{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0703P26F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0703P26F","canonicalUrl":"https://aoctrl.com/schneider/BMI0703P26F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0703P26F","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BMI0703P26F, three-phase servo motor, 70 mm flange, IP65, with holding brake and absolute single-turn SinCos Hiperface feedback, 3300 rpm at 400 V.","salesMarkdown":"## Motor with the bolt-on extras already inside The BMI0703P26F is a three-phase servo motor from Schneider's BMI series, sized for a 70 mm international standard flange and delivering 900 W nominal output at 400 V and 480 V three-phase, 450 W at 208 V three-phase. Nominal torque runs 2.7 Nm at 400 V, 2.9 Nm at 208 V, 2.3 Nm at 480 V; peak stall torque holds 8.6 Nm across all three voltages. The motor ships with an integrated holding brake (3 Nm holding torque, 5 W pull-in power) and an absolute single-turn SinCos Hiperface feedback, so you don't need an external brake chopper or a separate encoder interface. The integrated EMC filter and natural convection cooling keep panel wiring and ventilation simple — no external filter needed for most installations, and no cooling fan to fail. IP65 rating means the motor can handle washdown and dust without an extra cover. ## Sourcing and lifecycle — current and spec'd, no scavenger hunt Verify flange size (70 mm), shaft diameter (14 mm), feedback type (Hiperface absolute single-turn), and voltage range (208–480 V three-phase) against your existing bracket and drive. ## Fitting and wiring notes Motor length is 339 mm from mounting face to rear. Shaft is 14 mm diameter, 30 mm long, untapped — no through-bolt hole. Centring collar depth is 2.5 mm. Electrical connection uses PCB connectors. Motor mounts via four holes on 70 mm flange. Rated for supply voltage 208–480 V three-phase, 50/60 Hz ±5 %. Maximum current Irms is 12.5 A at any of the three voltage levels. Continuous stall torque is 3.4 Nm across the full voltage range. The motor has 10 poles, three stacks. For radial load capacity, see the speed-dependent Fr values — 730 N at 1000 rpm down to 400 N at 6000 rpm. Axial force limit is 20 % of the radial load at the given speed.","metaTitle":"Schneider BMI0703P26F servo motor, 3-ph, IP65, brake, Hiperf","metaDescription":"Three-phase BMI servo motor with holding brake, absolute Hiperface encoder, IP65, 3300 rpm at 400 V. Active production. RFQ for current pricing and lead time.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Phase":"Three phase","Length":"13.3 in (339 mm)","Category":"US1PC5618287","Shaft end":"Untapped","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"With","Nominal speed":"3300 rpm 400 V three phase 1600 rpm 208 V three phase 3900 rpm 480 V three phase","Rotor inertia":"1.78 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"25.7 lbf.in (2.9 N.m) 208 V three phase 23.9 lbf.in (2.7 N.m) 400 V three phase 20.4 lbf.in (2.3 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.41 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"95.39 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"76.1 lbf.in (8.6 N.m) 208 V three phase 76.1 lbf.in (8.6 N.m) 400 V three phase 76.1 lbf.in (8.6 N.m) 480 V three phase","Stator inductance":"25.6 mH 68 °F (20 °C)","Stator resistance":"7.99 Ohm 68 °F (20 °C)","Brake pull-in power":"5 W","Maximum current Irms":"12.5 A 400 V, three phase 12.5 A 480 V, three phase 12.5 A 208 V, three phase","Nominal output power":"900 W 400 V three phase 900 W 480 V three phase 450 W 208 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"208...480 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"3","Output current 3s peak":"6 A 400 V 3 s","Continuous stall torque":"30.09 lbf.in (3.4 N.m) 208...480 V three phase","IP Degree of Protection":"IP65","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"2 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"32768 points/turn","[Us] rated supply voltage":"208...480 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"3.2 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,700.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3ef5ce39c60629570259145cf22570e6.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0703P26F/alternatives.json"},"ai":{"faq":[{"question":"What is the BMI0703P26F's phase configuration?","answer":"The motor is specified as three-phase (Three phase) and operates on a supply voltage range of 208–480 V three-phase."},{"question":"What is the physical length of the BMI0703P26F?","answer":"The motor length from the mounting face to the rear is 13.3 inches (339 mm)."},{"question":"What feedback type does the BMI0703P26F use?","answer":"The motor includes an absolute single-turn SinCos Hiperface encoder, which gives position data at power-up without a homing sequence."},{"question":"Does the BMI0703P26F come with a holding brake?","answer":"Yes, an integrated holding brake is included, with a holding torque of 26.6 lbf·in (3 N·m) and a pull-in power of 5 W."},{"question":"What is the IP rating of the BMI0703P26F?","answer":"The motor is rated IP65, meaning it is dust-tight and protected against low-pressure water jets — suitable for washdown environments without additional enclosure."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0703P26F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0703P26F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}