{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MM0813MA6C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MM0813MA6C","canonicalUrl":"https://aoctrl.com/schneider/BEH18MM0813MA6C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MM0813MA6C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18MM0813MA6C Lexium 18 servo motor, 850 W, 1500 rpm, 5.39 N.m nominal torque, 17-bit magnetic multi-turn encoder, IP67, Asian-standard flange, without holding brake.","salesMarkdown":"## Motion profile and feedback — holds the micron The BEH18MM0813MA6C: Rated 850 W continuous power at 220 V, three-phase, with a nominal speed of 1500 rpm and a nominal torque of 5.39 N.m. Peak stall torque reaches 16.17 N.m at 220 V, giving headroom for acceleration transients in positioning moves. The 17-bit magnetic multi-turn encoder provides 131072 points per turn of speed feedback resolution. On a machine axis this means the servo loop closes cleanly — no jitter, repeatable shot after shot. ## Mounting and integration — Asian-standard flange, IP67 sealed The motor flange size is 130 mm, with a 22 mm shaft diameter and a parallel key shaft end. The Asian-standard flange pattern uses four mounting holes on a 9 mm bolt circle — confirm the mating face on your gearbox or load before committing. Overall envelope: depth 174.5 mm, width 136.6 mm, height 130 mm. The IP67 rating means the motor body and shaft seal withstand washdown — suitable for food-and-bev lines or wet-floor environments.","metaTitle":"Schneider Electric BEH18MM0813MA6C Lexium 18 Servo Motor","metaDescription":"Schneider Electric BEH18MM0813MA6C Lexium 18 servo motor, 850 W continuous power, 1500 rpm, 17-bit magnetic encoder, IP67.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"174.5 mm","Range":"Lexium 18","Width":"136.6 mm","title":"BEH18MM0813MA6C","Height":"130 mm","Length":"136.6 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 850W, 220V, M130, 17bit, MAG MT","Encoder type":"Magnetic encoder","Shaft length":"58.0 mm","Feedback type":"17 bits magnetic multi turn encoder","Holding brake":"Without","Nominal speed":"1500 rpm, 220 V, single phase","Rotor inertia":"13.62 kg.cm²","Nominal torque":"5.39 N.m, 220 V","Shaft diameter":"22.0 mm","Torque constant":"0.898 N.m/A at 40 °C","lifecycle_stage":"current","Continuous power":"850 W","Mounting support":"Asian standard flange","Back emf constant":"62.73 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"130 mm","Peak stall torque":"16.17 N.m, 220 V","Maximum current Irms":"at 0.85 kW, 220 V","Nominal output power":"850 W, 220 V","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"5.39 N.m, 220 V","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Continuous stall current":"6 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"3","Number of mounting holes":"4","Maximum permanent current":"18 A","Product or component type":"Servo motor","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"9 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ded983bbb4a3afef2439879deefec5fe.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MM0813MA6C/servo-motor-beh18-lexium-18-850w-220v-m130-17bit-mag-mt/"},"ai":{"faq":[{"question":"What is the torque constant and back EMF constant of BEH18MM0813MA6C?","answer":"The torque constant is 0.898 N.m/A at 40 °C, and the back EMF constant is 62.73 V/krpm at 40 °C. These values are used to tune the drive current loop and set the velocity feed-forward."},{"question":"What is the maximum mechanical speed of BEH18MM0813MA6C?","answer":"The maximum mechanical speed is 3000 rpm. The nominal speed is 1500 rpm at 220 V; overspeed capability is available but limited by the mechanical bearings and rotor balance."},{"question":"What compliance documentation does Schneider Electric provide for BEH18MM0813MA6C?","answer":"The motor carries an IP67 degree of protection. Standard compliance documentation (RoHS, REACH, CE, UL) is provided with the product — confirm specific certification requirements at RFQ."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MM0813MA6C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MM0813MA6C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}