{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MR4413MA6D","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MR4413MA6D","canonicalUrl":"https://aoctrl.com/schneider/BEH18MR4413MA6D","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MR4413MA6D","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18MR4413MA6D, Lexium 18 servo motor, 4.4 kW, 28.4 Nm nominal torque at 1500 rpm, 380 V three-phase, IP67, 17-bit magnetic multi-turn encoder, no holding brake, 18.7 kg.","salesMarkdown":"## Torque and speed envelope for the application The BEH18MR4413MA6D: Rated 4.4 kW continuous output power at 1500 rpm nominal speed on 380 V three-phase supply, delivering 28.4 Nm nominal torque and 71 Nm peak stall torque — this is the torque ceiling for acceleration and overload events before the drive must current-limit. Maximum mechanical speed is 3000 rpm, so the motor can be run at double nominal speed if the load torque drops accordingly — confirm the drive's output frequency ceiling supports the higher speed before commissioning. ## Feedback and environmental sealing Equipped with a 17-bit magnetic multi-turn encoder — absolute position feedback that retains the multi-turn count without a battery, simplifying homing sequences on power-up. IP67-rated housing means the motor body and connector interface withstand washdown and dust ingress without an additional enclosure — suitable for food-and-beverage or wet machining lines where hose-down cleaning is routine. Air-cooled with no holding brake — the load must hold position through the mechanical system (leadscrew self-lock, external brake, or counterbalance) when the drive is disabled. ## Mounting and mechanical interface Asian standard flange with 180 mm flange size, four mounting holes, and a 35 mm shaft with parallel key — the shaft length is 79 mm and the key width is 10 mm, matching standard coupling and pulley bore dimensions for this frame class. Rated for 1470 N maximum radial force and 490 N maximum axial force — these are the bearing load limits at the shaft centreline; overshooting them shortens bearing life or causes shaft deflection that misaligns the encoder. Electrical connection via two male/female connectors — no second shaft end, so the motor is intended for single-ended load coupling only.","metaTitle":"Schneider Electric BEH18MR4413MA6D Servo Motor, 4.4 kW","metaDescription":"Schneider Electric BEH18MR4413MA6D Lexium 18 servo motor, 4.4 kW, 28.4 Nm nominal torque at 1500 rpm, IP67, 17-bit magnetic multi-turn encoder, no brake.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"226.5 mm","Range":"Lexium 18","Width":"196 mm","title":"BEH18MR4413MA6D","Height":"180 mm","Length":"196 mm","Key width":"10.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 4.4kW, 380V, M180, 17bit, MAG MT","Encoder type":"Magnetic encoder","Second shaft":"Without second shaft end","Shaft length":"79.0 mm","Feedback type":"17 bits magnetic multi turn encoder","Holding brake":"Without","Nominal speed":"1500 rpm, 380 V, three phase","Rotor inertia":"67.22 kg.cm²","Nominal torque":"28.4 N.m, 380 V, three phase","Product weight":"18.7 kg","Shaft diameter":"35.0 mm","Torque constant":"1.821 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"4400 W","Mounting support":"Asian standard flange","Back emf constant":"125.24 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"180 mm","Peak stall torque":"71 N.m, 380 V, three phase","Stator resistance":"0.391 Ohm","Maximum current Irms":"37.8 A at 4.4 kW, 380 V","Nominal output power":"4400 W, 380 V, three phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"490 N","Continuous stall torque":"28.4 N.m, 380 V, three phase","IP degree of protection":"IP67","Maximum radial force Fr":"1470 N","Continuous stall current":"15.6 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"Three phase","Number of mounting holes":"4","Output current 3s peak 2":"37.8 A","Maximum permanent current":"37.8 A","Product or component type":"Servo motor","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"380 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"13.5 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c52c424a22a58bb3772b8ab5dec97e6b.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18MR4413MA6D/servo-motor-beh18-lexium-18-4-4kw-380v-m180-17bit-mag-mt/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MR4413MA6D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MR4413MA6D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}