{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0703T06A","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0703T06A","canonicalUrl":"https://aoctrl.com/schneider/BMI0703T06A","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0703T06A","rawCanonicalId":null},"summary":{"shortDescription":"BMI0703T06A — Bosch Rexroth BMI single-phase servo motor, 700 W at 230 V single phase, absolute single-turn SinCos Hiperface feedback, integrated EMC filter, IP54 shaft/IP65 housing.","salesMarkdown":"## Single-phase servo with Hiperface feedback — integrator quick-fit The BMI0703T06A: Feedback is absolute single-turn SinCos Hiperface, so the drive knows rotor position at power-up — no homing sequence needed after a power cycle. Integrated EMC filter and natural convection cooling mean you can skip an external filter and fan in most cabinets, provided the mounting area has free air circulation. Shaft IP54 housing IP65 — the shaft seal handles splash, but the body is dust-tight and hose-down rated. Use separately sealed connectors if the cable entry sees direct washdown. ## No brake, no second shaft — a clean mechanical build No holding brake and no second shaft end. If your Z-axis needs a brake, you're adding an external one on the load side. The single untapped shaft end is 14 mm diameter by 30 mm long — plain for a clamp-on pulley or coupling. International standard flange — 70 mm square with a 60 mm pilot and 5.5 mm mounting holes. Centring collar is 2.5 mm deep. Drops into any frame with that 70 mm bolt pattern. Electrical connection via a PCB connector — no bulky flying leads. Plan your cable exit to match the connector orientation on the motor body.","metaTitle":"BMI0703T06A Servo Motor, 700W, Single Phase, Hiperface","metaDescription":"Current-production single-phase servo motor, 700 W at 230 V, 400 W at 115 V, Hiperface absolute encoder, IP54/IP65. Sourced to order — RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Phase":"Single phase","Length":"11.8 in (300 mm)","Category":"US1PC5618287","Shaft end":"Untapped","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"Without","Nominal speed":"3200 rpm 230 V single phase 1400 rpm 115 V single phase","Rotor inertia":"1.67 kg.cm²","Nominal torque":"25.7 lbf.in (2.9 N.m) 115 V single phase 19.5 lbf.in (2.2 N.m) 230 V single phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.81 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"54.44 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"76.1 lbf.in (8.6 N.m) 115 V single phase 76.1 lbf.in (8.6 N.m) 230 V single phase","Stator inductance":"2.28 mH 68 °F (20 °C)","Stator resistance":"2.58 Ohm 68 °F (20 °C)","Maximum current Irms":"17.8 A 115 V, single phase 17.8 A 230 V, single phase","Nominal output power":"700 W 230 V single phase 400 W 115 V single phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"100...240 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"3","Output current 3s peak":"10.5 A 230 V 3 s","Continuous stall torque":"30.09 lbf.in (3.4 N.m) 115...230 V single phase","IP Degree of Protection":"Shaft IP54 Housing IP65","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"3.5 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"32768 points/turn","[Us] rated supply voltage":"115...230 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"0.88 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,285.00 – $1,935.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3ef5ce39c60629570259145cf22570e6.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0703T06A/alternatives.json"},"ai":{"faq":[{"question":"What is the phase configuration of the BMI0703T06A?","answer":"It is a single-phase motor."},{"question":"What is the overall length of the BMI0703T06A?","answer":"The overall length is 11.8 inches (300 mm)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0703T06A","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0703T06A when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}