{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18MR5513MF6D","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18MR5513MF6D","canonicalUrl":"https://aoctrl.com/schneider/BEH18MR5513MF6D","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18MR5513MF6D","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium 18 series BEH18MR5513MF6D AC servo motor with holding brake, 5500 W continuous, 50 N.m holding torque, 180 mm Asian standard flange, IP67.","salesMarkdown":"## Form factor: what lands in the panel The BEH18MR5513MF6D: An IP67 rating on the motor body means the housing tolerates temporary immersion and washdown — practical for food-and-beverment lines, machine-tool cells with coolant splash, or any deployment where the driven mechanism sits below the panel enclosure rather than inside it. ## Headline ratings: 5.5 kW at 380 V three-phase Continuous output power is 5500 W at 380 V three-phase, with a nominal torque of 35 N.m and a nominal speed of 1500 rpm under the same voltage. Continuous stall torque holds at 35 N.m drawing 19.77 A; peak stall torque reaches 87.5 N.m at 380 V — meaning the drive can deliver roughly 2.5× the rated torque for short acceleration ramps before tripping the drive current limit. The electrical signature sets the drive commissioning baseline: a torque constant of 1.77 N.m/A at 40 °C, back-EMF constant of 121.39 V/krpm at 40 °C, and stator resistance of 0.191 Ω. Maximum mechanical speed is rated 3000 rpm, and maximum RMS current reaches 45.08 A at 5.5 kW, 380 V — the sizing number for the upstream drive and cabling rather than the continuous-duty number. ## Feedback, poles, and the holding brake The motor carries an integrated holding brake rated 50 N.m — well above the 35 N.m continuous torque, so the brake holds the load stationary with margin after the drive enable is removed. Power connection is via a two-connector male/female pair, which on this family is the standard pre-wired feedback + power harness interface rather than a terminal box. ## Mechanical envelope: radial, axial, and the gearbox side Maximum radial load on the shaft is 1764 N and maximum axial load 588 N — the figures that decide whether the motor drives its load directly through a coupling, or through a right-angle gearbox that absorbs the overhung load. Cooling is air-cooled with no second shaft end, so the layout has a clean cable exit on one face and a single drive-end output.","metaTitle":"Schneider Electric BEH18MR5513MF6D Lexium 18 Servo Motor","metaDescription":"Schneider Electric BEH18MR5513MF6D Lexium 18 servo motor with brake, 5.5 kW at 380 V three-phase, 50 N.m holding torque, IP67.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"226.5 mm","Range":"Lexium 18","Width":"287.5 mm","title":"BEH18MR5513MF6D","Height":"180 mm","Length":"287.5 mm","Key width":"12.0 mm","Shaft end":"Parallel key","description":"Servo motor BEH18, Lexium 18, 5.5kW, 380V, M180, 17bit, MAG MT, brake","Encoder type":"Magnetic encoder","Second shaft":"Without second shaft end","Shaft length":"113.0 mm","Feedback type":"17 bits magnetic multi turn encoder","Holding brake":"With","Nominal speed":"1500 rpm, 380 V, three phase","Rotor inertia":"116.28 kg.cm²","Holding torque":"50 N.m","Nominal torque":"35 N.m, 380 V, three phase","Product weight":"25.9 kg","Shaft diameter":"42.0 mm","Torque constant":"1.77 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"5500 W","Mounting support":"Asian standard flange","Back emf constant":"121.39 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"180 mm","Peak stall torque":"87.5 N.m, 380 V, three phase","Stator resistance":"0.191 Ohm","Maximum current Irms":"45.08 A at 5.5 kW, 380 V","Nominal output power":"5500 W, 380 V, three phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"588 N","Continuous stall torque":"35 N.m, 380 V, three phase","IP degree of protection":"IP67","Maximum radial force Fr":"1764 N","Continuous stall current":"19.77 A","Maximum mechanical speed":"3000.0 rpm","Network number of phases":"Three phase","Number of mounting holes":"4","Maximum permanent current":"45.08 A","Product or component type":"Servo motor","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"380 V","Ambient air temperature for operation":"0...40 °C","Circle diameter of the mounting holes":"13.5 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/th/en/product/download-pdf/BEH18MR5513MF6D?filename=Schneider+Electric_Easy-Lexium-18_BEH18MR5513MF6D.pdf', 'path_name': '95b5c83587110f3ab53acbb0f74a1632.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/95b5c83587110f3ab53acbb0f74a1632.pdf', 'status': 1}","sourceUrl":"https://www.se.com/th/en/product/BEH18MR5513MF6D/servo-motor-beh18-lexium-18-5-5kw-380v-m180-17bit-mag-mt-brake/"},"ai":{"faq":[{"question":"What is BEH18MR5513MF6D's listed depth on this servo motor line?","answer":"Depth is 226.5 mm. The overall envelope is 287.5 mm long × 287.5 mm wide × 226.5 mm deep, on a 180 mm flange — size it against the cabinet cutout before commit."},{"question":"What is the BEH18MR5513MF6D's listed range on this servo motor line?","answer":"The range is Lexium 18, with the device short name BEH18. It is a 5500 W three-phase servo with integrated holding brake and 17-bit magnetic multi-turn encoder."},{"question":"Who supplies BEH18MR5513MF6D and how is it quoted for volume purchases?","answer":"Independent industrial-automation distribution sources this code to order against the BOM — volume pricing and current availability confirmed at RFQ. Quoted-to-order posture, not stock-on-shelf."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18MR5513MF6D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18MR5513MF6D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}