{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MM1813MF6C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MM1813MF6C","canonicalUrl":"https://aoctrl.com/schneider/BEH18MM1813MF6C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MM1813MF6C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18MM1813MF6C, Lexium 18 servo motor, 1800 W, 11.5 N.m nominal torque, 16 N.m holding brake, 17-bit magnetic multi-turn encoder, IP67, 130 mm Asian standard flange.","salesMarkdown":"## 11.5 N.m at 1500 rpm — the sizing anchor for this servo The BEH18MM1813MF6C is a 1800 W servo motor from the Lexium 18 family, delivering 11.5 N.m nominal torque at 1500 rpm on a 220 V three-phase supply. That torque figure is the one you size the drive and the load coupling against — it's the continuous rating at the rated speed, not a peak number that disappears after a few seconds. The integrated 16 N.m holding brake holds vertical-axis loads without an external brake resistor or separate power supply — a line-down spare that saves panel space and wiring time on a replacement swap. ## 17-bit absolute encoder — no battery, no homing cycle The magnetic multi-turn encoder gives 131072 points per turn with absolute position retention across power cycles. No backup battery needed, so on a packaging line where the motor gets swapped during a shift change, the replacement comes up knowing where the axis is — no re-referencing the home sensor. The 10-pole rotor design gives higher torque density than an 8-pole equivalent at the same frame size — the 34.5 N.m peak stall torque is 3x the continuous rating, enough for aggressive acceleration profiles on indexing conveyors. ## IP67 and the 130 mm Asian flange — washdown-ready, common footprint The parallel key shaft end with 22 mm diameter and 58 mm shaft length mates to standard timing-pulley or coupling bores — no custom machining on a replacement motor. ## Active production — no lifecycle worry on this BOM line The 12.5 A continuous stall current and 36 A peak current are the numbers the drive needs to see for proper sizing — the drive's continuous rating must cover 12.5 A, and its peak rating must handle 36 A for the acceleration duty cycle.","metaTitle":"Schneider Electric BEH18MM1813MF6C Servo Motor, 1.8 kW","metaDescription":"Schneider Electric BEH18MM1813MF6C Lexium 18 servo motor, 1800 W, 11.5 N.m nominal torque, 16 N.m holding brake, 17-bit magnetic encoder, IP67.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"174.5 mm","Range":"Lexium 18","Width":"199.6 mm","title":"BEH18MM1813MF6C","Height":"130 mm","Length":"199.6 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 1.8kW, 220V, M130, 17bit, MAG MT, brake","Encoder type":"Magnetic encoder","Shaft length":"58.0 mm","Feedback type":"17 bits magnetic multi turn encoder","Holding brake":"With","Nominal speed":"1500 rpm, 220 V, single phase","Rotor inertia":"25.72 kg.cm²","Holding torque":"16 N.m","Nominal torque":"11.5 N.m, 220 V","Shaft diameter":"22.0 mm","Torque constant":"0.92 N.m/A at 40 °C","lifecycle_stage":"current","Continuous power":"1800 W","Mounting support":"Asian standard flange","Back emf constant":"63.35 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"130 mm","Peak stall torque":"34.5 N.m, 220 V","Maximum current Irms":"at 1.8 kW, 220 V","Nominal output power":"1800 W, 220 V","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"11.5 N.m, 220 V","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Continuous stall current":"12.5 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"3","Number of mounting holes":"4","Maximum permanent current":"36 A","Product or component type":"Servo motor","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"9 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c44884e6c93668a07e649a1fac1babed.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MM1813MF6C/servo-motor-beh18-lexium-18-1-8kw-220v-m130-17bit-mag-mt-brake/"},"ai":{"faq":[{"question":"What is the BEH18MM1813MF6C's continuous torque rating?","answer":"11.5 N.m at 220 V, 1500 rpm nominal speed. That's the continuous rating — the motor can hold that torque indefinitely at rated speed without overheating. The peak stall torque is 34.5 N.m for short-duration acceleration."},{"question":"Does the BEH18MM1813MF6C include a holding brake?","answer":"Yes, the integrated holding brake is rated 16 N.m. It holds the load when power is removed — no external brake module needed. The brake is part of the motor assembly, not an add-on kit."},{"question":"What encoder feedback does this motor use?","answer":"A 17-bit magnetic multi-turn absolute encoder, 131072 points per turn. It retains position across power cycles without a backup battery — the motor knows its absolute position on power-up."},{"question":"What is the IP rating and flange standard?","answer":"IP67 rated — sealed against dust and temporary immersion, suitable for washdown environments. The flange is the 130 mm Asian standard pattern, common across the Lexium 18 family."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MM1813MF6C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MM1813MF6C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}