{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MR5513CF6D","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MR5513CF6D","canonicalUrl":"https://aoctrl.com/schneider/BEH18MR5513CF6D","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MR5513CF6D","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium 18 BEH18 servo motor with brake, 5500 W continuous output, 35 N.m nominal torque, 380 V three-phase, 180 mm flange, IP67, optic multi-turn encoder.","salesMarkdown":"## Where this motor drops on the line The BEH18MR5513CF6D: The Lexium 18 BEH18 servo motor with brake sits in the mid-power slot of the Schneider servo range, sized for machine axes that need a holding brake for vertical or suspended loads. Continuous output is 5500 W at 380 V three-phase, with a nominal torque of 35 N.m at 1500 rpm and a peak stall torque of 87.5 N.m at 380 V — so the motor can accelerate well above its continuous rating for short index moves before falling back to the continuous figure. An Asian-standard 180 mm flange with four mounting holes lets it bolt into the common machine footprint used across Asian-built packaging, converting, and material-handling skids. The IP67 rating on the housing means the motor body and connector face tolerate washdown and dust exposure typical of food, beverage, and outdoor cell builds — but the cable gland and mated connector are the real wet-end seal, not the housing alone. ## Torque, speed, and the brake that holds the load Continuous stall torque is 35 N.m at 380 V three-phase, with a continuous stall current of 19.77 A — these are the figures that govern the constant-load region of the torque/speed curve, not the headline 5500 W. Maximum mechanical speed is 3000 rpm, so any application running the motor above that requires a different model from the family. Holding torque from the integrated brake is 50 N.m, which is what keeps a vertical axis from drifting when the drive disables output. ## Feedback and electrical constants Position feedback is a 23-bit optical multi-turn encoder, so the drive gets absolute multi-turn position back from the motor — no homing cycle after a power loss, and no battery-backed encoder add-on. The torque constant of 1.77 N.m/A at 40 °C and back-EMF constant of 121.39 V/krpm at 40 °C let the integrator pre-compute the current command for a given torque demand and the no-load speed ceiling at a given bus voltage. Stator resistance is 0.191 Ohm — small, which means copper losses are modest at the continuous rating. The motor is air-cooled and ten-pole, with parallel-key shaft end (12.0 mm key width on a 42.0 mm shaft, 113.0 mm shaft length) and no second shaft end. Two male/female connectors carry power and feedback separately, matching the Lexium 18 drive-side cabling — confirm the drive generation in the panel before pulling a spare, since the connector keying has changed across Lexium revisions.","metaTitle":"Schneider Electric BEH18MR5513CF6D Servo Motor, 5.5 kW","metaDescription":"Schneider Electric BEH18MR5513CF6D Lexium 18 servo motor with brake, 5500 W continuous at 380 V three-phase, 35 N.m nominal / 50 N.m holding.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"226.5 mm","Range":"Lexium 18","Width":"287.5 mm","title":"BEH18MR5513CF6D","Height":"180 mm","Length":"287.5 mm","Key width":"12.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 5.5kW, 380V, M180, 23bit, OPT MT,brake","Encoder type":"Optic encoder","Second shaft":"Without second shaft end","Shaft length":"113.0 mm","Feedback type":"23 bits optic multi turn encoder","Holding brake":"With","Nominal speed":"1500 rpm, 380 V, three phase","Rotor inertia":"116.28 kg.cm²","Holding torque":"50 N.m","Nominal torque":"35 N.m, 380 V, three phase","Product weight":"25.9 kg","Shaft diameter":"42.0 mm","Torque constant":"1.77 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"5500 W","Mounting support":"Asian standard flange","Back emf constant":"121.39 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"180 mm","Peak stall torque":"87.5 N.m, 380 V, three phase","Stator resistance":"0.191 Ohm","Maximum current Irms":"45.08 A at 5.5 kW, 380 V","Nominal output power":"5500 W, 380 V, three phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"588 N","Continuous stall torque":"35 N.m, 380 V, three phase","IP degree of protection":"IP67","Maximum radial force Fr":"1764 N","Continuous stall current":"19.77 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"Three phase","Number of mounting holes":"4","Maximum permanent current":"45.08 A","Product or component type":"Servo motor","Speed feedback resolution":"8388608 points/turn","[Us] rated supply voltage":"380 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"13.5 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/th/en/product/download-pdf/BEH18MR5513CF6D?filename=Schneider+Electric_Easy-Lexium-18_BEH18MR5513CF6D.pdf', 'path_name': '150956ebb43a112545cc3fc9fe3cc55c.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/150956ebb43a112545cc3fc9fe3cc55c.pdf', 'status': 1}","sourceUrl":"https://www.se.com/th/en/product/BEH18MR5513CF6D/servo-motor-beh18-lexium-18-5-5kw-380v-m180-23bit-opt-mtbrake/"},"ai":{"faq":[{"question":"What is the listed depth of BEH18MR5513CF6D?","answer":"Depth is 226.5 mm on the Schneider Electric BEH18MR5513CF6D data sheet, with overall length 287.5 mm and height 180 mm — the flange face to rear-cap distance is the 226.5 mm figure that drives the cabinet depth allowance when the motor mounts through a wall plate."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MR5513CF6D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MR5513CF6D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}