{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0703P02F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0703P02F","canonicalUrl":"https://aoctrl.com/schneider/BMI0703P02F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0703P02F","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BMI series servo motor, BMI0703P02F, three-phase, 900 W nominal output at 400 V, 3300 rpm, with holding brake and absolute multiturn SinCos Hiperface feedback.","salesMarkdown":"## Key ratings for drive selection The BMI0703P02F: Torque constant is 1.41 Nm/A at 20°C, and back EMF constant is 95.39 V/krpm—these numbers set the Kt and Ke for drive tuning. Stator resistance is 7.99 Ω and inductance 25.6 mH, both at 20°C. Peak stall torque reaches 8.6 Nm across all supply voltages (208, 400, 480 V three-phase), and maximum continuous current is 12.5 A. Nominal output power is 900 W at 400 V and 480 V, dropping to 450 W at 208 V. Keep the continuous stall torque at 3.4 Nm for sustained holding. The 10-pole rotor gives a relatively high torque density. Radial force limits drop with speed: 730 N at 1000 rpm, 580 N at 2000 rpm, 460 N at 4000 rpm. Axial force is capped at 0.2 × Fr. Ensure the load overhung moment stays within these curves to avoid bearing damage. ## Mounting and mechanical interface Shaft diameter is 14 mm (0.6 in) with a 30 mm shaft length, untapped end. Flange size is 70 mm (2.8 in) with a centring collar depth of 2.5 mm. Housing IP65, shaft IP54. Integrated EMC filter reduces radiated emissions from the motor cables—mount the motor close to the drive to keep the filter effective.","metaTitle":"Schneider BMI0703P02F Servo Motor, Three-Phase, 2.9 Nm, 3300","metaDescription":"Current-production three-phase servo motor, 2.9 Nm nominal torque at 400V, 900W output, 3300 rpm, integrated brake and Hiperface encoder. Sourced to order. RFQ for lead time.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Phase":"Three phase","Length":"13.3 in (339 mm)","Category":"US1PC5618287","Shaft end":"Untapped","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"With","Nominal speed":"3300 rpm 400 V three phase 1600 rpm 208 V three phase 3900 rpm 480 V three phase","Rotor inertia":"1.78 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"25.7 lbf.in (2.9 N.m) 208 V three phase 23.9 lbf.in (2.7 N.m) 400 V three phase 20.4 lbf.in (2.3 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.41 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"95.39 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"76.1 lbf.in (8.6 N.m) 208 V three phase 76.1 lbf.in (8.6 N.m) 400 V three phase 76.1 lbf.in (8.6 N.m) 480 V three phase","Stator inductance":"25.6 mH 68 °F (20 °C)","Stator resistance":"7.99 Ohm 68 °F (20 °C)","Brake pull-in power":"5 W","Maximum current Irms":"12.5 A 400 V, three phase 12.5 A 480 V, three phase 12.5 A 208 V, three phase","Nominal output power":"900 W 400 V three phase 900 W 480 V three phase 450 W 208 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"208...480 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"3","Output current 3s peak":"6 A 400 V 3 s","Continuous stall torque":"30.09 lbf.in (3.4 N.m) 208...480 V three phase","IP Degree of Protection":"Shaft IP54 Housing IP65","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"2 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"131072 points/turn x 4096 turns","[Us] rated supply voltage":"208...480 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"3.2 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3,160.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3ef5ce39c60629570259145cf22570e6.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0703P02F/alternatives.json"},"ai":{"faq":[{"question":"What phase is BMI0703P02F?","answer":"It is a three-phase servo motor."},{"question":"What is the overall length of BMI0703P02F?","answer":"Length is 13.3 inches (339 mm)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0703P02F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0703P02F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}