{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0703P11F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0703P11F","canonicalUrl":"https://aoctrl.com/schneider/BMI0703P11F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0703P11F","rawCanonicalId":null},"summary":{"shortDescription":"Schneider BMI0703P11F Lexium 32I — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.","salesMarkdown":"## Overview The BMI0703P11F is a Schneider Lexium 32i servo motor, 10-pole, three-phase, rated 900 W continuous power and 3.4 N·m torque at 480 V AC. It includes an integrated holding brake and an absolute single-turn SinCos Hiperface encoder with 131072 points/turn resolution. The motor is rated IP54, has a keyed shaft, and is cooled by natural convection. It is compatible with Lexium 32i drive control units LXM32i CANopen and LXM32i EtherCAT. Compared to the brake-less BMI0703P12A, the BMI0703P11F includes a holding brake and has a rotor inertia of 1.78 kg·cm² versus 1.67 kg·cm² — the higher inertia from the brake adds resistance to axis deceleration, a factor when sizing the drive's braking resistor. The BMI0703P11F uses an absolute single-turn SinCos Hiperface encoder (131072 points/turn), while the BMI0703P12A uses an absolute multiturn SinCos Hiperface encoder (131072 points/turn x 4096 turns) — choose the single-turn variant when position tracking over multiple shaft revolutions is not required. For washdown environments, the BMI0703P21F offers IP65 protection versus the BMI0703P11F's IP54, and has an untapped shaft end instead of keyed — verify shaft coupling compatibility before substituting. ## Lifecycle","metaTitle":"Schneider BMI0703P11F Lexium 32i Servo Motor, 900 W, 3.4 N·m, IP54, Brake","metaDescription":"Schneider Lexium 32i BMI0703P11F servo motor: 900 W, 3.4 N·m, IP54, keyed shaft, holding brake, single-turn Hiperface encoder, 480 V three-phase.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Phase":"Three phase","Length":"13.3 in (339 mm)","Category":"US1PC5618287","Key width":"0.2 in (5 mm)","Shaft end":"Keyed","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"With","Nominal speed":"3300 rpm 400 V three phase 1600 rpm 208 V three phase 3900 rpm 480 V three phase","Rotor inertia":"1.78 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"25.7 lbf.in (2.9 N.m) 208 V three phase 23.9 lbf.in (2.7 N.m) 400 V three phase 20.4 lbf.in (2.3 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.41 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"95.39 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"76.1 lbf.in (8.6 N.m) 208 V three phase 76.1 lbf.in (8.6 N.m) 400 V three phase 76.1 lbf.in (8.6 N.m) 480 V three phase","Stator inductance":"25.6 mH 68 °F (20 °C)","Stator resistance":"7.99 Ohm 68 °F (20 °C)","Brake pull-in power":"5 W","Maximum current Irms":"12.5 A 400 V, three phase 12.5 A 480 V, three phase 12.5 A 208 V, three phase","Nominal output power":"900 W 400 V three phase 900 W 480 V three phase 450 W 208 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"208...480 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"3","Output current 3s peak":"6 A 400 V 3 s","Continuous stall torque":"30.09 lbf.in (3.4 N.m) 208...480 V three phase","IP Degree of Protection":"Shaft IP54 Housing IP65","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"2 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"208...480 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"3.2 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/909b3cd75fa568b1b991ac82876f46a7.pdf","sourceUrl":"https://www.se.com/ie/en/product/BMI0703P11F/servo-motor-bmi-3phase-keyed-ip54-single-turn-131072-p-t-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0703P11F/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0703P11F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0703P11F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}