{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MM1813CA6D","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MM1813CA6D","canonicalUrl":"https://aoctrl.com/schneider/BEH18MM1813CA6D","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MM1813CA6D","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18MM1813CA6D Lexium 18 servo motor, 1.8 kW, 11.5 N.m nominal torque at 1500 rpm, 23-bit optic multi-turn encoder, IP67, Asian standard flange 130 mm.","salesMarkdown":"## 1.8 kW at 1500 rpm — what the torque curve means for your axis The BEH18MM1813CA6D delivers 11.5 N.m nominal torque and 1.8 kW continuous power at 380 V three-phase, 1500 rpm. That torque constant of 1.636 N.m/A at 40 °C means the drive needs to supply about 7 A continuous stall current to hold position — the maximum permanent current is 21.09 A, which supports the 34.5 N.m peak stall torque for acceleration transients. The 23-bit optic multi-turn encoder gives 8,388,608 counts per revolution absolute position feedback — no homing cycle needed after power loss. This matters for applications where the axis must resume from the last commanded position without a reference move. ## IP67 and Asian standard flange — mounting constraints IP67 protection means the motor body withstands washdown — the shaft seal and connector interface are rated for hose-directed water. This suits food-and-bev or washdown conveyor lines where the motor is in the splash zone. The Asian standard flange (130 mm flange size, 4 mounting holes) matches the common Japanese/Taiwanese machine-tool interface — confirm your gearbox or mounting bracket uses the same bolt pattern before committing. The shaft is 22 mm diameter with a 58 mm parallel key (8 mm key width). Maximum radial force is 686 N, maximum axial force 196 N — stay within these limits for belt-drive or direct-coupling applications to avoid bearing overload. Overall dimensions: 168.6 mm width, 174.5 mm depth, 130 mm height. The 168.6 mm square body fits standard NEMA 56C frame footprints with adapter plates — verify the bolt-hole circle matches your existing mount. ## Sourcing — current lifecycle, quoted to order The motor uses two connectors (male/female) for power and feedback — the 23-bit encoder is a digital interface, likely Hiperface DSL or similar single-cable protocol. Confirm the mating connector part numbers and cable length with the drive specification before ordering.","metaTitle":"Schneider Electric BEH18MM1813CA6D Servo Motor, 1.8 kW","metaDescription":"Schneider Electric BEH18MM1813CA6D Lexium 18 servo motor, 1.8 kW continuous power, 11.5 N.m nominal torque at 1500 rpm, 23-bit optic multi-turn encoder, IP67","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"174.5 mm","Range":"Lexium 18","Width":"168.6 mm","title":"BEH18MM1813CA6D","Height":"130 mm","Length":"168.6 mm","Key width":"8.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 1.8kW, 380V, M130, 23bit, OPT MT","Encoder type":"Optic encoder","Second shaft":"Without second shaft end","Shaft length":"58.0 mm","Feedback type":"23 bits optic multi turn encoder","Holding brake":"Without","Nominal speed":"1500 rpm, 380 V, three phase","Rotor inertia":"24.78 kg.cm²","Nominal torque":"11.5 N.m, 380 V, three phase","Product weight":"8.7 kg","Shaft diameter":"22.0 mm","Torque constant":"1.636 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"1800 W","Mounting support":"Asian standard flange","Back emf constant":"110.11 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"130 mm","Peak stall torque":"34.5 N.m, 380 V, three phase","Maximum current Irms":"21.09 A at 1.8 kW, 380 V","Nominal output power":"1800 W, 380 V, three phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"11.5 N.m, 380 V, three phase","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Continuous stall current":"7.03 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"3","Number of mounting holes":"4","Maximum permanent current":"21.09 A","Product or component type":"Servo motor","Speed feedback resolution":"8388608 points/turn","[Us] rated supply voltage":"380 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"9 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/fcf2dce43798cc3aa57c8c7f4d04343f.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MM1813CA6D/servo-motor-beh18-lexium-18-1-8kw-380v-m130-23bit-opt-mt/"},"ai":{"faq":[{"question":"What compliance documentation does Schneider Electric provide for BEH18MM1813CA6D?","answer":"The evidence does not list specific compliance certifications (RoHS, REACH, UL, IEC) for this order code. As a current-production Schneider Electric servo motor in the Lexium 18 range, it typically carries CE and UKCA marking for the European market and may have UL recognition — request the declaration of conformity and certificate from the supplier at quote time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MM1813CA6D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MM1813CA6D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}