{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MR2913CA6C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MR2913CA6C","canonicalUrl":"https://aoctrl.com/schneider/BEH18MR2913CA6C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MR2913CA6C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18MR2913CA6C, Lexium 18 servo motor, 2.9 kW, 18.46 Nm nominal torque, 1500 rpm, IP67, 23-bit optic multi-turn encoder, 180 mm flange, 14.3 kg.","salesMarkdown":"## Frame and mounting — 180 mm Asian flange, IP67 sealed The BEH18MR2913CA6C is a 180 mm flange-size servo motor with a 35 mm shaft, parallel key, and four mounting holes on the Asian standard bolt pattern. Overall dimensions are 172.5 mm width, 180 mm height, and 226.5 mm depth — the depth includes the encoder housing and connector protrusion, so factor that into the enclosure clearance. Rated IP67 means the motor body and connector interface are sealed against dust and temporary immersion — it handles washdown on a food line or coolant splash on a machining center without an extra cover. ## Torque and speed — 18.46 Nm continuous, 55.38 Nm peak Continuous stall torque is 18.46 Nm at 220 V single-phase supply, with a peak stall torque of 55.38 Nm — the 3:1 peak-to-continuous ratio covers acceleration and load transients without oversizing the motor frame. Nominal speed is 1500 rpm, and the maximum mechanical speed is 3000 rpm, so the motor can run up to double base speed in field-weakening range if the drive supports it. Continuous power is 2.9 kW at 220 V. The torque constant is 0.982 Nm/A at 40 °C, and the back EMF constant is 63.98 V/krpm — these numbers tell you the current draw for a given torque and the voltage rise at speed, both needed for drive sizing and bus voltage margin. ## Feedback — 23-bit optic multi-turn encoder The optic multi-turn encoder provides 23 bits per revolution — 8,388,608 counts per turn — plus multi-turn absolute position tracking over multiple shaft revolutions. This resolution suits high-accuracy positioning applications like rotary indexing tables or gantry axes where sub-arcminute repeatability is required.","metaTitle":"Schneider Electric BEH18MR2913CA6C Servo Motor, 2.9 kW","metaDescription":"Schneider Electric BEH18MR2913CA6C Lexium 18 servo motor, 2.9 kW, 18.46 Nm nominal torque, 1500 rpm, IP67, 23-bit optic encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"226.5 mm","Range":"Lexium 18","Width":"172.5 mm","title":"BEH18MR2913CA6C","Height":"180 mm","Length":"172.5 mm","Key width":"10.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 2.9kW, 220V, M180, 23bit, OPT MT","Encoder type":"Optic encoder","Second shaft":"Without second shaft end","Shaft length":"79.0 mm","Feedback type":"23 bits optic multi turn encoder","Holding brake":"Without","Nominal speed":"1500 rpm, 220 V, single phase","Rotor inertia":"46.19 kg.cm²","Nominal torque":"18.46 N.m, 220 V, single phase","Product weight":"14.3 kg","Shaft diameter":"35.0 mm","Torque constant":"0.982 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"2900 W","Mounting support":"Asian standard flange","Back emf constant":"63.98 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"180 mm","Peak stall torque":"55.38 N.m, 220 V, single phase","Maximum current Irms":"56 A at 2.9 kW, 220 V","Nominal output power":"2900 W, 220 V, single phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"490 N","Continuous stall torque":"18.46 N.m, 220 V, single phase","IP degree of protection":"IP67","Maximum radial force Fr":"1470 N","Continuous stall current":"18.8 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"3","Number of mounting holes":"4","Maximum permanent current":"56 A","Product or component type":"Servo motor","Speed feedback resolution":"8388608 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"13.5 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/17e45f049062a809fef299ef386c7c34.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MR2913CA6C/servo-motor-beh18-lexium-18-2-9kw-220v-m180-23bit-opt-mt/"},"ai":{"faq":[{"question":"How do I get pricing and availability for BEH18MR2913CA6C?","answer":"Submit an RFQ with your target quantity and delivery window."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MR2913CA6C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MR2913CA6C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}