{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0702P07F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0702P07F","canonicalUrl":"https://aoctrl.com/schneider/BMI0702P07F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0702P07F","rawCanonicalId":null},"summary":{"shortDescription":"BMI0702P07F servo motor, three-phase, 208–480 V, absolute Hiperface multiturn feedback, holding brake, IP65 housing.","salesMarkdown":"The BMI0702P07F is a three-phase servo motor in the BMI series, delivering 400 W nominal output at 208 V three-phase, 800 W at 400 V, and 900 W at 480 V. It carries absolute multiturn SinCos Hiperface feedback and a holding brake with 3 N.m holding torque. The shaft is untapped, 0.4 in (11 mm) diameter by 0.9 in (23 mm) length, and the motor is cooled by natural convection. Mounts via an international standard flange with a 70 mm mating face and four holes of 0.2 in (5.5 mm) diameter on a centring collar depth of 0.10 in (2.5 mm). The electrical connection is via printed circuit board connector — verify the mating connector part number before layout. The IP rating is shaft IP54 / housing IP65, suitable for enclosures with moderate dust and washdown exposure. Shaft support: radial force ratings are provided at various speeds — maximum 710 N at 1000 rpm, decreasing to 390 N at 6000 rpm. Axial force rating is 0.2 x Fr. When integrating, ensure the application load does not exceed these mechanical limits; natural convection cooling also imposes a duty-cycle constraint in high-ambient panels.","metaTitle":"BMI0702P07F Servo Motor, 3-Phase, Hiperface, Brake","metaDescription":"Three-phase BMI0702P07F servo motor with absolute multiturn Hiperface feedback, holding brake (3 N.m), IP65 housing, and nominal output 400–900 W depending on supply voltage. Activ","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Phase":"Three phase","Length":"12.05 in (306 mm)","Category":"US1PC5618287","Shaft end":"Untapped","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"With","Nominal speed":"1800 rpm 208 V three phase 3600 rpm 400 V three phase 4400 rpm 480 V three phase","Rotor inertia":"1.24 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"21.2 lbf.in (2.4 N.m) 208 V three phase 19.5 lbf.in (2.2 N.m) 400 V three phase 17.7 lbf.in (2 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.15 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"77.18 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"60.2 lbf.in (6.8 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 60.2 lbf.in (6.8 N.m) 480 V three phase","Stator inductance":"25.75 mH 68 °F (20 °C)","Stator resistance":"8.89 Ohm 68 °F (20 °C)","Brake pull-in power":"5 W","Maximum current Irms":"9.6 A 208 V, three phase 9.6 A 400 V, three phase 9.6 A 480 V, three phase","Nominal output power":"400 W 208 V three phase 800 W 400 V three phase 900 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"208...480 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Output current 3s peak":"6 A 400 V 3 s","Continuous stall torque":"21.95 lbf.in (2.48 N.m) 208...480 V three phase","IP Degree of Protection":"Shaft IP54 Housing IP65","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"2 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"32768 points/turn x 4096 turns","[Us] rated supply voltage":"208...480 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"2.9 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,620.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3ef5ce39c60629570259145cf22570e6.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0702P07F/alternatives.json"},"ai":{"faq":[{"question":"What phase is the BMI0702P07F designed for?","answer":"It is a three-phase motor. The supply voltage range is 208–480 V three-phase, with nominal output power varying by voltage."},{"question":"What is the physical length of the BMI0702P07F?","answer":"The overall length is 12.05 in (306 mm). This includes the motor body but excludes the shaft projection; the shaft itself is 0.9 in (23 mm) long."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0702P07F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0702P07F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}