{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MR4413CA6D","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MR4413CA6D","canonicalUrl":"https://aoctrl.com/schneider/BEH18MR4413CA6D","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MR4413CA6D","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium 18 BEH18MR4413CA6D servo motor, 4.4 kW continuous power, 28.4 N.m nominal torque at 380 V, 23-bit optic multi-turn encoder, IP67, Asian standard flange, without holding brake.","salesMarkdown":"## 4.4 kW, 28.4 N.m — load-matching and torque delivery The BEH18MR4413CA6D is a Lexium 18 servo motor from Schneider Electric, delivering 4.4 kW continuous output power at 380 V three-phase supply. Its nominal torque of 28.4 N.m at 1500 rpm sets the continuous-duty load point for sizing the driven axis — a conveyor, spindle, or rotary table that stays within this torque-speed envelope runs without thermal overload. Peak stall torque reaches 71 N.m at 380 V, giving headroom for acceleration transients or short-duration overloads. The 23-bit optic multi-turn encoder provides absolute position feedback, so the drive knows the rotor angle at power-up without a homing cycle — useful on machines where lost-position recovery time matters. ## IP67 enclosure and Asian standard flange — integration constraints Rated IP67, the motor body and connector interface withstand washdown environments — food-and-beverage lines or outdoor conveyor sections where hose-down cleaning is routine. The Asian standard flange (180 mm square, four mounting holes) matches common machine-frame patterns in Asian-built equipment; verify the bolt pattern against your gearbox or mounting plate before committing the BOM line. No holding brake is fitted on this variant (: Without). For vertical-axis applications or any axis that must hold position with power off, an external brake or a motor with an integrated brake is required. The shaft is a parallel key type, 35 mm diameter, 79 mm shaft length — standard for coupling to a gearbox or pulley. ## Current draw, inertia, and drive sizing The torque constant of 1.821 N.m/A at 40 °C lets the drive calculate the torque output from the current feedback — useful for tension control or force-limited moves. Back EMF constant is 125.24 V/krpm at 40 °C, which sets the voltage the motor generates when spun above rated speed; the drive's DC bus must stay above this back-EMF voltage to maintain current control at high rpm.","metaTitle":"Schneider Electric BEH18MR4413CA6D Servo Motor, 4.4 kW","metaDescription":"Schneider Electric BEH18MR4413CA6D Lexium 18 servo motor, 4.4 kW continuous power, 28.4 N.m nominal torque at 380 V, 23-bit optic multi-turn encoder, IP67.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"226.5 mm","Range":"Lexium 18","Width":"196 mm","title":"BEH18MR4413CA6D","Height":"180 mm","Length":"196 mm","Key width":"10.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 4.4kW, 380V, M180, 23bit, OPT MT","Encoder type":"Optic encoder","Second shaft":"Without second shaft end","Shaft length":"79.0 mm","Feedback type":"23 bits optic multi turn encoder","Holding brake":"Without","Nominal speed":"1500 rpm, 380 V, three phase","Rotor inertia":"67.22 kg.cm²","Nominal torque":"28.4 N.m, 380 V, three phase","Product weight":"18.7 kg","Shaft diameter":"35.0 mm","Torque constant":"1.821 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"4400 W","Mounting support":"Asian standard flange","Back emf constant":"125.24 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"180 mm","Peak stall torque":"71 N.m, 380 V, three phase","Stator resistance":"0.391 Ohm","Maximum current Irms":"37.8 A at 4.4 kW, 380 V","Nominal output power":"4400 W, 380 V, three phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"490 N","Continuous stall torque":"28.4 N.m, 380 V, three phase","IP degree of protection":"IP67","Maximum radial force Fr":"1470 N","Continuous stall current":"15.6 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"Three phase","Number of mounting holes":"4","Output current 3s peak 2":"37.8 A","Maximum permanent current":"37.8 A","Product or component type":"Servo motor","Speed feedback resolution":"8388608 points/turn","[Us] rated supply voltage":"380 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"13.5 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/eacbbc29a3ab33fe45940a104a76f498.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MR4413CA6D/servo-motor-beh18-lexium-18-4-4kw-380v-m180-23bit-opt-mt/"},"ai":{"faq":[{"question":"What is the nominal torque and power of BEH18MR4413CA6D?","answer":"Nominal torque is 28.4 N.m at 1500 rpm, 380 V three-phase; continuous output power is 4.4 kW. Peak stall torque is 71 N.m for transient overloads."},{"question":"Does BEH18MR4413CA6D include a holding brake?","answer":"No — the holding brake field is marked 'Without'. For vertical-axis or power-off hold applications, an external brake or a motor variant with an integrated brake is needed."},{"question":"What is the IP rating and flange type?","answer":"IP67 rated for washdown environments. The flange is an Asian standard 180 mm square with four mounting holes — verify compatibility with your gearbox or machine frame."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MR4413CA6D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MR4413CA6D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}