.904 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"2000 W","Mounting support":"Asian standard flange","Back emf constant":"63.36 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"100 mm","Peak stall torque":"19.11 N.m, 380 V, three phase","Maximum current Irms":"21.15 A at 2 kW, 380 V","Nominal output power":"2000 W, 380 V, three phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"6.37 N.m, 380 V, three phase","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Mounting holes diameter":"9 mm","Continuous stall current":"7.05 A","Maximum mechanical speed":"3000 rpm","Network number of phases":"Three phase","Number of mounting holes":"4","Maximum permanent current":"21.15 A","Product or component type":"Servo motor","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"380 V","Ambient air temperature for operation":"0...40 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ae2886582c52f3310b8455447c53056c.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18LH2033MF6D/beh18-servo-motor-lexium-18-380v2-0kwl10017bit-mag-mtbrake/"},"ai":{"faq":[{"question":"What is the holding brake torque on this motor?","answer":"The holding brake provides 8 N.m of holding torque, adequate for vertical-load holding when the drive is disabled."},{"question":"How can I order BEH18LH2033MF6D?","answer":"Availability and pricing confirmed at the time of quote."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18LH2033MF6D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18LH2033MF6D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}