{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0703P06A","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0703P06A","canonicalUrl":"https://aoctrl.com/schneider/BMI0703P06A","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0703P06A","rawCanonicalId":null},"summary":{"shortDescription":"Bosch Rexroth BMI0703P06A three-phase servo motor, 900W, 2.9 Nm nominal torque, absolute single-turn SinCos Hiperface feedback, IP54/IP65.","salesMarkdown":"The Bosch Rexroth BMI0703P06A is a three-phase servo motor delivering 900 W nominal output on a 400 V supply, with absolute single-turn SinCos Hiperface feedback. Rated torque depends on supply voltage: 2.9 Nm at 208 V, 2.7 Nm at 400 V, and 2.3 Nm at 480 V. Peak stall torque hits 8.6 Nm across the entire voltage range, so the motor can handle short overloads without derating. Feedback is absolute single-turn SinCos Hiperface — no homing sequence required on power-up; position is known immediately after the drive reads the encoder. Mechanical interface: 70 mm flange (international standard), 14 mm shaft diameter, 30 mm shaft length. The shaft end is untapped — no threaded hole for a face-mounted coupling, so plan for a clamp-style hub. Length is 300 mm (11.8 in) overall. The motor has an integrated EMC filter, which cuts panel space and avoids an external filter for drive-side compliance. Protection: housing IP65, shaft IP54. Cooling is natural convection — no fan needed, but keep adequate clearance around the housing for heat dissipation. Electrical connection via printed circuit board connector; specify the mating drive connector to match pinout.","metaTitle":"Bosch Rexroth BMI0703P06A Servo Motor, 900W, Absolute Hiperf","metaDescription":"Active production. Three-phase servo motor, 900W at 400V, 2.9 Nm nominal torque, absolute single-turn SinCos Hiperface feedback. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Phase":"Three phase","Length":"11.8 in (300 mm)","Category":"US1PC5618287","Shaft end":"Untapped","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"Without","Nominal speed":"3300 rpm 400 V three phase 1600 rpm 208 V three phase 3900 rpm 480 V three phase","Rotor inertia":"1.67 kg.cm²","Nominal torque":"25.7 lbf.in (2.9 N.m) 208 V three phase 23.9 lbf.in (2.7 N.m) 400 V three phase 20.4 lbf.in (2.3 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.41 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"95.39 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"76.1 lbf.in (8.6 N.m) 208 V three phase 76.1 lbf.in (8.6 N.m) 400 V three phase 76.1 lbf.in (8.6 N.m) 480 V three phase","Stator inductance":"25.6 mH 68 °F (20 °C)","Stator resistance":"7.99 Ohm 68 °F (20 °C)","Maximum current Irms":"12.5 A 400 V, three phase 12.5 A 480 V, three phase 12.5 A 208 V, three phase","Nominal output power":"900 W 400 V three phase 900 W 480 V three phase 450 W 208 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"208...480 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"3","Output current 3s peak":"6 A 400 V 3 s","Continuous stall torque":"30.09 lbf.in (3.4 N.m) 208...480 V three phase","IP Degree of Protection":"Shaft IP54 Housing IP65","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"2 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"32768 points/turn","[Us] rated supply voltage":"208...480 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"3.2 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,585.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3ef5ce39c60629570259145cf22570e6.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0703P06A/alternatives.json"},"ai":{"faq":[{"question":"What is BMI0703P06A's listed phase?","answer":"Three-phase."},{"question":"What is BMI0703P06A's listed length?","answer":"11.8 in (300 mm)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0703P06A","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0703P06A when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}