{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MM1023CF6C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MM1023CF6C","canonicalUrl":"https://aoctrl.com/schneider/BEH18MM1023CF6C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MM1023CF6C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18MM1023CF6C, Lexium 18 servo motor, 1 kW, 2000 rpm, 4.77 Nm nominal torque, 16 Nm holding brake, IP67, 23-bit optic multi-turn encoder.","salesMarkdown":"The BEH18MM1023CF6C is a 1 kW servo motor from the Lexium 18 family, rated 2000 rpm nominal speed at 220 V single-phase input. That 2000 rpm base speed suits applications like conveyors, indexing tables, and packaging machinery where moderate speed with precise position holding is required. Nominal torque is 4.77 N·m at 220 V, with a continuous stall torque matching that figure — so the motor can hold full rated torque at zero speed without overheating, as long as the cooling airflow is maintained. Peak stall torque reaches 14.31 N·m, giving a 3× overload margin for acceleration transients. ## Integrated holding brake and feedback — fit for vertical-axis safety A holding brake is built in, rated 16.0 N·m holding torque. This locks the rotor when power is removed — critical for vertical-axis loads (e.g., pick-and-place Z axes, elevating conveyors) that must not drift on power loss. Feedback comes from a 23-bit optic multi-turn encoder. The multi-turn absolute tracking means the controller knows the shaft position even after a power cycle, eliminating the need for a homing sequence on restart. The optic encoder resolution (23-bit = 8,388,608 counts per revolution) gives fine position granularity for precise velocity and position loops. ## IP67 enclosure and Asian-standard flange — washdown-ready mounting Rated IP67, the motor body and shaft seal withstands water ingress and dust — suitable for washdown environments in food processing, beverage lines, or outdoor material handling. The connector interface uses two male/female connectors, maintaining the seal when mated. Mounting uses an Asian-standard flange with a 130 mm flange size and four mounting holes. The shaft is 22 mm diameter with a parallel key (8 mm key width, 58 mm shaft length), matching common Asian-spec gearboxes and pulleys. The BEH18MM1023CF6C is listed as current production (active lifecycle stage).","metaTitle":"Schneider Electric BEH18MM1023CF6C Servo Motor, 1 kW","metaDescription":"Schneider Electric BEH18MM1023CF6C Lexium 18 servo motor, 1 kW, 2000 rpm, 4.77 Nm nominal torque, 16 Nm holding brake, IP67, 23-bit optic encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"174.5 mm","Range":"Lexium 18","Width":"167.6 mm","title":"BEH18MM1023CF6C","Height":"130 mm","Length":"167.6 mm","Key width":"8.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 1.0kW, 220V, M130, 23bit, OPT MT, brake","Encoder type":"Optic encoder","Second shaft":"Without second shaft end","Shaft length":"58.0 mm","Feedback type":"23 bits optic multi turn encoder","Holding brake":"With","Nominal speed":"2000 rpm, 220 V, single phase","Rotor inertia":"14.56 kg.cm²","Holding torque":"16.0 N.m","Nominal torque":"4.77 N.m, 220 V","Shaft diameter":"22.0 mm","Torque constant":"0.898 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"1000 W","Mounting support":"Asian standard flange","Back emf constant":"62.73 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"130 mm","Peak stall torque":"14.31 N.m, 220 V","Maximum current Irms":"15.93 A at 1.0 kW, 220 V","Nominal output power":"1000 W, 220 V","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"4.77 N.m, 220 V","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Continuous stall current":"5.31 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"1","Number of mounting holes":"4","Maximum permanent current":"15.93 A","Product or component type":"Servo motor","Speed feedback resolution":"8388608 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"9 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7f0389ccb0e72a46929eeeea080cb46c.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MM1023CF6C/servo-motor-beh18-lexium-18-1-0kw-220v-m130-23bit-opt-mt-brake/"},"ai":{"faq":[{"question":"What is the holding torque of the brake on BEH18MM1023CF6C?","answer":"The integrated holding brake is rated at 16.0 N·m. This is the torque it can hold at standstill when power is removed, sufficient for vertical-axis loads up to that torque value."},{"question":"What compliance documentation does Schneider Electric provide for BEH18MM1023CF6C?","answer":"The motor carries an IP67 ingress protection rating. Standard Schneider documentation includes the product datasheet and installation manual; CE marking applies for the EU market. Specific RoHS, REACH, or UL documentation should be confirmed at RFQ — the evidence does not list those certificates explicitly for this order code."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MM1023CF6C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MM1023CF6C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}