{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0702P11A","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0702P11A","canonicalUrl":"https://aoctrl.com/schneider/BMI0702P11A","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0702P11A","rawCanonicalId":null},"summary":{"shortDescription":"Bosch Rexroth BMI0702P11A, three-phase servo motor, 800 W nominal at 400 V, 9.6 A max current, 6.8 N·m peak torque, absolute single-turn SinCos Hiperface feedback, IP65 housing.","salesMarkdown":"## Motor profile and key constraints The BMI0702P11A: Three-phase BMI servo motor for 208-480 V supply; nominal power output depends on the connected voltage: 400 W at 208 V, 800 W at 400 V, and 900 W at 480 V. Absolute single-turn SinCos Hiperface feedback eliminates the need for a homing sequence on each power-up. Integrated EMC filter simplifies panel layout and reduces external filter count. Natural convection cooled – no auxiliary fan required, but thermal performance must be derated if mounted in a confined cavity without airflow. ## Torque and speed behaviour Nominal torque varies with supply voltage: 2.4 N·m at 208 V, 2.2 N·m at 400 V, 2.0 N·m at 480 V. Peak stall torque holds at 6.8 N·m across the entire voltage range – critical for brief acceleration or load transients. Maximum current is 9.6 A at all voltage levels. ## Mechanical integration notes Flange size 70 mm with international standard mounting; centring collar diameter 60 mm, depth 2.5 mm. Keyed shaft of 11 mm diameter and 23 mm length; no second shaft end. Overall length 268 mm. IP65 over the housing, IP54 at the shaft – suitable for installation in damp or wash-down environments but not submersion. Max radial force on the shaft is speed-dependent: 710 N at 1000 rpm, dropping to 390 N at 6000 rpm. Axial force limited to 20 % of the radial rating. Electrical connection is via a printed circuit board connector; no holding brake fitted. For vertical loads or emergency stops, an external brake must be added.","metaTitle":"BMI0702P11A Servo Motor, 800W 400V, 9.6A, 3-phase","metaDescription":"BMI0702P11A servo motor, 3-phase, 800 W at 400 V, 9.6 A max, absolute single-turn Hiperface, IP65 housing. In current production, available to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Phase":"Three phase","Length":"10.6 in (268 mm)","Category":"US1PC5618287","Key width":"0.2 in (4 mm)","Shaft end":"Keyed","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"Without","Nominal speed":"1800 rpm 208 V three phase 3600 rpm 400 V three phase 4400 rpm 480 V three phase","Rotor inertia":"1.13 kg.cm²","Nominal torque":"21.2 lbf.in (2.4 N.m) 208 V three phase 19.5 lbf.in (2.2 N.m) 400 V three phase 17.7 lbf.in (2 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.15 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"77.18 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"60.2 lbf.in (6.8 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 60.2 lbf.in (6.8 N.m) 480 V three phase","Stator inductance":"25.75 mH 68 °F (20 °C)","Stator resistance":"8.89 Ohm 68 °F (20 °C)","Maximum current Irms":"9.6 A 208 V, three phase 9.6 A 400 V, three phase 9.6 A 480 V, three phase","Nominal output power":"400 W 208 V three phase 800 W 400 V three phase 900 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"208...480 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Output current 3s peak":"6 A 400 V 3 s","Continuous stall torque":"21.95 lbf.in (2.48 N.m) 208...480 V three phase","IP Degree of Protection":"Shaft IP54 Housing IP65","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"2 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"208...480 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"2.9 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,285.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3ef5ce39c60629570259145cf22570e6.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0702P11A/alternatives.json"},"ai":{"faq":[{"question":"What is the motor's phase configuration?","answer":"Three-phase."},{"question":"What is the overall length of BMI0702P11A?","answer":"268 mm (10.6 in)."},{"question":"What feedback does this servo motor use?","answer":"Absolute single-turn SinCos Hiperface encoder, which retains position after power loss."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0702P11A","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0702P11A when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}