{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MR2913CA6D","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MR2913CA6D","canonicalUrl":"https://aoctrl.com/schneider/BEH18MR2913CA6D","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MR2913CA6D","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18MR2913CA6D Lexium 18 servo motor, 2.9 kW, 1500 rpm, 18.46 Nm nominal torque, 23-bit optic multi-turn encoder, IP67, Asian standard flange.","salesMarkdown":"## 2.9 kW at 1500 rpm — what the torque curve means for your axis The BEH18MR2913CA6D delivers 18.46 Nm nominal torque at 1500 rpm, with a peak stall torque of 55.38 Nm — that is a 3:1 peak-to-continuous ratio, typical for a servo that needs to accelerate a load quickly then hold position without overshooting. The 23-bit optic multi-turn encoder gives 8,388,608 counts per revolution — enough resolution for sub-arcminute positioning on a rotary table or a direct-drive axis without gear multiplication. ## IP67 and the Asian standard flange — mounting constraints IP67 rating means the motor body and the connector interface survive washdown — the seal is at the housing, not the shaft lip, so keep the shaft extension dry if the environment is wet. Shaft is 35 mm diameter with a parallel key, 79 mm shaft length — no second shaft end, so no encoder-on-tail option without a separate shaft adapter. ## Active production — sourcing posture No official successor or cross-reference exists in the Lexium 18 family; this is the standard part for the 2.9 kW, 1500 rpm, 18.46 Nm duty point.","metaTitle":"Schneider Electric BEH18MR2913CA6D Servo Motor, 2.9 kW","metaDescription":"Schneider Electric BEH18MR2913CA6D Lexium 18 servo motor, 2.9 kW, 1500 rpm, 18.46 Nm, IP67, 23-bit optic encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"226.5 mm","Range":"Lexium 18","Width":"172.5 mm","title":"BEH18MR2913CA6D","Height":"180 mm","Length":"172.5 mm","Key width":"10.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 2.9kW, 380V, M180, 23bit, OPT MT","Encoder type":"Optic encoder","Second shaft":"Without second shaft end","Shaft length":"79.0 mm","Feedback type":"23 bits optic multi turn encoder","Holding brake":"Without","Nominal speed":"1500 rpm, 380 V, three phase","Rotor inertia":"46.19 kg.cm²","Nominal torque":"18.46 N.m, 380 V, three phase","Product weight":"14.3 kg","Shaft diameter":"35.0 mm","Torque constant":"1.8 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"2900 W","Mounting support":"Asian standard flange","Back emf constant":"118.69 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"180 mm","Peak stall torque":"55.38 N.m, 380 V, three phase","Maximum current Irms":"30.78 A at 2.9 kW, 380 V","Nominal output power":"2900 W, 380 V, three phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"490 N","Continuous stall torque":"18.46 N.m, 380 V, three phase","IP degree of protection":"IP67","Maximum radial force Fr":"1470 N","Continuous stall current":"10.26 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"3","Number of mounting holes":"4","Maximum permanent current":"30.78 A","Product or component type":"Servo motor","Speed feedback resolution":"8388608 points/turn","[Us] rated supply voltage":"380 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"13.5 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/48dd89e56abe23cc24a20db396088fc1.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MR2913CA6D/servo-motor-beh18-lexium-18-2-9kw-380v-m180-23bit-opt-mt/"},"ai":{"faq":[{"question":"What is the peak torque of the BEH18MR2913CA6D?","answer":"Peak stall torque is 55.38 Nm at 380 V, three-phase — that is the limit for acceleration and deceleration before the drive trips on overcurrent."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MR2913CA6D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MR2913CA6D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}