{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MM1523CF6C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MM1523CF6C","canonicalUrl":"https://aoctrl.com/schneider/BEH18MM1523CF6C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MM1523CF6C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18MM1523CF6C, Lexium 18 servo motor with brake, 1.5 kW (220 V), 2000 rpm nominal, IP67, 23-bit optic multi-turn encoder, Asian standard flange 130 mm.","salesMarkdown":"## 1.5 kW at 2000 rpm — sizing the axis The BEH18MM1523CF6C delivers 1.5 kW continuous output power at 2000 rpm nominal speed from a single-phase 220 V supply. That power band suits medium-duty indexing, conveyor, or packaging axes where the load torque stays under 7.16 N.m continuous (the continuous stall torque at 220 V). The integrated holding brake delivers 16.0 N.m holding torque — enough to hold a vertical load at rest without a separate brake resistor or external power-off brake. The brake is energized-to-release; power loss engages the brake, so the axis stops and holds on a fault or E-stop. Feedback is a 23-bit optic multi-turn encoder. 23 bits per revolution gives 8,388,608 counts per turn — position resolution fine enough for sub-arcminute angular accuracy in a direct-drive or low-ratio gearbox. Multi-turn tracking means the absolute position is known across power cycles without a homing move, provided the encoder battery (if fitted) is maintained. IP67 rating on the motor body and connector means the winding and encoder survive washdown — the sealing washer at the connector face and shaft lip seal keep water ingress out. This is the rating that decides fit for food-and-beverage, pharmaceutical, or outdoor conveyor lines where hose-down cleaning is routine. ## Mounting and mechanical interface The motor uses an Asian standard flange with a 130 mm flange size and four mounting holes — the same bolt pattern as common 130-frame servo mounts. The shaft is 22.0 mm diameter, 58.0 mm long, with a parallel key (8.0 mm key width). No second shaft end, so encoder or brake access is at the rear only. Maximum axial force on the shaft is 196 N; maximum radial force is 686 N. These set the allowable belt tension or coupling misalignment before the bearing life degrades. The 10-pole motor design keeps cogging torque low — relevant for smooth low-speed profiling without dither. Overall dimensions: 183.6 mm length (including shaft), 174.5 mm depth, 130 mm height, 183.6 mm width. Air-cooled — no external fan or liquid cooling required; the motor relies on natural convection and radiation from the finned housing. No official successor or cross-reference part exists — this is the active variant in the Lexium 18 family. The 23-bit multi-turn encoder and integrated brake are factory-configured; no field-upgrade path to a different feedback type.","metaTitle":"Schneider Electric BEH18MM1523CF6C Servo Motor with Brake","metaDescription":"Schneider Electric BEH18MM1523CF6C Lexium 18 servo motor with holding brake. 1.5 kW, 2000 rpm, IP67, 23-bit optic multi-turn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"174.5 mm","Range":"Lexium 18","Width":"183.6 mm","title":"BEH18MM1523CF6C","Height":"130 mm","Length":"183.6 mm","Key width":"8.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 1.5kW, 220V, M130, 23bit, OPT MT, brake","Encoder type":"Optic encoder","Second shaft":"Without second shaft end","Shaft length":"58.0 mm","Feedback type":"23 bits optic multi turn encoder","Holding brake":"With","Nominal speed":"2000 rpm, 220 V, single phase","Rotor inertia":"21.85 kg.cm²","Holding torque":"16.0 N.m","Nominal torque":"7.16 N.m, 220 V","Shaft diameter":"22.0 mm","Torque constant":"0.887 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"1500 W","Mounting support":"Asian standard flange","Back emf constant":"63.21 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"130 mm","Peak stall torque":"21.48 N.m, 220 V","Maximum current Irms":"24.21 A at 1.5 kW, 220 V","Nominal output power":"1500 W, 220 V","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"7.16 N.m, 220 V","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Continuous stall current":"8.07 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"1","Number of mounting holes":"4","Maximum permanent current":"24.21 A","Product or component type":"Servo motor","Speed feedback resolution":"8388608 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"9 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/481e9d389c8292086c94cb50e6a8e8c0.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MM1523CF6C/servo-motor-beh18-lexium-18-1-5kw-220v-m130-23bit-opt-mt-brake/"},"ai":{"faq":[{"question":"How do I get current pricing and availability for BEH18MM1523CF6C?","answer":"Submit an RFQ against your BOM quantity."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MM1523CF6C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MM1523CF6C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}