{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MR2413CA6C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MR2413CA6C","canonicalUrl":"https://aoctrl.com/schneider/BEH18MR2413CA6C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MR2413CA6C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium 18 BEH18MR2413CA6C servo motor, 2400 W, 1500 rpm, 15.28 Nm nominal torque, IP67, 23-bit optic multi-turn encoder, Asian standard flange.","salesMarkdown":"## Lexium 18 servo motor — 2.4 kW continuous, IP67 sealed The BEH18MR2413CA6C is a 2.4 kW servo motor from the Lexium 18 range, rated for 1500 rpm nominal speed and 15.28 Nm continuous stall torque at 220 V. The 23-bit optic multi-turn encoder delivers 8388608 points/turn feedback resolution, giving the drive precise position and velocity data for tight motion coordination. ## Torque, inertia, and load matching Nominal torque of 15.28 Nm at 220 V with a torque constant of 0.979 Nm/A at 40 °C means the drive current loop scales directly: for every amp of motor current, the shaft delivers just under 1 Nm. Peak stall torque reaches 45.84 Nm for acceleration and overload events, demanding up to 46.7 A from the drive at 2.4 kW. Maximum radial force Fr is 1470 N and maximum axial force Fa is 490 N — these set the bearing load limits for belt drives or direct coupling with overhung loads. Exceeding these will shorten bearing life. ## Shaft, flange, and mounting — Asian standard frame Motor flange size is 180 mm with 4 mounting holes on an Asian standard flange pattern — this matches the common frame size for regional machine builders in Asia. Shaft diameter is 35.0 mm with a parallel key (key width 10.0 mm) and shaft length 79.0 mm, providing a standard keyed coupling interface. Overall dimensions: length 172.5 mm, width 172.5 mm, height 180 mm, depth 226.5 mm. The depth includes the rear connector protrusion — ensure at least 50 mm clearance behind the motor for cable bend radius and connector access. No holding brake (without), so the motor relies on the drive's holding brake or an external mechanical brake for vertical-axis holding. No second shaft end means no through-shaft for an external encoder or manual crank. ## Feedback and electrical interface 23-bit optic multi-turn encoder provides 8388608 points per revolution — that is 23 bits of absolute position within one turn, plus multi-turn counts. This resolution supports sub-arc-minute positioning accuracy for indexing tables, gantries, and rotary axes. Back EMF constant is 63.98 V/krpm at 40 °C — at 1500 rpm the motor generates about 96 V line-to-line. The drive's DC bus must be high enough to overcome this voltage plus the IR drop at full load. Electrical connection uses 2 connectors (male/female) for power and feedback; the motor is 3-phase, 10-pole. Sourced to order against BOM quantities through independent distribution. No official cross-reference or direct second-source exists for this specific encoder and flange variant.","metaTitle":"Schneider Electric BEH18MR2413CA6C Servo Motor, 2400 W","metaDescription":"Schneider Electric BEH18MR2413CA6C Lexium 18 servo motor, 2400 W, 1500 rpm, 15.28 Nm torque, IP67, with 23-bit optic multi-turn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"226.5 mm","Range":"Lexium 18","Width":"172.5 mm","title":"BEH18MR2413CA6C","Height":"180 mm","Length":"172.5 mm","Key width":"10.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 2.4kW, 220V, M180, 23bit, OPT MT","Encoder type":"Optic encoder","Second shaft":"Without second shaft end","Shaft length":"79.0 mm","Feedback type":"23 bits optic multi turn encoder","Holding brake":"Without","Nominal speed":"1500 rpm, 220 V, single phase","Rotor inertia":"46.19 kg.cm²","Nominal torque":"15.28 N.m, 220 V","Shaft diameter":"35.0 mm","Torque constant":"0.979 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"2400 W","Mounting support":"Asian standard flange","Back emf constant":"63.98 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"180 mm","Peak stall torque":"45.84 N.m, 220 V","Maximum current Irms":"46.7 A at 2.4 kW, 220 V","Nominal output power":"2400 W, 220 V","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"490 N","Continuous stall torque":"15.28 N.m, 220 V","IP degree of protection":"IP67","Maximum radial force Fr":"1470 N","Continuous stall current":"15.6 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"3","Number of mounting holes":"4","Maximum permanent current":"46.7 A","Product or component type":"Servo motor","Speed feedback resolution":"8388608 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"13.5 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/5a13ddd3eebdb4b3f738b14bc7278ed3.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MR2413CA6C/servo-motor-beh18-lexium-18-2-4kw-220v-m180-23bit-opt-mt/"},"ai":{"faq":[{"question":"What is the IP rating of the BEH18MR2413CA6C and what does it mean for installation?","answer":"IP67 means the motor is dust-tight and protected against temporary immersion in water (up to 1 m for 30 minutes). This makes it suitable for washdown environments in food processing, packaging, or machining where coolant spray is present. The sealing relies on the connector being properly mated and the shaft seal intact."},{"question":"Does the BEH18MR2413CA6C have a holding brake?","answer":"No, this variant is specified without holding brake. For vertical-axis applications or any load that must hold position when power is removed, an external mechanical brake or the drive's holding torque function is required."},{"question":"What is the maximum current draw of the BEH18MR2413CA6C?","answer":"Maximum permanent current is 46.7 A RMS at 220 V, which corresponds to the peak stall torque condition. Continuous stall current is 15.6 A. The drive must be sized to supply at least the peak current for acceleration events."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MR2413CA6C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MR2413CA6C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}