{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18LM3033CA6D","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18LM3033CA6D","canonicalUrl":"https://aoctrl.com/schneider/BEH18LM3033CA6D","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18LM3033CA6D","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18LM3033CA6D, Lexium 18 servo motor, 3 kW continuous power, 9.8 Nm nominal torque, 3000 rpm, 23-bit optic multi-turn encoder, IP67, without brake, Asian standard flange.","salesMarkdown":"## Sizing this servo for the load The BEH18LM3033CA6D delivers 3 kW continuous output power at 380 V three-phase supply, with a nominal torque of 9.8 N.m at 3000 rpm. That torque rating is the continuous stall torque as well — same 9.8 N.m figure — so the motor holds full rated torque at zero speed without thermal derating, which matters for positioning holds and tensioning applications. Peak stall torque reaches 29.4 N.m at 380 V, giving a 3:1 overload margin for acceleration transients. The torque constant is 0.967 N.m/A at 40 °C, so the continuous stall current of 10.13 A maps directly to the 9.8 N.m continuous torque; peak current draw hits 30.39 A at the 3 kW rating. ## Feedback and environmental sealing Feedback comes from a 23-bit optic multi-turn encoder — 8,388,608 counts per revolution with absolute position tracking over multiple shaft turns. No battery-backed memory required for position retention on power-down; the multi-turn count is mechanically geared. This encoder type suits applications that need position recovery after a power cycle without a home-search routine. The motor carries an IP67 rating on both the housing and the connector interface — the two male/female connectors are sealed at the mating face. This makes it suitable for washdown zones and wet environments where coolant or cleaning sprays hit the motor body. Air-cooled, no external blower needed. ## Mounting and mechanical interface Mounting uses an Asian standard flange with a 130 mm square pilot and four 9 mm mounting holes. The shaft is 28 mm diameter with a parallel key (8 mm key width), 63 mm shaft length, and no second shaft end. Maximum radial force at the shaft is 686 N; maximum axial force is 196 N — stay within these limits to avoid bearing overload, especially with belt drives or overhung loads.","metaTitle":"Schneider Electric BEH18LM3033CA6D Servo Motor, 3 kW, 9.8 Nm","metaDescription":"Schneider Electric BEH18LM3033CA6D Lexium 18 servo motor, 3 kW continuous power, 9.8 Nm nominal torque, 3000 rpm, IP67, 23-bit optic encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"192.9 mm","Range":"Lexium 18","Width":"130 mm","title":"BEH18LM3033CA6D","Height":"174.5 mm","Length":"192.9 mm","Inertia":"7.28 kg.cm²","Key width":"8 mm","Shaft end":"Parallel key","description":"BEH18 servo motor, Lexium 18, 380V,3.0kW,L130,23bit, OPT MT","Encoder type":"Optic encoder","Second shaft":"Without second shaft end","Shaft length":"63 mm","Feedback type":"23 bits optic multi turn encoder","Holding brake":"Without","Nominal speed":"3000 rpm, 380 V, three phase","Rotor inertia":"7.28 kg.cm²","Nominal torque":"9.8 N.m, 380 V, three phase","Product weight":"9.9 kg","Shaft diameter":"28 mm","Torque constant":"0.967 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"3000 W","Mounting support":"Asian standard flange","Back emf constant":"69.11 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"130 mm","Peak stall torque":"29.4 N.m, 380 V, three phase","Maximum current Irms":"30.39 A at 3 kW, 380 V","Nominal output power":"3000 W, 380 V, three phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"9.8 N.m, 380 V, three phase","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Mounting holes diameter":"9 mm","Continuous stall current":"10.13 A","Maximum mechanical speed":"3000 rpm","Network number of phases":"Three phase","Number of mounting holes":"4","Maximum permanent current":"30.39 A","Product or component type":"Servo motor","Speed feedback resolution":"8388608 points/turn","[Us] rated supply voltage":"380 V","Ambient air temperature for operation":"0...40 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f47f3dde8375450fceb43c8fae3dad02.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18LM3033CA6D/beh18-servo-motor-lexium-18-380v3-0kwl13023bit-opt-mt/"},"ai":{"faq":[{"question":"How do I order the BEH18LM3033CA6D and get a price?","answer":"This part is available to order through independent distribution. No stock-holding claim is made — each order is sourced against the BOM."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18LM3033CA6D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18LM3033CA6D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}