{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0702P22F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0702P22F","canonicalUrl":"https://aoctrl.com/schneider/BMI0702P22F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0702P22F","rawCanonicalId":null},"summary":{"shortDescription":"schneider BMI0702P22F motors — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.","salesMarkdown":"## Overview The BMI0702P22F is a Schneider BMI-series three-phase servo motor, rated 400 W output with 2.48 Nm torque at 480 V, 60 Hz. It includes an integrated holding brake and an absolute multiturn SinCos Hiperface feedback encoder providing 131072 points per turn over 4096 turns. The motor is rated IP65, uses natural convection cooling, and mounts via an international standard flange. It is compatible with Lexium 32i drive control units (LXM32i CANopen, LXM32i EtherCAT). Versus the BMI0702P26F, the BMI0702P22F carries a higher-resolution absolute multiturn SinCos Hiperface encoder (131072 points/turn x 4096 turns vs 32768 points/turn single-turn). This provides finer position feedback over multiple rotations, suited for applications requiring absolute position retention across a full travel range. Compared to the BMI0702P27A, the BMI0702P22F includes a holding brake (BMI0702P27A does not). Rotor inertia is 1.24 kg.cm²; the brake adds holding torque for vertical-axis loads but increases the reflected inertia the drive must manage during deceleration. ## Selection notes The IP65 rating covers the motor body and encoder connector, permitting washdown exposure in food or beverage environments. Maximum radial force (Fr) derates with speed: 710 N at 1000 rpm, 560 N at 2000 rpm, 490 N at 3000 rpm, 450 N at 4000 rpm, 410 N at 5000 rpm, 390 N at 6000 rpm. Axial force (Fa) is limited to 0.2 x Fr. ## Lifecycle","metaTitle":"Schneider BMI0702P22F Servo Motor, 400 W, 2.48 Nm, IP65, Absolute Multiturn Enco","metaDescription":"Schneider BMI0702P22F servo motor, 400 W rated power, 2.48 Nm torque at 480 V three-phase, IP65, with holding brake and absolute multiturn SinCos Hiperface feedback (131072 points/","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Phase":"Three phase","Length":"12.05 in (306 mm)","Category":"US1PC5618287","Shaft end":"Untapped","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"With","Nominal speed":"1800 rpm 208 V three phase 3600 rpm 400 V three phase 4400 rpm 480 V three phase","Rotor inertia":"1.24 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"21.2 lbf.in (2.4 N.m) 208 V three phase 19.5 lbf.in (2.2 N.m) 400 V three phase 17.7 lbf.in (2 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.15 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"77.18 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"60.2 lbf.in (6.8 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 60.2 lbf.in (6.8 N.m) 480 V three phase","Stator inductance":"25.75 mH 68 °F (20 °C)","Stator resistance":"8.89 Ohm 68 °F (20 °C)","Brake pull-in power":"5 W","Maximum current Irms":"9.6 A 208 V, three phase 9.6 A 400 V, three phase 9.6 A 480 V, three phase","Nominal output power":"400 W 208 V three phase 800 W 400 V three phase 900 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"208...480 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Output current 3s peak":"6 A 400 V 3 s","Continuous stall torque":"21.95 lbf.in (2.48 N.m) 208...480 V three phase","IP Degree of Protection":"IP65","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"2 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"131072 points/turn x 4096 turns","[Us] rated supply voltage":"208...480 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"2.9 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,565.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3ef5ce39c60629570259145cf22570e6.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0702P22F/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0702P22F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0702P22F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}