{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0702T06A","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0702T06A","canonicalUrl":"https://aoctrl.com/schneider/BMI0702T06A","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0702T06A","rawCanonicalId":null},"summary":{"shortDescription":"BMI series, single-phase servo motor, BMI0702T06A, 2.48 N·m continuous stall torque, 6.6 N·m peak, 4000 rpm, absolute single-turn SinCos Hiperface feedback, integrated EMC filter, shaft IP54 housing IP65.","salesMarkdown":"The BMI0702T06A is a single-phase servo motor from the BMI series, delivering 2.48 N·m continuous stall torque across the full 115–230 V supply range. That's the figure to use for sizing a continuous-duty load — the motor can hold that torque indefinitely at standstill without exceeding thermal limits. Peak stall torque reaches 6.6 N·m for short bursts up to 1 second at 230 V (10.5 A peak current), defining the acceleration headroom. The torque constant is 0.63 N·m/A measured at 68 °F (20 °C), so every ampere of RMS current produces 0.63 N·m of torque at that temperature. Stator resistance sits at 2.7 Ohm and inductance at 7.8 mH, both at 20 °C — these govern the motor's electrical time constant and the drive's current regulator tuning. Back EMF constant is 42.1 V/krpm at 20 °C; use it to calculate the bus voltage needed to reach a given speed. Supply voltage limits are 100…240 V single phase, 50/60 Hz with a ±5 % tolerance on frequency. Nominal output power and speed differ by voltage: 700 W at 4000 rpm on 230 V, 400 W at 1700 rpm on 115 V. The continuous stall torque remains the same regardless, so the motor is wound for constant torque over voltage but varying power. ## Mounting, feedback, and protection The motor uses an international standard flange with a 2.8 in (70 mm) flange size and a 2.4 in (60 mm) centring collar depth of 0.10 in (2.5 mm). Shaft diameter is 0.4 in (11 mm) with a 0.9 in (23 mm) shaft length, untapped and without a second shaft end. Overall length is 10.6 in (268 mm). Mounting holes are 0.2 in (5.5 mm) diameter; maximum radial force is 710 N at 1000 rpm, derating to 390 N at 6000 rpm. Maximum axial force is 0.2 times the radial force. Cooling is natural convection, so no forced airflow is required. The housing carries IP65 protection; the shaft end is rated IP54. Electrical connection is via a printed circuit board connector. Integrated EMC filter is built in, simplifying panel wiring for conducted emissions.","metaTitle":"BMI0702T06A Single-Phase Servo Motor, 2.48 N·m, 4000 rpm","metaDescription":"Active-production BMI0702T06A single-phase servo motor. Continuous stall torque 2.48 N·m, peak 6.6 N·m. Absolute single-turn SinCos Hiperface feedback. Integrated EMC filter, IP65","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Phase":"Single phase","Length":"10.6 in (268 mm)","Category":"US1PC5618287","Shaft end":"Untapped","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"Without","Nominal speed":"4000 rpm 230 V single phase 1700 rpm 115 V single phase","Rotor inertia":"1.13 kg.cm²","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 15.05 lbf.in (1.7 N.m) 230 V single phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.63 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"42.1 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"58.4 lbf.in (6.6 N.m) 115 V single phase 58.4 lbf.in (6.6 N.m) 230 V single phase","Stator inductance":"7.8 mH 68 °F (20 °C)","Stator resistance":"2.7 Ohm 68 °F (20 °C)","Maximum current Irms":"17.7 A 230 V, single phase 17.7 A 115 V, single phase","Nominal output power":"700 W 230 V single phase 400 W 115 V single phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"100...240 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Output current 3s peak":"10.5 A 230 V 1 s","Continuous stall torque":"21.95 lbf.in (2.48 N.m) 115...230 V single phase","IP Degree of Protection":"Shaft IP54 Housing IP65","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.6 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"2.6 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"32768 points/turn","[Us] rated supply voltage":"115...230 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"2.89 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,210.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3ef5ce39c60629570259145cf22570e6.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0702T06A/alternatives.json"},"ai":{"faq":[{"question":"What are the key continuous duty torque ratings?","answer":"The continuous stall torque is 2.48 N·m (21.95 lbf.in) across the entire 115–230 V supply range. Nominal torque varies by voltage: 2.2 N·m at 115 V (1700 rpm) and 1.7 N·m at 230 V (4000 rpm). Peak stall torque is 6.6 N·m for short-duration loads."},{"question":"What is the phase count and supply requirements?","answer":"Single-phase operation. Supply voltage limits are 100…240 V, frequency 50/60 Hz ±5 % tolerance. The motor has an integrated EMC filter rated for that supply."},{"question":"What is the overall length of the motor?","answer":"10.6 inches (268 mm) from flange face to back of housing, excluding connector protrusion."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0702T06A","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0702T06A when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}