{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMECRD0100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMECRD0100","canonicalUrl":"https://aoctrl.com/schneider/BMECRD0100","factsUrl":"https://aoctrl.com/api/mcp/products/BMECRD0100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric EcoStruxure Automation Expert Modicon X80 Ethernet RIO drop adaptor, double module, 24 V DC, 295 mA, 10/100 Mbit/s.","salesMarkdown":"The Schneider BMECRD0100 is the Ethernet RIO drop adaptor for a Modicon X80 remote rack in an EcoStruxure Automation Expert distributed PAC system. It handles ring-topology communications at 10/100 Mbit/s over two Ethernet ports — one for the main network, one for the RIO ring (RSTP). Powers off 24 V DC and draws 295 mA from the backplane. Occupies a double slot — 64 mm wide, 131 mm deep and tall — so plan for that width in the rack layout. IP20 rating suits a clean indoor cabinet. Rack-mounted, secured by screws. Requires SoftdPAC firmware installed on the host PAC. Local signalling includes RUN, I/O error, module status, network status, download-in-progress, and cybersecurity LEDs — useful for commissioning and fault finding. Supports EtherNet/IP adapter mode, RSTP ring, QoS, DHCP, TFTP, FTP, FDR, and NTP clients. Functionally, collects input data and publishes it to the remote I/O head adaptor, updates output modules, and provides system time stamping for the I/O extension rack. Operates in standard environment from 0 to 60 °C ambient, with storage range -40 to 85 °C.","metaTitle":"Schneider BMECRD0100 X80 Ethernet RIO Adaptor, 24 V DC","metaDescription":"Active BMECRD0100 X80 RIO drop adaptor for Modicon dPAC, 24 V DC, 295 mA, double module. Complies with UL, CSA, IEC. Sourced to order; RFQ for current status.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Depth":"5.2 in (131 mm)","Width":"2.5 in (64 mm)","Height":"5.2 in (131 mm)","Marking":"CE","Bus type":"Bus X across the remote backplane Ethernet across the remote backplane","Category":"US1PC1522555","Topology":"Ring","Standards":"EN/IEC 61131-2 EN/IEC 61010-2-201 UL 61010-2-201 CSA C22.2 No 61010-2-201 IACS E10 EN/IEC 61000-6-5, interface type 1 and type 2 EN/IEC 61850-3, location G UL 121201 CSA C22.2 No 213","Directives":"2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility","Fixing Mode":"By screws","Cybersecurity":"Firmware signature","Exchange mode":"Half duplex, full duplex, autonegotiation, auto MDIX","Input voltage":"24 V DC","Module format":"Double","Mounting Mode":"Rack-mounted","Port Ethernet":"10/100BASE-TX","lifecycle_stage":"current","Condition of use":"SoftdPAC required","Local signalling":"1 LED (green) for module active (RUN) 1 LED (red) for I/O error (I/O) 1 LED (green/red) for module status (Mod Status) 1 LED (green/red) for network communication status (Net Status) 1 LED (green) for download in progress (DL) 1 LED (green/red) for cyber security (SEC)","Range of Product":"EcoStruxure Automation Expert","Relative Humidity":"5...95 % without condensation","Transmission Rate":"10/100 Mbit/s","Device Application":"X80 Ethernet RIO drop adaptor","Function Available":"Input data is collected and published to the remote I/O head adaptor Output modules are updated with the data received from remote I/O head adaptor System time stamping I/O extension rack","Operating altitude":"0...6561.68 ft (0...2000 m)","Current Consumption":"295 mA","Communication Service":"Ethernet/IP adapter RSTP (Ring topology support) Ethernet RIO network Quality of Service (QoS) DHCP client TFTP client FTP client FDR client NTP client","Nbr. of units in pkg.":"1","IP Degree of Protection":"IP20","Product or Component Type":"DPAC module","Communication Network Type":"IPv4 (internet protocol) IPv6 (internet protocol)","Integrated connection type":"1 Ethernet TCP/IP service or distributed equipment 2 Ethernet TCP/IP Ethernet RIO Network (RSTP)","Communication Port Protocol":"EtherNet/IP","Environmental characteristic":"Standard environment","Product Specific Application":"For remote I/O modules","Ambient Air Temperature for Storage":"-40...185 °F (-40...85 °C)","Ambient Air Temperature for Operation":"32...140 °F (0...60 °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/52270295ac3659419e78457b3132338d.pdf","sourceUrl":"https://www.se.com/nz/en/product/BMECRD0100/remote-io-ecostruxure-automation-expert-modicon-x80-adapter-for-dpac-ethernet/","alternativesUrl":"https://aoctrl.com/api/mcp/products/BMECRD0100/alternatives.json"},"ai":{"faq":[{"question":"What are the physical dimensions of the BMECRD0100?","answer":"The module is a double slot in the X80 rack: width 64 mm, depth 131 mm, height 131 mm. It is rack-mounted with screws."},{"question":"What compliance documentation is available for the BMECRD0100?","answer":"The adaptor carries CE marking and complies with UL 61010-2-201, CSA C22.2 No 61010-2-201, IEC 61131-2, IEC 61000-6-5, IEC 61850-3, and the low-voltage (2014/35/EU) and EMC (2014/30/EU) directives."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMECRD0100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMECRD0100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}