{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0702T01F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0702T01F","canonicalUrl":"https://aoctrl.com/schneider/BMI0702T01F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0702T01F","rawCanonicalId":null},"summary":{"shortDescription":"Bosch Rexroth BMI0702T01F, Single-phase servo motor, 4000 rpm, 700 W at 230 V, with integrated holding brake, Hiperface absolute single-turn feedback, and EMC filter.","salesMarkdown":"The Bosch Rexroth BMI0702T01F is a single-phase servo motor designed for 100...240 VAC supply. At 230 V it delivers 700 W nominal output and 4000 rpm; at 115 V the output drops to 400 W and 1700 rpm. The integrated holding brake provides 3 Nm of holding torque, and the Hiperface absolute single-turn SinCos feedback gives position data for closed-loop control. The motor is rated IP54 on the shaft and IP65 on the housing, with natural convection cooling — no fan, so duty cycle may be limited under continuous heavy load. ## Ratings in context The holding brake draws 5 W pull-in power and is rated for 3 Nm static holding torque. This is sufficient for vertical-axis loads within the motor's torque range, but dynamic braking should be handled by the drive's braking resistor — the brake is a holding brake, not a dynamic stop brake.","metaTitle":"Bosch Rexroth BMI0702T01F Servo Motor, 4000 rpm, Single Phas","metaDescription":"Active-production single-phase servo motor with integrated holding brake and Hiperface feedback. Rated 700 W at 230 V, 4000 rpm. IP65 housing, RFQ only.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Phase":"Single phase","Length":"12.05 in (306 mm)","Category":"US1PC5618287","Shaft end":"Untapped","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"With","Nominal speed":"4000 rpm 230 V single phase 1700 rpm 115 V single phase","Rotor inertia":"1.24 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 15.05 lbf.in (1.7 N.m) 230 V single phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.63 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"42.1 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"58.4 lbf.in (6.6 N.m) 115 V single phase 58.4 lbf.in (6.6 N.m) 230 V single phase","Stator inductance":"7.8 mH 68 °F (20 °C)","Stator resistance":"2.7 Ohm 68 °F (20 °C)","Brake pull-in power":"5 W","Maximum current Irms":"17.7 A 230 V, single phase 17.7 A 115 V, single phase","Nominal output power":"700 W 230 V single phase 400 W 115 V single phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"100...240 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Output current 3s peak":"10.5 A 230 V 1 s","Continuous stall torque":"21.95 lbf.in (2.48 N.m) 115...230 V single phase","IP Degree of Protection":"Shaft IP54 Housing IP65","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.6 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"2.6 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"115...230 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"2.89 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/345e4d30ee8da2b5a1622860dfbf50e3.pdf","sourceUrl":"https://www.se.com/ie/en/product/BMI0702T01F/servo-motor-bmi-1phase-untapped-ip54-single-turn-131072-p-t-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0702T01F/alternatives.json"},"ai":{"faq":[{"question":"What is the phase configuration of this motor?","answer":"It is a single-phase motor, designed for 100...240 V single-phase AC supply."},{"question":"What is the physical length of this motor?","answer":"The length is 12.05 inches (306 mm)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0702T01F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0702T01F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}