{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MM1523MF6C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MM1523MF6C","canonicalUrl":"https://aoctrl.com/schneider/BEH18MM1523MF6C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MM1523MF6C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18MM1523MF6C, Lexium 18 servo motor with holding brake, 1.5 kW nominal output, 2000 rpm, IP67, 16.0 N·m holding torque, 17-bit magnetic multi-turn encoder, Asian standard flange 130 mm.","salesMarkdown":"## Sizing the motor for the load The BEH18MM1523MF6C delivers 1.5 kW continuous power at 2000 rpm nominal speed on a single-phase 220 V supply — the torque constant is 0.887 N·m/A at 40 °C, so the continuous stall current of 8.07 A maps directly to 7.16 N·m continuous stall torque. The holding brake holds 16.0 N·m static torque, enough to keep a vertical axis from drifting when power is removed — the brake engages when the drive disables the motor, so the axis stays put during a power loss or E-stop. ## Mounting and environmental fit The motor uses an Asian standard flange with a 130 mm flange size and four mounting holes — the shaft is 22.0 mm diameter with a parallel key (key width 8.0 mm), shaft length 58.0 mm, and no second shaft end. Overall dimensions: 183.6 mm length (including shaft), 174.5 mm depth, 130 mm height, 183.6 mm width — the IP67 rating means the motor body and connectors withstand washdown, so it can be mounted directly on a food-processing or washdown conveyor without a secondary enclosure. Maximum radial force on the shaft is 686 N, maximum axial force is 196 N — these set the belt-pulley or coupling load limits; exceeding them shortens bearing life. ## Feedback and electrical interface The built-in 17-bit magnetic multi-turn encoder provides absolute position feedback over 131,072 counts per revolution — no homing cycle needed on power-up for applications that track position across power cycles. Electrical connection is via two connectors (male/female) — the motor has 10 poles and is air-cooled; the back EMF constant is 63.21 V/krpm at 40 °C, which sets the voltage ceiling at high speed.","metaTitle":"Schneider Electric BEH18MM1523MF6C Servo Motor, 1.5 kW, IP67","metaDescription":"Schneider Electric BEH18MM1523MF6C Lexium 18 servo motor with brake, 1.5 kW, 2000 rpm, IP67, 16 N·m holding torque, 17-bit encoder. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"174.5 mm","Range":"Lexium 18","Width":"183.6 mm","title":"BEH18MM1523MF6C","Height":"130 mm","Length":"183.6 mm","Key width":"8.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 1.5kW, 220V, M130, 17bit, MAG MT, brake","Encoder type":"Magnetic encoder","Second shaft":"Without second shaft end","Shaft length":"58.0 mm","Feedback type":"17 bits magnetic multi turn encoder","Holding brake":"With","Nominal speed":"2000 rpm, 220 V, single phase","Rotor inertia":"21.85 kg.cm²","Holding torque":"16.0 N.m","Nominal torque":"7.16 N.m, 220 V","Shaft diameter":"22.0 mm","Torque constant":"0.887 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"1500 W","Mounting support":"Asian standard flange","Back emf constant":"63.21 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"130 mm","Peak stall torque":"21.48 N.m, 220 V","Maximum current Irms":"24.21 A at 1.5 kW, 220 V","Nominal output power":"1500 W, 220 V","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"7.16 N.m, 220 V","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Continuous stall current":"8.07 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"1","Number of mounting holes":"4","Maximum permanent current":"24.21 A","Product or component type":"Servo motor","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"9 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/35ad334650bfa48fa7a079b00f414d06.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MM1523MF6C/servo-motor-beh18-lexium-18-1-5kw-220v-m130-17bit-mag-mt-brake/"},"ai":{"faq":[{"question":"What is the holding torque of the BEH18MM1523MF6C brake?","answer":"The holding brake delivers 16.0 N·m static torque, sufficient to hold a vertical axis load without drifting when power is removed."},{"question":"What is the IP rating of the BEH18MM1523MF6C?","answer":"IP67 — the motor body and connectors are sealed against dust ingress and temporary immersion, making it suitable for washdown environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MM1523MF6C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MM1523MF6C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}