{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0703P12F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0703P12F","canonicalUrl":"https://aoctrl.com/schneider/BMI0703P12F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0703P12F","rawCanonicalId":null},"summary":{"shortDescription":"BMI0703P12F three-phase servo motor, absolute multiturn Hiperface feedback, holding brake, integrated EMC filter, 2.9 Nm nominal torque at 400V.","salesMarkdown":"The BMI0703P12F is a three-phase servo motor from the BMI series, rated for 208–480 V supply and delivering 2.9 Nm nominal torque at 400 V three-phase. It carries an absolute multiturn SinCos Hiperface feedback encoder, so the drive knows shaft position at power-up without a homing move—critical for multi-axis pick-and-place or gantry systems that must resume a known position after a power cycle. The holding brake holds 3 Nm (26.6 lbf.in) with a 5 W pull-in power, so a vertical axis on a packaging or material-handling machine stays put when power drops without an external spring-applied brake. Integrated EMC filter and natural convection cooling keep the panel wiring lean—no external filter needed and no forced-air fan to maintain or fail. Nominal torque varies with supply voltage: 2.9 Nm at 208 V, 2.7 Nm at 400 V, and 2.3 Nm at 480 V. Peak stall torque reaches 8.6 Nm across all three voltage ranges, so the motor can handle short overloads for acceleration or intermittent loads. Continuous stall torque of 3.4 Nm means the motor can hold a load indefinitely at standstill without overheating—useful for clamping or indexing applications. Nominal speed changes with line voltage: 3300 rpm at 400 V, 1600 rpm at 208 V, and 3900 rpm at 480 V. A 10-pole design gives high torque density at low speeds, so you may not need a gearbox in direct-drive rotary tables. ## Mechanical and environmental integration Mounts on an international standard flange sized 70 mm (2.8 in). The keyed shaft is 14 mm diameter with a 30 mm keyed length—common for pulleys, couplings, or pinion gears in belt-driven or rack-and-pinion stages. Centring collar depth is 2.5 mm for pilot-mount repeatability. Housing is IP65, shaft seal is IP54. That means the motor survives washdowns and dusty environments without an add-on cover—but don't direct high-pressure spray at the shaft seal. Cooling is natural convection, so maintain clearance around the fins; no forced-air gaps to manage. Electrical connection uses a printed circuit board connector common on servo motors—mate with a right-angle header or direct solder cup. Feedback and power exit separately, so keep them in separate cable trays to avoid coupling noise from the brake or power cable. Listed as current production (active lifecycle stage) with no last-time-buy or phase-out notice; standard supply chain terms apply. Order against an RFQ for firm lead times and quantity breaks.","metaTitle":"BMI0703P12F Servo Motor, 2.9 Nm, Hiperface, IP65","metaDescription":"Active three-phase servo motor with absolute multiturn SinCos Hiperface feedback, holding brake, integrated EMC filter. 2.9 Nm nominal torque at 400V. Housing IP65, shaft IP54. Sou","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Phase":"Three phase","Length":"13.3 in (339 mm)","Category":"US1PC5618287","Key width":"0.2 in (5 mm)","Shaft end":"Keyed","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"With","Nominal speed":"3300 rpm 400 V three phase 1600 rpm 208 V three phase 3900 rpm 480 V three phase","Rotor inertia":"1.78 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"25.7 lbf.in (2.9 N.m) 208 V three phase 23.9 lbf.in (2.7 N.m) 400 V three phase 20.4 lbf.in (2.3 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.41 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"95.39 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"76.1 lbf.in (8.6 N.m) 208 V three phase 76.1 lbf.in (8.6 N.m) 400 V three phase 76.1 lbf.in (8.6 N.m) 480 V three phase","Stator inductance":"25.6 mH 68 °F (20 °C)","Stator resistance":"7.99 Ohm 68 °F (20 °C)","Brake pull-in power":"5 W","Maximum current Irms":"12.5 A 400 V, three phase 12.5 A 480 V, three phase 12.5 A 208 V, three phase","Nominal output power":"900 W 400 V three phase 900 W 480 V three phase 450 W 208 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"208...480 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"3","Output current 3s peak":"6 A 400 V 3 s","Continuous stall torque":"30.09 lbf.in (3.4 N.m) 208...480 V three phase","IP Degree of Protection":"Shaft IP54 Housing IP65","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"2 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"131072 points/turn x 4096 turns","[Us] rated supply voltage":"208...480 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"3.2 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3,069.59 – $3,200.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3ef5ce39c60629570259145cf22570e6.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0703P12F/alternatives.json"},"ai":{"faq":[{"question":"What is the holding brake torque?","answer":"The hold ng brake provides 3 N·m (26.6 lbf·in) with a 5 W pull-in power."},{"question":"What IP rating does this motor have?","answer":"The housing is rated IP65 and the shaft seal is IP54, making it suitable for washdown and dusty environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0703P12F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0703P12F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}