{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0703P27F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0703P27F","canonicalUrl":"https://aoctrl.com/schneider/BMI0703P27F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0703P27F","rawCanonicalId":null},"summary":{"shortDescription":"Lenze BMI0703P27F, three-phase servo motor with 10 poles, IP65, integrated holding brake, absolute multiturn SinCos Hiperface feedback, 70 mm flange, 14 mm shaft, 900 W nominal output at 400 V.","salesMarkdown":"The BMI0703P27F: 10-pole three-phase servo with integrated holding brake and absolute multiturn SinCos Hiperface feedback. IP65-sealed, natural convection cooling — no fan to clog, so it shrugs off the slurry and dust you'd find in a crusher feed belt or flotation cell. The holding brake holds 3 N·m static, enough to secure a vertical load when the line drops. The absolute encoder tracks position through power cycles, so you don't lose zero on a brownout. Listed as current production. No phase-out or last-time-buy window in the record. ## Mounting & Mechanical Fit International standard flange, 70 mm diameter, 14 mm shaft, shaft length 30 mm untapped. Overall length 339 mm (13.3 in). Centring collar depth 2.5 mm. Four mounting holes on 5.5 mm diameter — check the bolt circle against your existing bracket. Shaft radial force capability varies with speed: 730 N at 1000 rpm, dropping to 400 N at 6000 rpm. Axial load max 20% of radial.","metaTitle":"Lenze BMI0703P27F Servo Motor, 3-Phase 10-Pole, IP65, 3 Nm B","metaDescription":"Lenze BMI0703P27F three-phase servo motor, 10 poles, IP65, holding brake, SinCos Hiperface encoder. Rated 900W at 400V. Active production. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Phase":"Three phase","Length":"13.3 in (339 mm)","Category":"US1PC5618287","Shaft end":"Untapped","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"With","Nominal speed":"3300 rpm 400 V three phase 1600 rpm 208 V three phase 3900 rpm 480 V three phase","Rotor inertia":"1.78 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"25.7 lbf.in (2.9 N.m) 208 V three phase 23.9 lbf.in (2.7 N.m) 400 V three phase 20.4 lbf.in (2.3 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.41 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"95.39 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"76.1 lbf.in (8.6 N.m) 208 V three phase 76.1 lbf.in (8.6 N.m) 400 V three phase 76.1 lbf.in (8.6 N.m) 480 V three phase","Stator inductance":"25.6 mH 68 °F (20 °C)","Stator resistance":"7.99 Ohm 68 °F (20 °C)","Brake pull-in power":"5 W","Maximum current Irms":"12.5 A 400 V, three phase 12.5 A 480 V, three phase 12.5 A 208 V, three phase","Nominal output power":"900 W 400 V three phase 900 W 480 V three phase 450 W 208 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"208...480 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"3","Output current 3s peak":"6 A 400 V 3 s","Continuous stall torque":"30.09 lbf.in (3.4 N.m) 208...480 V three phase","IP Degree of Protection":"IP65","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"2 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"32768 points/turn x 4096 turns","[Us] rated supply voltage":"208...480 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"3.2 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3ef5ce39c60629570259145cf22570e6.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0703P27F/alternatives.json"},"ai":{"faq":[{"question":"What shaft and flange dimensions does BMI0703P27F have?","answer":"Shaft diameter 14 mm, shaft length 30 mm, flange size 70 mm. Overall motor length 339 mm (13.3 in). Shaft end is untapped."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0703P27F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0703P27F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}