{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MD0233CA5C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MD0233CA5C","canonicalUrl":"https://aoctrl.com/schneider/BEH18MD0233CA5C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MD0233CA5C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18MD0233CA5C Lexium 18 servo motor, 200 W, 3000 rpm, 0.64 N.m, IP67, 23-bit optic multi-turn encoder, without brake, Asian standard flange 60 mm.","salesMarkdown":"## What this 200 W servo motor delivers The BEH18MD0233CA5C is a 200 W servo motor from the Lexium 18 range, built for applications needing precise speed and position control in a compact 60 mm flange package. It delivers 0.64 N.m nominal torque at 220 V single-phase, with a nominal speed of 3000 rpm and a maximum mechanical speed of 6000 rpm. The 23-bit optic multi-turn encoder provides 8388608 points per revolution of feedback resolution, giving the drive fine position data for tight registration or indexing moves. The IP67 rating means the motor body and connector seal against washdown — it's specced for food-and-bev or wet machining lines where coolant spray is constant. ## Mounting and mechanical fit This motor uses an Asian standard flange with a 60 mm square face and four mounting holes. The shaft is 14 mm diameter with a parallel key, 30 mm shaft length, and a 5.0 mm key width — standard for coupling to a ball screw or timing pulley in a 200 W class axis. Overall dimensions are 70.5 mm wide by 60 mm tall by 70.2 mm deep, so it fits in a tight envelope behind a linear guide carriage. No holding brake is fitted, so the load must be held by the drive's holding torque or an external brake when power is off. ## Electrical and thermal ratings that matter Continuous stall torque is 0.64 N.m at 220 V, with a continuous stall current of 1.45 A. Peak stall torque reaches 2.24 N.m, and the maximum permanent current is 4.6 A — this gives a 3.5× torque overload margin for acceleration or overcoming friction during a jam. Maximum axial force is 74 N and maximum radial force is 245 N — the radial limit governs belt-drive applications where the pulley overhangs the bearing. Air-cooled, so ensure free airflow around the finless housing; the IP67 seal means no fan, so thermal rise is conduction-limited through the flange. ## Sourcing and lifecycle status No stock-holding claim — quoted per request.","metaTitle":"Schneider Electric BEH18MD0233CA5C Servo Motor, 200 W","metaDescription":"Schneider Electric BEH18MD0233CA5C Lexium 18 servo motor, 200 W, 3000 rpm, 0.64 N.m, IP67, 23-bit encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"70.2 mm","Range":"Lexium 18","Width":"70.5 mm","title":"BEH18MD0233CA5C","Height":"60 mm","Length":"70.5 mm","Key width":"5.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 200W, 220V, M60, 23bit, OPT MT","Encoder type":"Optic encoder","Second shaft":"Without second shaft end","Shaft length":"30.0 mm","Feedback type":"23 bits optic multi turn encoder","Holding brake":"Without","Nominal speed":"3000 rpm, 220 V, single phase","Rotor inertia":"0.34 kg.cm²","Nominal torque":"0.64 N.m, 220 V","Shaft diameter":"14.0 mm","Torque constant":"0.441 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"200 W","Mounting support":"Asian standard flange","Back emf constant":"32 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"60 mm","Peak stall torque":"2.24 N.m, 220 V","Maximum current Irms":"4.6 A at 0.2 kW, 220 V","Nominal output power":"200 W, 220 V","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"74 N","Continuous stall torque":"0.64 N.m, 220 V","IP degree of protection":"IP67","Maximum radial force Fr":"245 N","Continuous stall current":"1.45 A","Maximum mechanical speed":"6000.0 rpm","Network number of phases":"1","Number of mounting holes":"4","Maximum permanent current":"4.6 A","Product or component type":"Servo motor","Speed feedback resolution":"8388608 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"5.5 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0f0b954ecb922f823b53e39463a6de16.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MD0233CA5C/servo-motor-beh18-lexium-18-200w-220v-m60-23bit-opt-mt/"},"ai":{"faq":[{"question":"What is the feedback resolution on this motor?","answer":"The 23-bit optic multi-turn encoder provides 8388608 points per revolution of speed feedback resolution. This gives the drive fine position data for tight registration or indexing moves."},{"question":"Does this motor include a holding brake?","answer":"No, the BEH18MD0233CA5C is specified without a holding brake. The load must be held by the drive's holding torque or an external brake when power is removed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MD0233CA5C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MD0233CA5C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}