{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MM0813CF6D","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MM0813CF6D","canonicalUrl":"https://aoctrl.com/schneider/BEH18MM0813CF6D","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MM0813CF6D","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18MM0813CF6D, Lexium 18 servo motor with brake, 850 W continuous power, 1500 rpm nominal speed, 5.39 N.m nominal torque, 16.0 N.m holding brake, IP67, 23-bit optic multi-turn encoder.","salesMarkdown":"## 850 W servo with integrated holding brake The BEH18MM0813CF6D is a Lexium 18 servo motor delivering 850 W continuous power at 1500 rpm nominal speed (380 V three-phase). The 16.0 N.m holding brake means this motor holds position on a vertical axis without a separate brake resistor or external mechanical lock — the brake engages when power is removed, so a Z-axis or gravity-loaded load stays put during a power loss or E-stop. The 23-bit optic multi-turn encoder gives 8,388,608 counts per revolution absolute position feedback — the motor knows its shaft angle even after a power cycle, so homing sequences on startup are unnecessary. This matters on a packaging or material-handling line where the machine must resume from the last known position after a shift change or power interruption. ## Torque and thermal limits for the application Nominal torque is 5.39 N.m at 380 V; peak stall torque reaches 16.17 N.m — the motor can deliver nearly 3× rated torque briefly for acceleration or overcoming static friction. The torque constant of 1.706 N.m/A at 40 °C means the drive must supply about 3.16 A continuous stall current to hold rated torque at standstill. IP67 rating means the motor body and shaft seal withstand washdown — suitable for food-and-beverage lines or wet machining environments where coolant spray is constant. The air-cooled design relies on natural convection; in a confined enclosure with multiple motors, check the ambient temperature stays below the motor's thermal limit at full load. ## Mounting and mechanical interface Asian standard flange, 130 mm square, with four mounting holes. The shaft is 22 mm diameter with a parallel key (key width 8.0 mm, shaft length 58.0 mm) — this is a standard metric keyed shaft for timing pulleys or coupling to a leadscrew. Maximum radial force is 686 N and maximum axial force is 196 N; belt-drive applications should keep belt tension within these limits to avoid bearing overload.","metaTitle":"Schneider Electric BEH18MM0813CF6D Servo Motor, 850 W","metaDescription":"Schneider Electric BEH18MM0813CF6D Lexium 18 servo motor with brake, 850 W, 1500 rpm, IP67, 23-bit multi-turn encoder. Active production, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"174.5 mm","Range":"Lexium 18","Width":"167.6 mm","title":"BEH18MM0813CF6D","Height":"130 mm","Length":"167.6 mm","Key width":"8.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 850W, 380V, M130, 23bit, OPT MT, brake","Encoder type":"Optic encoder","Second shaft":"Without second shaft end","Shaft length":"58.0 mm","Feedback type":"23 bits optic multi turn encoder","Holding brake":"With","Nominal speed":"1500 rpm, 380 V, three phase","Rotor inertia":"14.56 kg.cm²","Holding torque":"16.0 N.m","Nominal torque":"5.39 N.m, 380 V, three phase","Product weight":"7.6 kg","Shaft diameter":"22.0 mm","Torque constant":"1.706 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"850 W","Mounting support":"Asian standard flange","Back emf constant":"108.1 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"130 mm","Peak stall torque":"16.17 N.m, 380 V, three phase","Maximum current Irms":"9.48 A at 0.85 kW, 380 V","Nominal output power":"850 W, 380 V, three phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"5.39 N.m, 380 V, three phase","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Continuous stall current":"3.16 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"3","Number of mounting holes":"4","Maximum permanent current":"9.48 A","Product or component type":"Servo motor","Speed feedback resolution":"8388608 points/turn","[Us] rated supply voltage":"380 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"9 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/af755ec083e9c51cc2cd4c2543f4c75e.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MM0813CF6D/servo-motor-beh18-lexium-18-850w-380v-m130-23bit-opt-mt-brake/"},"ai":{"faq":[{"question":"What is BEH18MM0813CF6D's listed depth?","answer":"The depth is 174.5 mm. This is the dimension from the mounting face to the rear of the motor housing, not including the connector protrusion."},{"question":"What is the holding brake torque on this servo motor?","answer":"The holding brake is rated 16.0 N.m. This is the static torque the brake applies when de-energized — sufficient to hold a vertical load that would otherwise drop under gravity."},{"question":"How can I order BEH18MM0813CF6D or check availability?","answer":"Submit an RFQ for current pricing and lead time — availability is confirmed at quote time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MM0813CF6D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MM0813CF6D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}