{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MM1523CA6C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MM1523CA6C","canonicalUrl":"https://aoctrl.com/schneider/BEH18MM1523CA6C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MM1523CA6C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18MM1523CA6C BEH18 servo motor, Lexium 18 series, 1.5 kW continuous power, 7.16 Nm nominal torque at 2000 rpm, 23-bit optic multi-turn encoder, IP67, Asian standard flange 130 mm.","salesMarkdown":"## Motor ratings and feedback for position-loop integrity The BEH18MM1523CA6C is a BEH18 servo motor from the Lexium 18 range, delivering 1.5 kW nominal output power at 220 V single-phase. Nominal torque is 7.16 N.m at 2000 rpm, with a continuous stall torque matching that figure — the motor holds rated torque at standstill without derating. Feedback comes from a 23-bit optic multi-turn encoder (8,388,608 points per revolution). That resolution supports smooth low-speed regulation and absolute position retention over multiple shaft turns, which matters for applications where the controller needs to know the load position after a power cycle without a homing routine. The 10-pole motor design gives a higher torque density than a standard 4- or 6-pole servo at the same frame size, but the drive must be configured for the pole count — the Lexium 18 drive family handles this natively. ## Sealing and mechanical integration for washdown zones IP67 rating on the motor body means it withstands temporary immersion and hose-directed water — suitable for food-and-bev lines, washdown stations, or outdoor conveyor sections where the motor sees direct spray. The connector interface uses two mating connectors; the seal integrity depends on the cable-side connector being IP67-rated as well. Mounting uses an Asian standard flange with a 130 mm flange size and four mounting holes. The shaft is 22 mm diameter with a parallel key, 58 mm shaft length, and the key width is 8.0 mm. Maximum radial force at the shaft is 686 N, axial force 196 N — stay within these limits to avoid bearing overload. Overall dimensions: width 152.6 mm, height 130 mm, depth 174.5 mm. No second shaft end, so no provision for an external encoder or brake on the rear — the holding brake option is not fitted on this variant. ## Sourcing and compliance documentation Compliance documentation expected from Schneider Electric includes RoHS and REACH declarations, UL/CSA recognition for the motor series, and IEC 60034 performance standards. The 23-bit encoder with multi-turn absolute feedback supports the audit-trail requirements for position data in GMP environments — the encoder retains position across power cycles without battery backup, which simplifies validation of the homing sequence.","metaTitle":"Schneider Electric BEH18MM1523CA6C Servo Motor, Lexium 18","metaDescription":"Schneider Electric BEH18MM1523CA6C BEH18 servo motor, 1.5 kW continuous, 7.16 Nm nominal torque at 2000 rpm, IP67, 23-bit optic multi-turn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"174.5 mm","Range":"Lexium 18","Width":"152.6 mm","title":"BEH18MM1523CA6C","Height":"130 mm","Length":"152.6 mm","Key width":"8.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 1.5kW, 220V, M130, 23bit, OPT MT","Encoder type":"Optic encoder","Second shaft":"Without second shaft end","Shaft length":"58.0 mm","Feedback type":"23 bits optic multi turn encoder","Holding brake":"Without","Nominal speed":"2000 rpm, 220 V, single phase","Rotor inertia":"19.95 kg.cm²","Nominal torque":"7.16 N.m, 220 V","Shaft diameter":"22.0 mm","Torque constant":"0.887 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"1500 W","Mounting support":"Asian standard flange","Back emf constant":"63.21 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"130 mm","Peak stall torque":"21.48 N.m, 220 V","Maximum current Irms":"24.21 A at 1.5 kW, 220 V","Nominal output power":"1500 W, 220 V","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"7.16 N.m, 220 V","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Continuous stall current":"8.07 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"1","Number of mounting holes":"4","Maximum permanent current":"24.21 A","Product or component type":"Servo motor","Speed feedback resolution":"8388608 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"9 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/934d7eec4230400bf65e1b4e6e438893.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MM1523CA6C/servo-motor-beh18-lexium-18-1-5kw-220v-m130-23bit-opt-mt/"},"ai":{"faq":[{"question":"What is the torque constant of the BEH18MM1523CA6C and why does it matter?","answer":"The torque constant is 0.887 N.m/A at 40 °C. This value lets the drive compute the actual motor torque from the current feedback — critical for current-loop tuning and for applications that require a known torque limit (e.g., press-fit or tension control)."},{"question":"What is the peak stall torque and maximum current for this motor?","answer":"Peak stall torque is 21.48 N.m at 220 V, with a maximum permanent current of 24.21 A. The continuous stall current is 8.07 A. The peak figure is available for short-duration acceleration or overload events; the drive's current limit must be set to protect the motor if the peak is sustained beyond the thermal time constant."},{"question":"What compliance documentation does Schneider Electric provide for the BEH18MM1523CA6C?","answer":"Standard Schneider documentation includes RoHS and REACH declarations. The motor carries IP67 ingress protection and the 23-bit multi-turn encoder is part of the Lexium 18 series which holds UL/CSA and IEC certifications. Full compliance packs are available from the manufacturer."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MM1523CA6C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MM1523CA6C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}