{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MM2023CA6C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MM2023CA6C","canonicalUrl":"https://aoctrl.com/schneider/BEH18MM2023CA6C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MM2023CA6C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18MM2023CA6C, Lexium 18 series, servo motor, 2000 W, 9.55 Nm, 2000 rpm, IP67, 23-bit optic multi-turn encoder, Asian standard flange 130 mm.","salesMarkdown":"## 2000 W at 2000 rpm — the torque curve matters This BEH18MM2023CA6C delivers 2000 W continuous power at 2000 rpm nominal speed, with a nominal torque of 9.55 N.m at 220 V — the same figure as the continuous stall torque, so the motor holds full torque down to zero speed without derating. Peak stall torque hits 28.65 N.m at 220 V, giving a 3:1 overload margin for acceleration transients. The maximum mechanical speed is 3000 rpm, which sets the usable speed range above nominal before the bearings or rotor balance become the limit. ## 23-bit optic multi-turn — position feedback for closed-loop control The encoder is a 23-bit optic multi-turn type, giving 8388608 points per turn of speed feedback resolution. This means the drive sees position down to 0.15 arc-seconds per count — enough for precise indexing or contouring without a separate external encoder. The back EMF constant is 63.35 V/krpm at 40 °C, and the torque constant is 0.92 N.m/A at the same temperature. These two numbers let you calculate the voltage headroom and current demand for any operating point. At continuous stall current 10.38 A, the motor produces the rated 9.55 N.m; the maximum permanent current is 31.14 A, which corresponds to the peak torque. ## IP67 and Asian standard flange — panel fit for washdown zones IP67 protection means the motor body is dust-tight and withstands temporary immersion — suitable for food processing or washdown lines where hose-down cleaning is routine. The motor is air-cooled, so the IP67 rating depends on the cooling fan staying clear of debris. Maximum radial force on the shaft is 686 N, maximum axial force 196 N. These set the mechanical load limits for belt drives or direct coupling — exceeding them risks bearing damage or shaft deflection. ## No holding brake — plan for external braking or vertical loads This variant ships without a holding brake. For vertical-axis applications or any load that must hold position with power off, an external brake or a motor with the brake option is required. The electrical connection uses 2 connectors (male/female), so adding a brake module means a separate cable run. The motor has 10 poles and is a 3-phase design. Nominal speed is specified at 220 V single-phase input — the drive must supply the correct voltage and current profile. Maximum current is 31.14 A at 2.0 kW, 220 V, which sets the drive sizing floor.","metaTitle":"Schneider Electric BEH18MM2023CA6C Lexium 18 Servo Motor","metaDescription":"Schneider Electric BEH18MM2023CA6C Lexium 18 servo motor, 2000 W continuous power, 9.55 Nm nominal torque, 2000 rpm, IP67, 23-bit optic encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"174.5 mm","Range":"Lexium 18","Width":"168.6 mm","title":"BEH18MM2023CA6C","Height":"130 mm","Length":"168.6 mm","Key width":"8.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 2.0kW, 220V, M130, 23bit, OPT MT","Encoder type":"Optic encoder","Second shaft":"Without second shaft end","Shaft length":"58.0 mm","Feedback type":"23 bits optic multi turn encoder","Holding brake":"Without","Nominal speed":"2000 rpm, 220 V, single phase","Rotor inertia":"24.78 kg.cm²","Nominal torque":"9.55 N.m, 220 V","Shaft diameter":"22.0 mm","Torque constant":"0.92 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"2000 W","Mounting support":"Asian standard flange","Back emf constant":"63.35 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"130 mm","Peak stall torque":"28.65 N.m, 220 V","Maximum current Irms":"31.14 A at 2.0 kW, 220 V","Nominal output power":"2000 W, 220 V","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"9.55 N.m, 220 V","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Continuous stall current":"10.38 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"3","Number of mounting holes":"4","Maximum permanent current":"31.14 A","Product or component type":"Servo motor","Speed feedback resolution":"8388608 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"9 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/b7eec05de6ad5de286830348984a438b.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MM2023CA6C/servo-motor-beh18-lexium-18-2-0kw-220v-m130-23bit-opt-mt/"},"ai":{"faq":[{"question":"What is the torque and power rating of BEH18MM2023CA6C?","answer":"Continuous power is 2000 W, nominal torque is 9.55 N.m at 220 V, and peak stall torque reaches 28.65 N.m. Continuous stall torque matches the nominal at 9.55 N.m."},{"question":"What feedback encoder does BEH18MM2023CA6C use?","answer":"It uses a 23-bit optic multi-turn encoder with 8388608 points per turn of speed feedback resolution. This is a high-resolution position feedback suitable for precise servo control."},{"question":"Does BEH18MM2023CA6C include a holding brake?","answer":"No, this variant ships without a holding brake. For vertical-axis or power-off holding applications, an external brake or a motor with the brake option is required."},{"question":"What is the IP rating and flange type of BEH18MM2023CA6C?","answer":"IP67 rated — dust-tight and protected against temporary immersion. The flange is an Asian standard 130 mm size with 4 mounting holes and a 22 mm shaft with parallel key."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MM2023CA6C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MM2023CA6C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}