{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MM1023MF6C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MM1023MF6C","canonicalUrl":"https://aoctrl.com/schneider/BEH18MM1023MF6C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MM1023MF6C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18MM1023MF6C, Lexium 18 series, servo motor with brake, 1 kW continuous power, 4.77 N·m nominal torque at 220 V, 17-bit magnetic multi-turn encoder, IP67, air-cooled, Asian standard flange.","salesMarkdown":"## What the 1 kW rating means for your axis The BEH18MM1023MF6C is a 1 kW servo motor from the Lexium 18 range, delivering 4.77 N·m nominal torque at 220 V single-phase input. That continuous torque number is what you size the axis against — the peak stall torque of 14.31 N·m is available for acceleration transients but not sustained duty. The 17-bit magnetic multi-turn encoder gives absolute position feedback, so the drive knows the shaft angle at power-up without a homing move. That saves a cycle on every machine start — useful on indexing tables or pick-and-place axes where lost time is lost throughput. ## Holding brake and vertical-axis safety A holding brake is integrated, rated at 16.0 N·m static torque. That brake holds the load when power is removed — critical on vertical axes where a free-falling load is a safety and machine-damage risk. The brake engages when the motor drive is de-energized; it is not a dynamic braking resistor for deceleration. IP67 sealing means the motor body and the connector interface resist dust ingress and water jets. That suits washdown zones in food processing or outdoor conveyor sections where coolant spray is routine. The connector O-ring is the wet-end seal — verify the mating cordset is also rated IP67 to maintain the enclosure. ## Mounting and mechanical fit The motor uses an Asian standard flange with a 130 mm square face and four mounting holes. Shaft diameter is 22.0 mm with a parallel key (8.0 mm key width) and 58.0 mm shaft length. Maximum radial force on the shaft is 686 N; maximum axial force is 196 N. Exceed those and the bearing life drops fast — belt-drive or overhung-load applications need a force calculation before committing the BOM.","metaTitle":"Schneider Electric BEH18MM1023MF6C Lexium 18 Servo Motor","metaDescription":"Schneider Electric BEH18MM1023MF6C servo motor, 1 kW, 4.77 N·m nominal torque, 17-bit multi-turn encoder, holding brake, IP67.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"174.5 mm","Range":"Lexium 18","Width":"167.6 mm","title":"BEH18MM1023MF6C","Height":"130 mm","Length":"167.6 mm","Key width":"8.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 1.0kW, 220V, M130, 17bit, MAG MT, brake","Encoder type":"Magnetic encoder","Second shaft":"Without second shaft end","Shaft length":"58.0 mm","Feedback type":"17 bits magnetic multi turn encoder","Holding brake":"With","Nominal speed":"2000 rpm, 220 V, single phase","Rotor inertia":"14.56 kg.cm²","Holding torque":"16.0 N.m","Nominal torque":"4.77 N.m, 220 V","Shaft diameter":"22.0 mm","Torque constant":"0.898 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"1000 W","Mounting support":"Asian standard flange","Back emf constant":"62.73 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"130 mm","Peak stall torque":"14.31 N.m, 220 V","Maximum current Irms":"15.93 A at 1.0 kW, 220 V","Nominal output power":"1000 W, 220 V","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"4.77 N.m, 220 V","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Continuous stall current":"5.31 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"1","Number of mounting holes":"4","Maximum permanent current":"15.93 A","Product or component type":"Servo motor","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"9 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6e5666772f6011d8f30aeb043999de1d.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MM1023MF6C/servo-motor-beh18-lexium-18-1-0kw-220v-m130-17bit-mag-mt-brake/"},"ai":{"faq":[{"question":"What is the holding torque of the brake on BEH18MM1023MF6C?","answer":"The integrated holding brake is rated at 16.0 N·m static torque. That holds the shaft stationary when the motor drive is de-energized — essential for vertical-axis load holding."},{"question":"What encoder feedback does BEH18MM1023MF6C use?","answer":"It uses a 17-bit magnetic multi-turn encoder. That provides absolute position feedback over multiple shaft revolutions, so the drive knows the position at power-up without a homing sequence."},{"question":"What is the IP rating of BEH18MM1023MF6C?","answer":"IP67 — the motor body and connector interface are sealed against dust ingress and water jets. Suitable for washdown environments in food processing or outdoor conveyor sections."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MM1023MF6C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MM1023MF6C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}