{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0702P26F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0702P26F","canonicalUrl":"https://aoctrl.com/schneider/BMI0702P26F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0702P26F","rawCanonicalId":null},"summary":{"shortDescription":"Schneider BMI servo motor, BMI0702P26F, three-phase, 400W-900W, IP65, 12.05 in, with holding brake and absolute single-turn Hiperface feedback.","salesMarkdown":"The Schneider BMI0702P26F is a three-phase servo motor delivering 400 W at 208 V, 800 W at 400 V, and 900 W at 480 V three-phase supplies. It comes with an integrated holding brake rated at 3 N·m and an absolute single-turn SinCos Hiperface feedback encoder that remembers the position at power-off — no homing cycle needed. The motor is IP65-rated and cooled by natural convection, so it can sit in washdown zones without a dedicated enclosure. ## Mounting & Connection Mounts to an international standard flange with a 70 mm centering collar and 5.5 mm mounting holes. The shaft is 11 mm diameter, 23 mm long, untapped. Electrical connection is via a PCB connector — plan for a right-angle header on your cable harness. The integrated EMC filter saves a separate component and panel space. ## Field Service Note The holding brake draws 5 W when engaged. If swapping a unit mid-production, note that the Hiperface encoder requires a compatible drive — verify your servo drive supports absolute single-turn SinCos before swapping. The natural convection cooling means no fan to fail, but ensure ambient temperature stays within the motor's derating curve if stalled for more than a few seconds.","metaTitle":"Schneider BMI0702P26F Servo Motor, 400-900W, IP65","metaDescription":"BMI0702P26F servo motor in active production. Three-phase, IP65, 2.4 Nm nominal, 3 Nm holding brake, absolute Hiperface feedback. 12.05 in length. Sourced to order upon RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Phase":"Three phase","Length":"12.05 in (306 mm)","Category":"US1PC5618287","Shaft end":"Untapped","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"With","Nominal speed":"1800 rpm 208 V three phase 3600 rpm 400 V three phase 4400 rpm 480 V three phase","Rotor inertia":"1.24 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"21.2 lbf.in (2.4 N.m) 208 V three phase 19.5 lbf.in (2.2 N.m) 400 V three phase 17.7 lbf.in (2 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.15 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"77.18 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"60.2 lbf.in (6.8 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 60.2 lbf.in (6.8 N.m) 480 V three phase","Stator inductance":"25.75 mH 68 °F (20 °C)","Stator resistance":"8.89 Ohm 68 °F (20 °C)","Brake pull-in power":"5 W","Maximum current Irms":"9.6 A 208 V, three phase 9.6 A 400 V, three phase 9.6 A 480 V, three phase","Nominal output power":"400 W 208 V three phase 800 W 400 V three phase 900 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"208...480 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Output current 3s peak":"6 A 400 V 3 s","Continuous stall torque":"21.95 lbf.in (2.48 N.m) 208...480 V three phase","IP Degree of Protection":"IP65","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"2 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"32768 points/turn","[Us] rated supply voltage":"208...480 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"2.9 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,440.00 – $2,365.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3ef5ce39c60629570259145cf22570e6.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0702P26F/alternatives.json"},"ai":{"faq":[{"question":"What is the phase configuration?","answer":"This motor is a three-phase design."},{"question":"What is the overall length of the motor?","answer":"The length is 12.05 inches (306 mm)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0702P26F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0702P26F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}