{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MD0233MA5C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MD0233MA5C","canonicalUrl":"https://aoctrl.com/schneider/BEH18MD0233MA5C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MD0233MA5C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium 18 BEH18MD0233MA5C servo motor, 200 W continuous power, 0.64 N.m nominal torque, 3000 rpm, 17-bit magnetic multi-turn encoder, IP67, without holding brake, Asian standard flange 60 mm.","salesMarkdown":"## 200 W, 3000 rpm — sizing the continuous duty point The BEH18MD0233MA5C delivers 200 W continuous power at 220 V single-phase input, with a nominal torque of 0.64 N.m at 3000 rpm. That torque figure is the continuous stall torque at 220 V — the motor can hold that load indefinitely without tripping the thermal model in the Lexium 18 drive. Peak stall torque reaches 2.24 N.m at 220 V, giving a 3.5× overload margin for acceleration or intermittent loads. The maximum mechanical speed ceiling is 6000 rpm, but the continuous operating point stays at 3000 rpm; running above that derates the torque per the drive's current limit. ## IP67 and flange dimensions — mounting in wet or washdown zones IP67 rating means the motor body and shaft seal withstand dust ingress and temporary immersion — suitable for food processing, beverage filling, or outdoor conveyor lines where washdown is routine. The sealing is at the connector and shaft face, not just the housing. Asian standard flange with 60 mm square mounting face, four mounting holes, and a 14 mm shaft diameter with 30 mm shaft length and parallel key. The overall envelope is 70.5 mm wide by 70.2 mm deep by 60 mm high — fits the standard Lexium 18 frame footprint for direct retrofit into existing machine bases. Maximum axial force Fa is 74 N and maximum radial force Fr is 245 N — these are the bearing load limits at the shaft centre. Exceeding them shortens bearing life; a belt drive or direct coupling should be aligned within these forces to avoid premature failure. ## 17-bit multi-turn encoder — position feedback for closed-loop control The magnetic multi-turn encoder provides 131072 points per revolution (17 bits) and tracks absolute position over multiple turns without a battery backup. This resolution gives a theoretical position error of about 0.01° per count — adequate for most positioning axes without a separate external encoder. Speed feedback resolution at 131072 points/turn means the drive can regulate speed down to a few rpm with stable velocity loop bandwidth. The torque constant is 0.441 N.m/A at 40 °C, and the back EMF constant is 32 V/krpm at 40 °C — these constants allow the drive to calculate the motor's electrical angle and current demand without a separate Hall sensor. Continuous stall current is 1.45 A, with a maximum permanent current of 4.6 A — the drive's current loop must be set to limit at the lower continuous value for thermal protection. The maximum current Irms is specified at 0.2 kW, 220 V, meaning the drive's peak current capability should match this for the overload cycle. ## Active production — no lifecycle risk for new designs The motor connects via two male/female connectors — these are the standard Lexium 18 power and feedback connectors, compatible with the matching drive cables. No holding brake is fitted, so the load must be held by the drive's holding torque or an external brake for vertical axes.","metaTitle":"Schneider Electric BEH18MD0233MA5C Servo Motor, 200 W","metaDescription":"Schneider Electric BEH18MD0233MA5C Lexium 18 servo motor, 200 W continuous power, 0.64 N.m nominal torque at 220 V single phase, 17-bit magnetic multi-turn","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"70.2 mm","Range":"Lexium 18","Width":"70.5 mm","title":"BEH18MD0233MA5C","Height":"60 mm","Length":"70.5 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 200W, 220V, M60, 17bit, MAG MT","Encoder type":"Magnetic encoder","Shaft length":"30.0 mm","Feedback type":"17 bits magnetic multi turn encoder","Holding brake":"Without","Nominal speed":"3000 rpm, 220 V, single phase","Rotor inertia":"0.34 kg.cm²","Nominal torque":"0.64 N.m, 220 V, single phase","Product weight":"0.8 kg","Shaft diameter":"14.0 mm","Torque constant":"0.441 N.m/A at 40 °C","lifecycle_stage":"current","Continuous power":"200 W","Mounting support":"Asian standard flange","Back emf constant":"32 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"60 mm","Peak stall torque":"2.24 N.m, 220 V, single phase","Maximum current Irms":"at 0.2 kW, 220 V","Nominal output power":"200 W, 220 V, single phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"74 N","Continuous stall torque":"0.64 N.m, 220 V, single phase","IP degree of protection":"IP67","Maximum radial force Fr":"245 N","Continuous stall current":"1.45 A","Maximum mechanical speed":"6000.0 rpm","Network number of phases":"3","Number of mounting holes":"4","Maximum permanent current":"4.6 A","Product or component type":"Servo motor","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"5.5 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e0e5062f76c019e940b351b6aaeab7ef.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MD0233MA5C/servo-motor-beh18-lexium-18-200w-220v-m60-17bit-mag-mt/"},"ai":{"faq":[{"question":"What is the BEH18MD0233MA5C's continuous torque and power at 220 V?","answer":"Continuous torque is 0.64 N.m at 220 V single phase, with a continuous power rating of 200 W. The peak stall torque reaches 2.24 N.m for acceleration loads."},{"question":"What is the IP rating and flange size of the BEH18MD0233MA5C?","answer":"IP67 rated for washdown and dust ingress. The flange is Asian standard 60 mm square, with a 14 mm shaft diameter and 30 mm shaft length, parallel key."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MD0233MA5C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MD0233MA5C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}