{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0703P36F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0703P36F","canonicalUrl":"https://aoctrl.com/schneider/BMI0703P36F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0703P36F","rawCanonicalId":null},"summary":{"shortDescription":"BMI0703P36F three-phase servo motor, 3.4 Nm continuous stall torque, IP65, with Hiperface absolute feedback and holding brake.","salesMarkdown":"The BMI0703P36F is a three-phase servo motor running on 208–480 V supply, delivering 3.4 Nm continuous stall torque and a peak of 8.6 Nm across the whole voltage range. It carries an absolute single-turn SinCos Hiperface feedback and a 3 Nm holding brake, so it holds position at power-off without a separate brake controller. Frame uses an international standard flange, 70 mm square, with a 14 mm keyed shaft that extends 30 mm. The centring collar sits 2.5 mm deep. No second shaft end. Natural convection cooling — no fan to wire or fail. IP65 sealing means it can take washdown in a packaging line. ## Electrical and feedback Winding is a 10-pole, 3-stack design with stator resistance 7.99 Ohm and inductance 25.6 mH at 20 °C. Torque constant sits at 1.41 Nm/A, back EMF at 95.39 V/krpm. The integrated EMC filter simplifies panel wiring — no external filter needed for most installations. Power connection is via a printed circuit board connector, not a flying lead.","metaTitle":"BMI0703P36F Servo Motor, 3.4 Nm, 3300 rpm, Hiperface","metaDescription":"BMI0703P36F three-phase servo motor, 3.4 Nm continuous stall torque, 8.6 Nm peak, IP65, holding brake,Hiperface absolute feedback. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Phase":"Three phase","Length":"13.3 in (339 mm)","Category":"US1PC5618287","Key width":"0.2 in (5 mm)","Shaft end":"Keyed","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"With","Nominal speed":"3300 rpm 400 V three phase 1600 rpm 208 V three phase 3900 rpm 480 V three phase","Rotor inertia":"1.78 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"25.7 lbf.in (2.9 N.m) 208 V three phase 23.9 lbf.in (2.7 N.m) 400 V three phase 20.4 lbf.in (2.3 N.m) 480 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"1.41 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"95.39 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"76.1 lbf.in (8.6 N.m) 208 V three phase 76.1 lbf.in (8.6 N.m) 400 V three phase 76.1 lbf.in (8.6 N.m) 480 V three phase","Stator inductance":"25.6 mH 68 °F (20 °C)","Stator resistance":"7.99 Ohm 68 °F (20 °C)","Brake pull-in power":"5 W","Maximum current Irms":"12.5 A 400 V, three phase 12.5 A 480 V, three phase 12.5 A 208 V, three phase","Nominal output power":"900 W 400 V three phase 900 W 480 V three phase 450 W 208 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"208...480 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"3","Output current 3s peak":"6 A 400 V 3 s","Continuous stall torque":"30.09 lbf.in (3.4 N.m) 208...480 V three phase","IP Degree of Protection":"IP65","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"2 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"32768 points/turn","[Us] rated supply voltage":"208...480 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"3.2 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,730.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3ef5ce39c60629570259145cf22570e6.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0703P36F/alternatives.json"},"ai":{"faq":[{"question":"What are the continuous and peak torque ratings?","answer":"Continuous stall torque is 3.4 Nm across the full 208–480 V three-phase range. Peak stall torque is 8.6 Nm, also available at all three voltage levels."},{"question":"What type of feedback does this motor use?","answer":"It uses an absolute single-turn SinCos Hiperface feedback system. No battery backup needed for single-turn position."},{"question":"What is the IP rating and cooling method?","answer":"Rated IP65 for dust and water ingress protection. Cooling is by natural convection only — no external fan or forced air required."},{"question":"Does the motor include a holding brake?","answer":"Yes, a holding brake with 3 Nm holding torque is integrated. The brake pull-in power is 5 W."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0703P36F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0703P36F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}