{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18LM3033MA6D","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18LM3033MA6D","canonicalUrl":"https://aoctrl.com/schneider/BEH18LM3033MA6D","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18LM3033MA6D","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18LM3033MA6D, Lexium 18 servo motor, 3 kW nominal output, 9.8 N.m continuous torque, 3000 rpm, 17-bit magnetic multi-turn absolute encoder, IP67, Asian standard flange 130 mm.","salesMarkdown":"## Torque and speed profile for the application The BEH18LM3033MA6D delivers 9.8 N.m continuous stall torque at 380 V three-phase, with the same figure as the nominal torque rating — meaning the motor can hold full rated torque at standstill without thermal derating. Peak stall torque reaches 29.4 N.m at 380 V, giving a 3:1 torque margin for acceleration and deceleration transients. Nominal speed is 3000 rpm, limited to 3000 rpm maximum mechanical speed. Continuous stall current is 10.13 A; maximum current Irms is 30.39 A at 3 kW, 380 V. The torque constant of 0.967 N.m/A at 40 °C lets you estimate required current for a given load torque. ## Feedback and mounting — what the encoder and flange tell you The 17-bit magnetic multi-turn absolute encoder provides position feedback without requiring a homing cycle after power loss — the motor knows its shaft position on restart. This is a magnetic type, tolerant to contamination and vibration compared to optical encoders. Motor flange size is 130 mm with an Asian standard flange pattern — 4 mounting holes at 9 mm diameter. Shaft diameter is 28 mm with a parallel key, shaft length 63 mm. No second shaft end, no holding brake. Maximum axial force Fa is 196 N; maximum radial force Fr is 686 N. These limits govern direct coupling to the load — belt drives or overhung loads must stay within these force envelopes. ## Environmental sealing and cooling IP67 protection means the motor body and shaft seal withstand washdown — suitable for food-and-bev lines, washdown zones, or outdoor installations without a secondary enclosure. Cooling is air-cooled via the motor surface.","metaTitle":"Schneider Electric BEH18LM3033MA6D Servo Motor, 3 kW","metaDescription":"Schneider Electric BEH18LM3033MA6D Lexium 18 servo motor, 3 kW nominal, 9.8 N.m continuous torque, 3000 rpm, IP67, 17-bit absolute encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"192.9 mm","Range":"Lexium 18","Width":"130 mm","title":"BEH18LM3033MA6D","Height":"174.5 mm","Length":"192.9 mm","Inertia":"7.28 kg.cm²","Key width":"8 mm","Shaft end":"Parallel key","description":"BEH18 servo motor, Lexium 18, 380V,3.0kW,L130,17bit MAG MT","Encoder type":"Magnetic encoder","Second shaft":"Without second shaft end","Shaft length":"63 mm","Feedback type":"17 bits magnetic multi turn encoder","Holding brake":"Without","Nominal speed":"3000 rpm, 380 V, three phase","Rotor inertia":"7.28 kg.cm²","Nominal torque":"9.8 N.m, 380 V, three phase","Product weight":"9.9 kg","Shaft diameter":"28 mm","Torque constant":"0.967 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"3000 W","Mounting support":"Asian standard flange","Back emf constant":"69.11 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"130 mm","Peak stall torque":"29.4 N.m, 380 V, three phase","Maximum current Irms":"30.39 A at 3 kW, 380 V","Nominal output power":"3000 W, 380 V, three phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"9.8 N.m, 380 V, three phase","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Mounting holes diameter":"9 mm","Continuous stall current":"10.13 A","Maximum mechanical speed":"3000 rpm","Network number of phases":"Three phase","Number of mounting holes":"4","Maximum permanent current":"30.39 A","Product or component type":"Servo motor","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"380 V","Ambient air temperature for operation":"0...40 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a58fa0bfab472db496d9523c3611bb84.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18LM3033MA6D/beh18-servo-motor-lexium-18-380v3-0kwl13017bit-mag-mt/"},"ai":{"faq":[{"question":"What is the BEH18LM3033MA6D's depth and mounting pattern?","answer":"Depth is 192.9 mm, width 130 mm, height 174.5 mm. The motor uses an Asian standard flange with 4 mounting holes at 9 mm diameter on a 130 mm flange size."},{"question":"What compliance documentation does Schneider Electric provide for the BEH18LM3033MA6D?","answer":"Standard Schneider documentation includes the product datasheet and installation manual. Compliance certifications (CE, UKCA, EAC) are typically listed on the nameplate; specific RoHS/REACH declarations are available from Schneider's documentation portal."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18LM3033MA6D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18LM3033MA6D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}