{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MF1033CF5C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MF1033CF5C","canonicalUrl":"https://aoctrl.com/schneider/BEH18MF1033CF5C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MF1033CF5C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium 18 BEH18MF1033CF5C servo motor with brake, 1000 W continuous power at 220 V single-phase, 3000 rpm nominal speed, 3.18 N.m nominal torque, 23-bit optic multi-turn encoder, IP67, Asian standard flange 80 mm.","salesMarkdown":"## 1000 W at 220 V single-phase — continuous torque rating The BEH18MF1033CF5C delivers 1000 W continuous output power from a single-phase 220 V supply, with a nominal torque of 3.18 N.m and a continuous stall torque of the same 3.18 N.m. This means the motor can hold full rated torque at standstill indefinitely without overheating — a useful characteristic for indexing or clamping applications where the motor must hold position under load between moves. The peak stall torque reaches 11.13 N.m, providing a 3.5x overload margin for acceleration or transient loads, provided the drive can supply the corresponding peak current of 21 A. ## Integrated holding brake and 23-bit multi-turn encoder The motor includes a holding brake rated at 3.2 N.m, which engages when power is removed — this holds the load on a vertical axis or during an E-stop without relying on the drive to maintain DC bus voltage. The 23-bit optic multi-turn encoder provides absolute position feedback across 8,388,608 counts per revolution and tracks multiple shaft rotations, so the machine does not require a homing sequence after a power cycle. The encoder resolution supports high-precision positioning down to sub-arcminute levels, limited by the mechanical stiffness of the coupling and load. ## IP67 sealed construction and Asian standard flange The motor carries an IP67 rating, meaning the housing and connector interface are protected against dust ingress and temporary immersion in water — suitable for washdown environments in food processing or packaging lines. The mounting flange conforms to the Asian standard 80 mm flange pattern (four mounting holes), with a shaft diameter of 19.0 mm and a parallel key of 6.0 mm width. The overall dimensions — 142.1 mm wide, 80 mm high, 89.9 mm deep — define the clearance envelope in the machine frame. Maximum axial force is 147 N and maximum radial force is 392 N, which sets the allowable belt tension or direct-coupling load on the shaft bearings.","metaTitle":"Schneider Electric BEH18MF1033CF5C Servo Motor, 1000 W","metaDescription":"Schneider Electric BEH18MF1033CF5C Lexium 18 servo motor, 1000 W at 220 V single-phase, 3000 rpm, 3.18 N.m nominal torque, integrated holding brake, IP67","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"89.9 mm","Range":"Lexium 18","Width":"142.1 mm","title":"BEH18MF1033CF5C","Height":"80 mm","Length":"142.1 mm","Key width":"6.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 1.0kW, 220V, M80, 23bit, OPT MT, brake","Encoder type":"Optic encoder","Second shaft":"Without second shaft end","Shaft length":"35.0 mm","Feedback type":"23 bits optic multi turn encoder","Holding brake":"With","Nominal speed":"3000 rpm, 220 V, single phase","Rotor inertia":"2.28 kg.cm²","Holding torque":"3.2 N.m","Nominal torque":"3.18 N.m, 220 V, single phase","Product weight":"3.27 kg","Shaft diameter":"19.0 mm","Torque constant":"0.539 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"1000 W","Mounting support":"Asian standard flange","Back emf constant":"33.9 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"80 mm","Peak stall torque":"11.13 N.m, 220 V, single phase","Maximum current Irms":"21 A at 1.0 kW, 220 V","Nominal output power":"1000 W, 220 V, single phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"147 N","Continuous stall torque":"3.18 N.m, 220 V, single phase","IP degree of protection":"IP67","Maximum radial force Fr":"392 N","Continuous stall current":"5.9 A","Maximum mechanical speed":"6000.0 rpm","Network number of phases":"1","Number of mounting holes":"4","Maximum permanent current":"21 A","Product or component type":"Servo motor","Speed feedback resolution":"8388608 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"6.4 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f75f9356949f31ae8015e590b8da0d45.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MF1033CF5C/servo-motor-beh18-lexium-18-1-0kw-220v-m80-23bit-opt-mt-brake/"},"ai":{"faq":[{"question":"What is the BEH18MF1033CF5C holding brake torque?","answer":"The integrated holding brake is rated at 3.2 N.m. This brake holds the motor shaft when power is removed, sufficient to secure a vertical load or prevent back-driving during an E-stop. The brake engages mechanically — no drive power is needed to maintain holding force."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MF1033CF5C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MF1033CF5C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}