{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MR2413MA6C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MR2413MA6C","canonicalUrl":"https://aoctrl.com/schneider/BEH18MR2413MA6C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MR2413MA6C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18MR2413MA6C, Lexium 18 servo motor, 2.4 kW, 1500 rpm, 15.28 Nm, IP67, 180 mm flange.","salesMarkdown":"## Torque and speed at the shaft The BEH18MR2413MA6C delivers 15.28 Nm nominal torque at 1500 rpm, 220 V single-phase input, with a continuous power rating of 2400 W. That torque constant of 0.979 Nm/A at 40 °C means for every amp of current you feed the windings, you get just under a newton-meter at the shaft — useful when sizing the drive's current loop. Peak stall torque hits 45.84 Nm at 220 V, so the motor can handle short overloads during acceleration or reversing without losing synchronism. The continuous stall torque matches the nominal at 15.28 Nm, with a continuous stall current of 15.6 A — that's the thermal limit for sustained holding. ## Feedback and mounting fit A 17-bit magnetic multi-turn encoder gives 131072 points per revolution of speed feedback resolution — enough for precise velocity and position loops in most servo applications. The encoder type is magnetic, so it's tolerant to light contamination and vibration compared to optical encoders. ## Environmental and electrical ratings IP67 protection means the motor body is dust-tight and can survive temporary immersion in water — suitable for washdown environments or outdoor installations where the motor sees direct spray. Cooling is air-cooled, so ensure adequate airflow around the housing; don't box it in without ventilation. Maximum mechanical speed is 3000 rpm, but the nominal speed is 1500 rpm — running above that continuously will exceed the torque curve. Maximum radial force on the shaft is 1470 N, maximum axial force 490 N — stay within these limits to avoid bearing damage. The motor is a 10-pole, 3-phase design with a back EMF constant of 63.98 V/krpm at 40 °C. That back EMF figure tells you the voltage the motor generates when spun by the load — important for drive bus voltage headroom during regenerative braking.","metaTitle":"Schneider Electric BEH18MR2413MA6C Servo Motor, 2.4 kW","metaDescription":"Schneider Electric BEH18MR2413MA6C Lexium 18 servo motor, 2.4 kW continuous power, 15.28 Nm torque, IP67. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"226.5 mm","Range":"Lexium 18","Width":"172.5 mm","title":"BEH18MR2413MA6C","Height":"180 mm","Length":"172.5 mm","Key width":"10.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 2.4kW, 220V, M180, 17bit, MAG MT","Encoder type":"Magnetic encoder","Second shaft":"Without second shaft end","Shaft length":"79.0 mm","Feedback type":"17 bits magnetic multi turn encoder","Holding brake":"Without","Nominal speed":"1500 rpm, 220 V, single phase","Rotor inertia":"46.19 kg.cm²","Nominal torque":"15.28 N.m, 220 V","Shaft diameter":"35.0 mm","Torque constant":"0.979 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"2400 W","Mounting support":"Asian standard flange","Back emf constant":"63.98 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"180 mm","Peak stall torque":"45.84 N.m, 220 V","Maximum current Irms":"46.7 A at 2.4 kW, 220 V","Nominal output power":"2400 W, 220 V","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"490 N","Continuous stall torque":"15.28 N.m, 220 V","IP degree of protection":"IP67","Maximum radial force Fr":"1470 N","Continuous stall current":"15.6 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"3","Number of mounting holes":"4","Maximum permanent current":"46.7 A","Product or component type":"Servo motor","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"13.5 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/18df7c8da02ba86dbfe9da9619621201.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MR2413MA6C/servo-motor-beh18-lexium-18-2-4kw-220v-m180-17bit-mag-mt/"},"ai":{"faq":[{"question":"What is the torque constant of BEH18MR2413MA6C?","answer":"The torque constant is 0.979 Nm/A at 40 °C, meaning each amp of current produces roughly 0.98 Nm of torque at the shaft."},{"question":"What is the IP rating of BEH18MR2413MA6C?","answer":"IP67 — dust-tight and protected against temporary immersion, suitable for washdown or outdoor use."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MR2413MA6C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MR2413MA6C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}