{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0702T27F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0702T27F","canonicalUrl":"https://aoctrl.com/schneider/BMI0702T27F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0702T27F","rawCanonicalId":null},"summary":{"shortDescription":"BMI0702T27F, single-phase servo motor, 4000 rpm at 230 V, integrated EMC filter, absolute multiturn SinCos Hiperface feedback, holding brake, natural convection cooled.","salesMarkdown":"## Motor identity and supply constraints The BMI0702T27F is a single-phase servo motor with an integrated EMC filter, designed to run directly from a single-phase AC supply without a line filter in most installations. At 230 VAC it delivers 4000 rpm; at 115 VAC the speed drops to 1700 rpm — match the input voltage to your line before commissioning. The nominal torque also shifts: 2.2 N·m at 115 V, 1.7 N·m at 230 V, so the lower-voltage winding actually yields higher torque density in this frame. ## Feedback and braking Feedback is an absolute multiturn SinCos Hiperface encoder — no homing on power-up, position is retained through a power cycle. This matters for packaging and pick-and-place axes where a home routine wastes cycle time. An integrated holding brake provides 3 N·m static torque, sufficient to hold vertical loads within the motor's rated output range. The brake coil draws 5 W; confirm your drive can supply the hold current without a separate brake supply. ## Mechanical footprint and mounting Flange size is 70 mm square with an international standard mounting pattern. The shaft is 11 mm diameter, 23 mm long, untapped — use a keyed coupling or clamp-on hub. Overall length is 306 mm (12.05 in) including the encoder and brake housing. Centring collar depth is 2.5 mm; mounting holes accept M5 fasteners. The IP65 rating means the motor can be washed down in food-grade applications provided the connector is properly mated.","metaTitle":"BMI0702T27F Single Phase Servo, Absolute Encoder, Brake","metaDescription":"BMI0702T27F single-phase servo motor with absolute multiturn SinCos Hiperface feedback and holding brake. 4000 rpm at 230 VAC, 1700 rpm at 115 VAC. IP65. Currently in active produc","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Phase":"Single phase","Length":"12.05 in (306 mm)","Category":"US1PC5618287","Shaft end":"Untapped","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"0.9 in (23 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"With","Nominal speed":"4000 rpm 230 V single phase 1700 rpm 115 V single phase","Rotor inertia":"1.24 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 15.05 lbf.in (1.7 N.m) 230 V single phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.63 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"42.1 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"58.4 lbf.in (6.6 N.m) 115 V single phase 58.4 lbf.in (6.6 N.m) 230 V single phase","Stator inductance":"7.8 mH 68 °F (20 °C)","Stator resistance":"2.7 Ohm 68 °F (20 °C)","Brake pull-in power":"5 W","Maximum current Irms":"17.7 A 230 V, single phase 17.7 A 115 V, single phase","Nominal output power":"700 W 230 V single phase 400 W 115 V single phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"100...240 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Output current 3s peak":"10.5 A 230 V 1 s","Continuous stall torque":"21.95 lbf.in (2.48 N.m) 115...230 V single phase","IP Degree of Protection":"IP65","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.6 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"2.6 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"32768 points/turn x 4096 turns","[Us] rated supply voltage":"115...230 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"2.89 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/15e235241f58e80f43dad7d398e56899.pdf","sourceUrl":"https://www.se.com/ie/en/product/BMI0702T27F/servo-motor-bmi-1phase-untapped-ip65-multiturn-32768-p-t-x-4096-t-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0702T27F/alternatives.json"},"ai":{"faq":[{"question":"What is the phase configuration of the BMI0702T27F?","answer":"It is a single-phase motor, designed to operate on single-phase AC mains without a phase converter."},{"question":"What is the overall length of the BMI0702T27F?","answer":"The motor length is 12.05 inches (306 mm), including the encoder and holding brake housing."},{"question":"What feedback type does the BMI0702T27F use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder, which retains position through power cycles and eliminates the need for a home routine."},{"question":"What is the holding torque of the integrated brake?","answer":"The holding brake provides 3 N·m (26.6 lbf·in) static torque, rated to hold vertical loads within the motor's capacity."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0702T27F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0702T27F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}