{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MF1033MF5C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MF1033MF5C","canonicalUrl":"https://aoctrl.com/schneider/BEH18MF1033MF5C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MF1033MF5C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium 18 BEH18MF1033MF5C servo motor, 1000 W, 3000 rpm, 3.18 N.m nominal torque, 3.2 N.m holding brake, IP67, 17-bit magnetic multi-turn encoder, Asian standard flange 80 mm.","salesMarkdown":"## Lexium 18 servo motor — 1 kW with holding brake The BEH18MF1033MF5C is a 1000 W servo motor from Schneider Electric's Lexium 18 range, delivering 3.18 N.m nominal torque at 220 V and a nominal speed of 3000 rpm. The integrated holding brake provides 3.2 N.m of holding torque, so vertical-axis loads stay put when the drive is off — no external brake resistor or mechanical lock needed. The 17-bit magnetic multi-turn encoder gives 131,072 points per turn of absolute position feedback — enough for precise positioning without a home cycle on power-up, as long as the battery-backed multi-turn count is maintained. ## Fit and mounting — Asian standard flange, IP67 sealed The motor uses an 80 mm Asian standard flange with four mounting holes, a 19 mm shaft diameter with parallel key, and a 35 mm shaft length. The overall body measures 142.1 mm wide by 80 mm tall by 89.9 mm deep — compact enough for tight machine envelopes where the motor sits close to the load. IP67 rating means the motor body and shaft seal withstand washdown — suitable for food-and-bev lines, packaging machines, or any environment where hoses and spray are part of the cleaning cycle. ## Torque and current — continuous vs peak capability Continuous stall torque is 3.18 N.m at 220 V, with a continuous stall current of 5.9 A. For short-duration moves, the peak stall torque reaches 11.13 N.m at 220 V — about 3.5× the continuous rating, which handles acceleration and deceleration without oversizing the motor for the average load. The torque constant is 0.539 N.m/A at 40 °C, and the back EMF constant is 33.9 V/krpm at the same temperature. Maximum permanent current is 21 A, and the maximum mechanical speed is 6000 rpm — though the nominal 3000 rpm is where the motor delivers its rated power. The electrical connection uses two male/female connectors — a power connector and a feedback/brake connector. The 10-pole motor design and 3-phase winding at 220 V are standard for the Lexium 18 family, so the drive pairing is straightforward with Schneider's Lexium 28 or 32 series drives.","metaTitle":"Schneider Electric BEH18MF1033MF5C Servo Motor, 1 kW","metaDescription":"Schneider Electric BEH18MF1033MF5C Lexium 18 servo motor, 1 kW continuous, 3.18 N.m nominal torque, 3000 rpm, IP67, with holding brake and 17-bit magnetic","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"89.9 mm","Range":"Lexium 18","Width":"142.1 mm","title":"BEH18MF1033MF5C","Height":"80 mm","Length":"142.1 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 1.0kW, 220V, M80, 17bit, MAG MT, brake","Encoder type":"Magnetic encoder","Shaft length":"35.0 mm","Feedback type":"17 bits magnetic multi turn encoder","Holding brake":"With","Nominal speed":"3000 rpm, 220 V, single phase","Rotor inertia":"2.28 kg.cm²","Holding torque":"3.2 N.m","Nominal torque":"3.18 N.m, 220 V","Shaft diameter":"19.0 mm","Torque constant":"0.539 N.m/A at 40 °C","lifecycle_stage":"current","Continuous power":"1000 W","Mounting support":"Asian standard flange","Back emf constant":"33.9 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"80 mm","Peak stall torque":"11.13 N.m, 220 V","Maximum current Irms":"at 1.0 kW, 220 V","Nominal output power":"1000 W, 220 V","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"147 N","Continuous stall torque":"3.18 N.m, 220 V","IP degree of protection":"IP67","Maximum radial force Fr":"392 N","Continuous stall current":"5.9 A","Maximum mechanical speed":"6000.0 rpm","Network number of phases":"3","Number of mounting holes":"4","Maximum permanent current":"21 A","Product or component type":"Servo motor","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"6.4 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0708a7bae1e0e2215f3a26b4578c2bd3.pdf","sourceUrl":"https://www.se.com/my/en/product/BEH18MF1033MF5C/servo-motor-beh18-lexium-18-1-0kw-220v-m80-17bit-mag-mt-brake/"},"ai":{"faq":[{"question":"What is the holding brake torque on BEH18MF1033MF5C?","answer":"The holding brake provides 3.2 N.m of holding torque — sufficient to hold a vertical-axis load at standstill without power applied to the motor windings."},{"question":"What IP rating does this servo motor have?","answer":"IP67 — the motor body and shaft seal are protected against dust ingress and temporary immersion in water, making it suitable for washdown environments in food processing or packaging lines."},{"question":"What encoder feedback does BEH18MF1033MF5C use?","answer":"A 17-bit magnetic multi-turn encoder with 131,072 points per turn resolution. The multi-turn capability provides absolute position over multiple revolutions, eliminating the need for a home cycle on each power-up as long as the battery-backed count is maintained."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MF1033MF5C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MF1033MF5C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}