{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MR2413MA6D","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MR2413MA6D","canonicalUrl":"https://aoctrl.com/schneider/BEH18MR2413MA6D","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MR2413MA6D","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18MR2413MA6D, Lexium 18 servo motor, 2400 W continuous power, 15.28 Nm nominal torque at 380 V three-phase, IP67, 17-bit magnetic multi-turn encoder, Asian standard flange 180 mm.","salesMarkdown":"## Sizing the motor to the load — torque and power at 380 V The BEH18MR2413MA6D delivers 15.28 Nm nominal torque and 2400 W continuous output power at 380 V three-phase, which sets the steady-state capability for a direct-drive or geared axis. The continuous stall torque matches the nominal torque at 15.28 Nm, so the motor can hold rated torque at zero speed without derating. Peak stall torque reaches 45.84 Nm at 380 V, giving a 3:1 overload margin for acceleration, deceleration, or clearing a jam. The maximum permanent current is 25.48 A, which the drive must be sized to supply continuously. ## Encoder feedback and absolute positioning The 17-bit magnetic multi-turn encoder provides absolute position feedback over 131,072 counts per revolution and tracks multiple shaft turns without a backup battery — the multi-turn count is retained magnetically, not electronically. This eliminates the homing sequence on power-up for applications where the axis position must be known immediately. The torque constant is 1.8 Nm/A at 40 °C, and the back-EMF constant is 118.69 V/krpm at 40 °C. These values let the drive calculate the current-to-torque ratio and the velocity feedback scaling directly from the encoder. ## Environmental sealing and mounting constraints The motor is air-cooled, so the ambient air must carry away the heat; do not enclose it in a sealed shroud without forced ventilation. The Asian standard flange has a 180 mm flange size and four mounting holes. The shaft is 35 mm diameter with a 79 mm shaft length and a 10 mm parallel key. Maximum radial force is 1470 N and maximum axial force is 490 N — stay within these limits to avoid bearing damage.","metaTitle":"Schneider Electric BEH18MR2413MA6D Lexium 18 Servo Motor","metaDescription":"Schneider Electric BEH18MR2413MA6D Lexium 18 servo motor, 2400 W continuous power, 15.28 Nm nominal torque at 380 V, IP67, 17-bit magnetic multi-turn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"226.5 mm","Range":"Lexium 18","Width":"172.5 mm","title":"BEH18MR2413MA6D","Height":"180 mm","Length":"172.5 mm","Key width":"10.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 2.4kW, 380V, M180, 17bit, MAG MT","Encoder type":"Magnetic encoder","Second shaft":"Without second shaft end","Shaft length":"79.0 mm","Feedback type":"17 bits magnetic multi turn encoder","Holding brake":"Without","Nominal speed":"1500 rpm, 380 V, three phase","Rotor inertia":"46.19 kg.cm²","Nominal torque":"15.28 N.m, 380 V, three phase","Product weight":"14.3 kg","Shaft diameter":"35.0 mm","Torque constant":"1.8 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"2400 W","Mounting support":"Asian standard flange","Back emf constant":"118.69 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"180 mm","Peak stall torque":"45.84 N.m, 380 V, three phase","Maximum current Irms":"25.48 A at 2.4 kW, 380 V","Nominal output power":"2400 W, 380 V, three phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"490 N","Continuous stall torque":"15.28 N.m, 380 V, three phase","IP degree of protection":"IP67","Maximum radial force Fr":"1470 N","Continuous stall current":"8.49 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"3","Number of mounting holes":"4","Maximum permanent current":"25.48 A","Product or component type":"Servo motor","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"380 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"13.5 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/dc0d56f9de4705e2136ead074f8d6bca.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MR2413MA6D/servo-motor-beh18-lexium-18-2-4kw-380v-m180-17bit-mag-mt/"},"ai":{"faq":[{"question":"How can I order BEH18MR2413MA6D or check availability?","answer":"This part is sourced through independent distribution channels. Submit an RFQ for a firm lead time and volume price."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MR2413MA6D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MR2413MA6D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}