{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0703T07A","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0703T07A","canonicalUrl":"https://aoctrl.com/schneider/BMI0703T07A","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0703T07A","rawCanonicalId":null},"summary":{"shortDescription":"Bosch Rexroth, BMI series, servo motor, BMI0703T07A, 700 W 230 V single phase, 300 mm length, absolute multiturn SinCos Hiperface feedback, integrated EMC filter.","salesMarkdown":"The Bosch Rexroth BMI0703T07A is a single-phase servo motor delivering 700 W on 230 V or 400 W on 115 V. It uses a 70 mm flange, a 14 mm untapped shaft, and comes with an integrated EMC filter — you can skip the external filter if the drive's internal filtering is adequate, but watch for conducted emissions on long cable runs. Rated torque is 3.4 Nm continuous stall (30.09 lbf.in) at 115...230 V, with a peak stall of 8.6 Nm. Continuous stall current 3.5 A, maximum rms current 17.8 A — that's the limit for short-term peaks. The absolute multiturn Hiperface feedback means the drive knows the position immediately after power-up, no homing move needed, which shaves a few seconds off every startup cycle. ## Integration notes Mounts to an international standard flange (70 mm bolt circle). Cooling is natural convection, so keep the motor body free of enclosures that trap heat. Shaft IP54, housing IP65 — fine for washdown if the shaft seal is protected from direct spray.","metaTitle":"Bosch Rexroth BMI0703T07A Servo, 700W Single-Phase, Hiperfac","metaDescription":"Active production BMI0703T07A single-phase servo motor. 700W at 230V, absolute multiturn Hiperface feedback, integrated EMC filter. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Phase":"Single phase","Length":"11.8 in (300 mm)","Category":"US1PC5618287","Shaft end":"Untapped","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"Without","Nominal speed":"3200 rpm 230 V single phase 1400 rpm 115 V single phase","Rotor inertia":"1.67 kg.cm²","Nominal torque":"25.7 lbf.in (2.9 N.m) 115 V single phase 19.5 lbf.in (2.2 N.m) 230 V single phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.81 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"54.44 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"76.1 lbf.in (8.6 N.m) 115 V single phase 76.1 lbf.in (8.6 N.m) 230 V single phase","Stator inductance":"2.28 mH 68 °F (20 °C)","Stator resistance":"2.58 Ohm 68 °F (20 °C)","Maximum current Irms":"17.8 A 115 V, single phase 17.8 A 230 V, single phase","Nominal output power":"700 W 230 V single phase 400 W 115 V single phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"100...240 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"3","Output current 3s peak":"10.5 A 230 V 3 s","Continuous stall torque":"30.09 lbf.in (3.4 N.m) 115...230 V single phase","IP Degree of Protection":"Shaft IP54 Housing IP65","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"3.5 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"32768 points/turn x 4096 turns","[Us] rated supply voltage":"115...230 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"0.88 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,240.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3ef5ce39c60629570259145cf22570e6.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0703T07A/alternatives.json"},"ai":{"faq":[{"question":"What is the phase of BMI0703T07A?","answer":"It is a single-phase servo motor."},{"question":"What is the length of BMI0703T07A?","answer":"The motor length is 11.8 inches (300 mm)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0703T07A","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0703T07A when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}