{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MR5513MA6D","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MR5513MA6D","canonicalUrl":"https://aoctrl.com/schneider/BEH18MR5513MA6D","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MR5513MA6D","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18MR5513MA6D, Lexium 18 series AC servo motor, 5500 W at 380 V three-phase, 35 N.m nominal torque, IP67, Asian standard flange.","salesMarkdown":"## 5.5 kW continuous at 380 V — what that rating actually buys BEH18MR5513MA6D sits in the Lexium 18 line (short name BEH18) and delivers 5500 W of continuous output power at 380 V three-phase, paired with a 35 N.m nominal torque at the same voltage — the continuous and nominal torque figures are identical here, meaning the motor is rated to hold 35 N.m indefinitely without slipping into thermal derating. That continuous rating matters more than the headline 5.5 kW for sizing: peak stall torque reaches 87.5 N.m at 380 V three-phase, with a maximum Irms of 45.08 A — so the drive must be sized to deliver peak current during accel/decel, while thermal design follows the 19.77 A continuous stall current. ## Mechanical envelope — flange, shaft, and load limits The motor mounts on an Asian standard flange (180 mm flange size) with four mounting holes, a parallel-key shaft with 12.0 mm key width and 113.0 mm shaft length, 42.0 mm shaft diameter — a heavy-duty output suited to packaging, converting and machine-tool spindles rather than tabletop automation. Mechanical ceiling is 3000.0 rpm, with maximum radial force Fr of 1764 N and maximum axial force Fa of 588 N — bearing-life calculations need to use these, not the electrical rating, when the coupling and pulley stack up against the shaft. ## Feedback, cooling, and the IP67 rating Feedback is a 17-bit magnetic multi-turn encoder — magnetic rather than optical, which is the typical Lexium 18 choice for harsh environments where dust, vibration and oil mist would shorten an optical disk's life. The motor is air-cooled (no water jacket), sealed to IP67, and wired through two connectors male/female — the IP67 figure means the body holds up to temporary immersion, which puts it in scope for food-and-bev washdown lines and outdoor skids, not just panel-room service. No holding brake is fitted; no second shaft end is provided. ## Electrical constants for the drive commissioning sheet Torque constant is 1.77 N.m/A at 40 °C, back-EMF constant 121.39 V/krpm at 40 °C, stator resistance 0.191 Ohm — drive auto-tune can read the nameplate and back-calculate, but the 40 °C reference matters: cold values look better than hot operating values, and the controller should bias the current loop toward the hot figure during thermal soak. ## Lifecycle and sourcing posture Lifecycle stage is recorded as current in the product record — no official end-of-life notice or successor order code on file from the manufacturer. As an independent distributor, the supply channel is quoted-to-order against the BOM from independent distribution; lead time, lot size and traceability documents are confirmed at RFQ.","metaTitle":"Schneider BEH18MR5513MA6D Lexium 18 servo, 5.5 kW","metaDescription":"Schneider BEH18MR5513MA6D Lexium 18 AC servo motor, 5500 W, 35 N.m, IP67, 17-bit magnetic encoder. Quoted to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"226.5 mm","Range":"Lexium 18","Width":"242.5 mm","title":"BEH18MR5513MA6D","Height":"180 mm","Length":"242.5 mm","Key width":"12.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 5.5kW, 380V, M180, 17bit, MAG MT","Encoder type":"Magnetic encoder","Second shaft":"Without second shaft end","Shaft length":"113.0 mm","Feedback type":"17 bits magnetic multi turn encoder","Holding brake":"Without","Nominal speed":"1500 rpm, 380 V, three phase","Rotor inertia":"110.53 kg.cm²","Nominal torque":"35 N.m, 380 V, three phase","Product weight":"19.5 kg","Shaft diameter":"42.0 mm","Torque constant":"1.77 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"5500 W","Mounting support":"Asian standard flange","Back emf constant":"121.39 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"180 mm","Peak stall torque":"87.5 N.m, 380 V, three phase","Stator resistance":"0.191 Ohm","Maximum current Irms":"45.08 A at 5.5 kW, 380 V at 4.4 kW","Nominal output power":"5500 W, 380 V, three phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"588 N","Continuous stall torque":"35 N.m, 380 V, three phase","IP degree of protection":"IP67","Maximum radial force Fr":"1764 N","Continuous stall current":"19.77 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"Three phase","Number of mounting holes":"4","Maximum permanent current":"45.08 A","Product or component type":"Servo motor","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"380 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"13.5 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/th/en/product/download-pdf/BEH18MR5513MA6D?filename=Schneider+Electric_Easy-Lexium-18_BEH18MR5513MA6D.pdf', 'path_name': 'c1106d0a7bb7734546ee3e27fc010613.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/c1106d0a7bb7734546ee3e27fc010613.pdf', 'status': 1}","sourceUrl":"https://www.se.com/th/en/product/BEH18MR5513MA6D/servo-motor-beh18-lexium-18-5-5kw-380v-m180-17bit-mag-mt/"},"ai":{"faq":[{"question":"What does the 5.5 kW / 35 N.m rating mean for selecting the drive?","answer":"The motor delivers 5500 W continuous at 380 V three-phase and holds 35 N.m of torque continuously without thermal derating — size the drive for the 45.08 A peak Irms, not the 5.5 kW headline, and confirm the controller's continuous current rating exceeds the 19.77 A continuous stall current."},{"question":"Can BEH18MR5513MA6D be used in washdown environments?","answer":"Yes — the IP67 sealing rating covers temporary immersion, and the air-cooled magnetic-encoder design has no optical disk or fan inlet that would normally fail in wet or oily atmospheres. For full high-pressure washdown, confirm the mating connector seals on the two connector pair."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MR5513MA6D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MR5513MA6D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}