{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MM1813CF6C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MM1813CF6C","canonicalUrl":"https://aoctrl.com/schneider/BEH18MM1813CF6C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MM1813CF6C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium 18 BEH18MM1813CF6C servo motor, 1.8 kW, 1500 rpm, 23-bit optic multi-turn encoder, holding brake, IP67, Asian standard flange.","salesMarkdown":"## Motor specs that decide the fit The BEH18MM1813CF6C: Rated 1.8 kW continuous output at 220 V, three-phase, with a nominal speed of 1500 rpm and a nominal torque of 11.5 N.m. Peak stall torque hits 34.5 N.m at 220 V — this is the short-duration overload ceiling for acceleration or emergency stop, not the continuous rating. The 23-bit optic multi-turn encoder gives absolute position feedback over multiple shaft revolutions, so the drive knows the rotor angle at power-up without a homing move. Holding brake rated at 16.0 N.m static torque holds the load on a vertical axis when power is removed — no external brake resistor needed for the Z-axis. ## Mounting and mechanical interface Asian standard flange, 130 mm square, with four mounting holes — matches the common 130 mm frame footprint used across Lexium 18 motors. Shaft is 22 mm diameter with a parallel key (8.0 mm key width), 58 mm shaft length, no second shaft end — direct-couple to a load or gearbox. IP67 rating means the motor body and shaft seal withstand washdown — suitable for food processing or wet environments where coolant spray is present. ## Electrical and thermal limits Continuous stall current is 12.5 A; maximum permanent current is 36 A — the drive must be sized for the peak current during acceleration, not just the continuous figure. Torque constant 0.92 N.m/A at 40 °C means each amp of current produces just under 1 N.m of torque in the linear region — useful for calculating the current needed for a given load torque. Back EMF constant 63.35 V/krpm at 40 °C — at 3000 rpm the motor generates 190 V back EMF, which limits the bus voltage headroom for the drive.","metaTitle":"Schneider Electric BEH18MM1813CF6C Servo Motor, 1.8 kW","metaDescription":"Schneider Electric BEH18MM1813CF6C Lexium 18 servo motor, 1.8 kW, 1500 rpm, 23-bit optic multi-turn encoder, holding brake, IP67.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"174.5 mm","Range":"Lexium 18","Width":"199.6 mm","title":"BEH18MM1813CF6C","Height":"130 mm","Length":"199.6 mm","Key width":"8.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 1.8kW, 220V, M130, 23bit, OPT MT, brake","Encoder type":"Optic encoder","Second shaft":"Without second shaft end","Shaft length":"58.0 mm","Feedback type":"23 bits optic multi turn encoder","Holding brake":"With","Nominal speed":"1500 rpm, 220 V, single phase","Rotor inertia":"25.72 kg.cm²","Holding torque":"16.0 N.m","Nominal torque":"11.5 N.m, 220 V","Shaft diameter":"22.0 mm","Torque constant":"0.92 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"1800 W","Mounting support":"Asian standard flange","Back emf constant":"63.35 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"130 mm","Peak stall torque":"34.5 N.m, 220 V","Maximum current Irms":"36 A at 1.8 kW, 220 V","Nominal output power":"1800 W, 220 V","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"11.5 N.m, 220 V","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Continuous stall current":"12.5 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"3","Number of mounting holes":"4","Maximum permanent current":"36 A","Product or component type":"Servo motor","Speed feedback resolution":"8388608 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"9 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/028412cab02dc3a03cd799d1a40d5ba2.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MM1813CF6C/servo-motor-beh18-lexium-18-1-8kw-220v-m130-23bit-opt-mt-brake/"},"ai":{"faq":[{"question":"What is the holding torque of the brake on BEH18MM1813CF6C?","answer":"The holding brake is rated at 16.0 N.m static torque — sufficient to hold a vertical-axis load when power is removed."},{"question":"What compliance documentation is available for BEH18MM1813CF6C?","answer":"The motor carries IP67 protection and is part of the Schneider Electric Lexium 18 range; standard compliance documentation (RoHS, REACH, CE) is provided by the manufacturer."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MM1813CF6C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MM1813CF6C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}