{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0702T22F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0702T22F","canonicalUrl":"https://aoctrl.com/schneider/BMI0702T22F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0702T22F","rawCanonicalId":null},"summary":{"shortDescription":"Bosch Rexroth BMI series, BMI0702T22F servo motor, single phase, 700 W nominal output, with holding brake and absolute multiturn Hiperface encoder.","salesMarkdown":"## Motor Single-phase servo motor from the Bosch Rexroth BMI series, built for applications where three-phase power isn't on the panel. The BMI0702T22F runs on 100–240 VAC, 50/60 Hz, and delivers 700 W output on a 230 V line or 400 W on 115 V. At 230 V, nominal speed is 4000 rpm; drop to 115 V and it tops out at 1700 rpm. The integrated EMC filter keeps conducted emissions off the line — eliminates an external filter on the panel door. Feedback is an absolute multiturn SinCos Hiperface encoder — no homing sequence after a power cycle, position is retained even with the motor rotated by hand. The holding brake (3 Nm, 26.6 lbf.in) holds vertical loads at standstill; brake pull-in power is 5 W. IP65 rating means it survives washdown and wet environments as long as the cable gland is seated. Single-phase input simplifies installation in retrofit sites where only a line and neutral are available. The integrated EMC filter is the bigger convenience — no extra component to wire and no ground-loop headache from a third-party filter. The Hiperface encoder pairs with Rexroth drives natively; if you're mating it to a third-party drive, verify the resolver emulation or encoder conversion required. Maximum current draw is 17.7 A RMS per phase at either voltage level.","metaTitle":"Bosch Rexroth BMI0702T22F Servo Motor, Single-Phase, 700W","metaDescription":"Single-phase servo motor with integrated EMC filter, holding brake, and Hiperface absolute multiturn encoder. Active production. Specify BMI0702T22F for your BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Phase":"Single phase","Length":"12.05 in (306 mm)","Category":"US1PC5618287","Shaft end":"Untapped","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"With","Nominal speed":"4000 rpm 230 V single phase 1700 rpm 115 V single phase","Rotor inertia":"1.24 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 15.05 lbf.in (1.7 N.m) 230 V single phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.63 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"42.1 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"58.4 lbf.in (6.6 N.m) 115 V single phase 58.4 lbf.in (6.6 N.m) 230 V single phase","Stator inductance":"7.8 mH 68 °F (20 °C)","Stator resistance":"2.7 Ohm 68 °F (20 °C)","Brake pull-in power":"5 W","Maximum current Irms":"17.7 A 230 V, single phase 17.7 A 115 V, single phase","Nominal output power":"700 W 230 V single phase 400 W 115 V single phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"100...240 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Output current 3s peak":"10.5 A 230 V 1 s","Continuous stall torque":"21.95 lbf.in (2.48 N.m) 115...230 V single phase","IP Degree of Protection":"IP65","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.6 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"2.6 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"131072 points/turn x 4096 turns","[Us] rated supply voltage":"115...230 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"2.89 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$150.09","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3ef5ce39c60629570259145cf22570e6.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0702T22F/alternatives.json"},"ai":{"faq":[{"question":"What is the supply voltage and phase requirement?","answer":"Single-phase AC, 100–240 VAC, 50/60 Hz ±5%."},{"question":"What is the physical length of the motor?","answer":"12.05 in (306 mm) overall."},{"question":"What type of encoder does it use?","answer":"Absolute multiturn SinCos Hiperface encoder – position is retained without move-to-home on power-up."},{"question":"What is the torque at nominal speed on 230 V?","answer":"2.2 Nm (19.5 lbf.in). On 115 V, nominal torque is 1.7 Nm (15.05 lbf.in)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0702T22F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0702T22F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}