{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MM2023CA6D","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MM2023CA6D","canonicalUrl":"https://aoctrl.com/schneider/BEH18MM2023CA6D","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MM2023CA6D","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18MM2023CA6D servo motor, Lexium 18 series, 2 kW nominal power, 2000 rpm, 9.55 Nm continuous torque, IP67, 130 mm flange, 23-bit optic multi-turn encoder.","salesMarkdown":"## Motor specs that decide the fit The BEH18MM2023CA6D is a 2 kW servo motor from the Lexium 18 family, delivering 2000 rpm nominal speed and 9.55 Nm continuous stall torque at 380 V three-phase supply. Peak stall torque reaches 28.65 Nm, and the maximum mechanical speed is 3000 rpm — useful for short-duration acceleration or overspeed moves within the drive's limits. Feedback comes from a 23-bit optic multi-turn encoder, giving 8,388,608 counts per revolution absolute position — no homing cycle needed after power loss on multi-turn applications. ## Mounting and environmental fit The 130 mm Asian standard flange with four mounting holes and a 22 mm shaft with parallel key matches common mounting patterns for this frame size — check the pilot diameter and bolt circle against your existing bracket. Overall dimensions: 168.6 mm width, 130 mm height, 174.5 mm depth — the motor is compact for its power class but the depth includes the connector protrusion; measure clearance in the enclosure before committing. Air-cooled with no separate blower — ensure adequate airflow around the motor body in the installation, especially if mounted in a confined space or near heat sources. ## Electrical parameters for drive matching Continuous stall current is 5.84 A, maximum permanent current is 17.51 A at 2 kW — the drive must supply at least this peak current for short-term overloads without tripping. Torque constant is 1.635 Nm/A at 40 °C, and back EMF constant is 110.11 V/krpm — these let the drive calculate actual torque from current and predict bus voltage rise at high speed. The motor has 10 poles, so electrical frequency at 2000 rpm is about 167 Hz — the drive's current loop bandwidth must handle this without phase lag. Maximum axial force is 196 N, maximum radial force is 686 N — stay within these limits when coupling to the load; overhung loads from belt drives or heavy pulleys can exceed the radial rating.","metaTitle":"Schneider Electric BEH18MM2023CA6D Servo Motor, 2 kW","metaDescription":"Schneider Electric BEH18MM2023CA6D servo motor, 2 kW nominal, 2000 rpm, 9.55 Nm continuous torque, IP67, Lexium 18 series. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"174.5 mm","Range":"Lexium 18","Width":"168.6 mm","title":"BEH18MM2023CA6D","Height":"130 mm","Length":"168.6 mm","Key width":"8.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 2.0kW, 380V, M130, 23bit, OPT MT","Encoder type":"Optic encoder","Second shaft":"Without second shaft end","Shaft length":"58.0 mm","Feedback type":"23 bits optic multi turn encoder","Holding brake":"Without","Nominal speed":"2000 rpm, 380 V, three phase","Rotor inertia":"24.78 kg.cm²","Nominal torque":"9.55 N.m, 380 V, three phase","Product weight":"8.7 kg","Shaft diameter":"22.0 mm","Torque constant":"1.635 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"2000 W","Mounting support":"Asian standard flange","Back emf constant":"110.11 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"130 mm","Peak stall torque":"28.65 N.m, 380 V, three phase","Maximum current Irms":"17.51 A at 2.0 kW, 380 V","Nominal output power":"2000 W, 380 V, three phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"9.55 N.m, 380 V, three phase","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Continuous stall current":"5.84 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"3","Number of mounting holes":"4","Maximum permanent current":"17.51 A","Product or component type":"Servo motor","Speed feedback resolution":"8388608 points/turn","[Us] rated supply voltage":"380 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"9 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/8aa720e0359ad1fb253dc1c76b1a4241.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MM2023CA6D/servo-motor-beh18-lexium-18-2-0kw-380v-m130-23bit-opt-mt/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MM2023CA6D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MM2023CA6D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}