{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0702T06F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0702T06F","canonicalUrl":"https://aoctrl.com/schneider/BMI0702T06F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0702T06F","rawCanonicalId":null},"summary":{"shortDescription":"Schneider BMI series, BMI0702T06F single-phase servo motor, 4000/1700 rpm, with holding brake and absolute Hiperface feedback.","salesMarkdown":"The Schneider BMI0702T06F is a single-phase servo motor that runs on either 230 V or 115 V supply, giving you 4000 rpm at 230 V and 1700 rpm at 115 V. That dual-voltage flexibility is rare in servo motors—most expect three-phase or a tightly regulated DC bus. If your plant floor only has single-phase taps (common in older lines or smaller cells), this motor meets it where it is, no need to pull a new feeder. The integrated EMC filter is the feature that saves the most panel space and wiring time. In a typical upgrade you'd budget for an external filter and the bracketry/cabling to go with it; here it's inside the motor's connector housing. Natural convection cooling means no fan, so no fan noise or dust ingestion—good for clean-room or food-and-beverage applications. Holding brake rated at 3 Nm holds the vertical axis steady on power loss. Continuous stall torque is 2.48 Nm across the voltage range, so the brake has reserve. The absolute single-turn SinCos Hiperface feedback remembers shaft position after a power cycle—keeps the homing routine out of your startup sequence, which matters when you're swapping a motor on a line that needs to be back up in minutes. Mounting uses an international standard flange, 70 mm centring collar diameter with four through-holes on a 5.5 mm diameter bolt circle. Shaft is 11 mm diameter, 23 mm long, untapped. The electrical connection is a PCB connector—plan your cable route to that mating piece. IP rating splits: shaft seal is IP54, housing is IP65. Accepts up to 710 N radial force at 1000 rpm. If your old motor had a braked shaft extension, check that the holding torque and flange pattern align; this unit has no second shaft end.","metaTitle":"BMI0702T06F Servo Motor, Single-Phase 4000 rpm, Brake","metaDescription":"Active production servo motor with integrated EMC filter and holding brake. Single-phase 230/115 V, 4000/1700 rpm, absolute SinCos Hiperface feedback. Sourced to order. RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Phase":"Single phase","Length":"12.05 in (306 mm)","Category":"US1PC5618287","Shaft end":"Untapped","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"With","Nominal speed":"4000 rpm 230 V single phase 1700 rpm 115 V single phase","Rotor inertia":"1.24 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 15.05 lbf.in (1.7 N.m) 230 V single phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.63 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"42.1 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"58.4 lbf.in (6.6 N.m) 115 V single phase 58.4 lbf.in (6.6 N.m) 230 V single phase","Stator inductance":"7.8 mH 68 °F (20 °C)","Stator resistance":"2.7 Ohm 68 °F (20 °C)","Brake pull-in power":"5 W","Maximum current Irms":"17.7 A 230 V, single phase 17.7 A 115 V, single phase","Nominal output power":"700 W 230 V single phase 400 W 115 V single phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"100...240 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Output current 3s peak":"10.5 A 230 V 1 s","Continuous stall torque":"21.95 lbf.in (2.48 N.m) 115...230 V single phase","IP Degree of Protection":"Shaft IP54 Housing IP65","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.6 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"2.6 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"32768 points/turn","[Us] rated supply voltage":"115...230 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"2.89 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$910.59 – $1,390.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3ef5ce39c60629570259145cf22570e6.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0702T06F/alternatives.json"},"ai":{"faq":[{"question":"What phase does the BMI0702T06F require?","answer":"Single phase. It operates on either 115 V or 230 V single-phase AC, with different speed/torque ratings at each voltage."},{"question":"What is the physical length of this motor?","answer":"Length is 12.05 in (306 mm)."},{"question":"What type of feedback does it have?","answer":"Absolute single-turn SinCos Hiperface. No homing cycle needed after a power loss."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0702T06F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0702T06F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}