{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MR2913MA6C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MR2913MA6C","canonicalUrl":"https://aoctrl.com/schneider/BEH18MR2913MA6C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MR2913MA6C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18MR2913MA6C Lexium 18 servo motor, 2900 W nominal output, 18.46 Nm continuous stall torque, 17-bit magnetic multi-turn encoder, IP67, 180 mm flange.","salesMarkdown":"## Torque and motion profile The BEH18MR2913MA6C: 18.46 N.m continuous stall torque at 220 V, with a peak stall torque of 55.38 N.m at 220 V — the 3:1 peak-to-continuous ratio handles short-duration acceleration events without oversizing the frame. Torque constant of 0.982 N.m/A at 40 °C means the drive's current loop directly maps to delivered torque — a 10 A command produces 9.82 N.m at the shaft, minus friction losses. ## Encoder and feedback resolution 17-bit magnetic multi-turn encoder gives 131,072 points per turn — enough resolution for sub-arcminute positioning in rotary indexing or ball-screw linear stages. No second shaft end; the encoder is integrated into the rear housing, so there is no provision for a manual handwheel or external encoder mounting. ## Environmental sealing and integration IP67 rating means the motor body and shaft seal withstand washdown — suitable for food-and-bev lines or outdoor conveyor sections where hose-down cleaning is routine. Asian standard flange, 180 mm flange size, four mounting holes. Depth is 226.5 mm; the overall envelope (172.5 mm wide × 180 mm tall) fits a standard NEMA 180 frame footprint. Air-cooled; no external blower or coolant connections needed. The 10-pole design keeps the magnetic circuit compact enough for natural convection in most enclosures. ## Electrical and mechanical limits Maximum mechanical speed is 3000 rpm — the nominal speed of 1500 rpm at 220 V leaves headroom for field weakening up to the 3000 rpm ceiling, depending on the drive's DC bus voltage. Maximum radial force Fr of 1470 N and axial force Fa of 490 N define the bearing load limits — check belt tension or direct-coupling overhung loads against these figures to avoid premature bearing failure. Continuous stall current is 18.8 A; maximum permanent current is 56 A at 2.9 kW, 220 V. The drive must be sized for the 56 A peak to support the 55.38 N.m peak torque transient.","metaTitle":"Schneider Electric BEH18MR2913MA6C Lexium 18 Servo Motor","metaDescription":"Schneider Electric BEH18MR2913MA6C Lexium 18 servo motor, 2900 W, 18.46 Nm nominal torque, 17-bit multi-turn encoder, IP67.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"226.5 mm","Range":"Lexium 18","Width":"172.5 mm","title":"BEH18MR2913MA6C","Height":"180 mm","Length":"172.5 mm","Key width":"10.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 2.9kW, 220V, M180, 17bit, MAG MT","Encoder type":"Magnetic encoder","Second shaft":"Without second shaft end","Shaft length":"79.0 mm","Feedback type":"17 bits magnetic multi turn encoder","Holding brake":"Without","Nominal speed":"1500 rpm, 220 V, single phase","Rotor inertia":"46.19 kg.cm²","Nominal torque":"18.46 N.m, 220 V","Shaft diameter":"35.0 mm","Torque constant":"0.982 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"2900 W","Mounting support":"Asian standard flange","Back emf constant":"63.98 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"180 mm","Peak stall torque":"55.38 N.m, 220 V","Maximum current Irms":"56 A at 2.9 kW, 220 V","Nominal output power":"2900 W, 220 V","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"490 N","Continuous stall torque":"18.46 N.m, 220 V","IP degree of protection":"IP67","Maximum radial force Fr":"1470 N","Continuous stall current":"18.8 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"3","Number of mounting holes":"4","Maximum permanent current":"56 A","Product or component type":"Servo motor","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"13.5 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/5fc3df9e847262753911bc0500a257f9.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MR2913MA6C/servo-motor-beh18-lexium-18-2-9kw-220v-m180-17bit-mag-mt/"},"ai":{"faq":[{"question":"What is the BEH18MR2913MA6C's continuous torque rating?","answer":"18.46 N.m continuous stall torque at 220 V, with a peak stall torque of 55.38 N.m at 220 V."},{"question":"Does the BEH18MR2913MA6C include a holding brake?","answer":"No — the holding brake is not fitted on this variant. If a brake is required for vertical-axis holding, order the brake-equipped version from the Lexium 18 family."},{"question":"What feedback type does this servo motor use?","answer":"17-bit magnetic multi-turn encoder with 131,072 points per turn resolution — absolute position is retained over multiple shaft revolutions without a battery backup."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MR2913MA6C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MR2913MA6C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}